| Peer-Reviewed

Electrical Property of Laser-Sintered Nanopastes with Reduced Metal Nanoparticles Prepared by Laser Ablation in Liquids

Received: 1 December 2014     Accepted: 9 December 2014     Published: 18 December 2014
Views:       Downloads:
Abstract

Reduced iron, aluminum, copper, and magnesium nanoparticles were produced from iron oxide (Fe3O4), aluminum oxide (Al2O3), copper oxide (CuO), and magnesium oxide (MgO) powders by using laser ablation in liquids, and nanopastes were synthesized with the reduced iron, aluminum, copper, and magnesium nanoparticles. The nanopastes were sintered by using a continuous-wave fiber laser in air atmosphere. The laser-sintered nanopastes consist of polycrystalline metal. The structures of the laser-sintered metal nanopastes were analyzed by SEM and EDX, and their resistivities were evaluated by four-terminal method. The metal nanopastes sintered by hot plate have 2.5- to 11-times-higher resistivities than those of common metals fabricated in blast furnaces. Moreover, the laser-sintered metal nanopastes have 9.5- to 45-times-higher resistivities than those of common metals fabricated in blast furnaces.

Published in Advances in Materials (Volume 3, Issue 6)
DOI 10.11648/j.am.20140306.13
Page(s) 75-88
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Polycrystalline Metal, Laser Sintering, Metal Nanopaste, Laser Ablation in Liquids

References
[1] C. Deckard, "Method and apparatus for producing parts by selective sintering", U.S. Patent 4,863,538, filed Oct. 17, 1986, published Sep. 5, 1989.
[2] A. L. Dearden, P. J. Smith, D. Y. Shin, N. Reis, B. Derby and P. Brien, “A low curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks”, Micronol. Rapid Commun., Vol. 26, pp.315-318, 2005.
[3] J. W. Chung, S. H. Ko, N. R. Bieri, C. P. Grigopoulos and D. Poulikakos, “Conductor micro structures by laser curing of printed gold nanoparticle ink”, Appl. Phys. Let., Vol. 84, pp. 801-803, 2004.
[4] J. Lee, B. Lee, S. Jeong, Y. Kim, “Microstructure and electrical property of laser-sintered Cu complex ink”, Appl. Surf. Sci., Vol. 307, pp.42-45, 2014.
[5] E. Halonen, E. Heinonen, M. Mäntysalo, “The effect of laser sintering process parameters on Cu nanoparticle ink in room conditions”, Opt. and Photonics J., Vol. 3, pp.40-44, 2013.
[6] M. Zenou, O. Ermak, A. Saar and Z. Kotler, “Laser sintering of copper nanoparticles”, J. Phys. D: Appl. Phys., Vol. 47, 025501 -1-11, 2014.
[7] A. Henglein, “Physicochemical properties of small metal par- ticles in solution: “microelectrode” reactions, chemisorption, composite metal particles, and the atom-to-metal transition,” J. of Phys. Chem. B, Vol. 97, pp.5457-5471, 1993.
[8] M. S. Sibbald, G. humanov, and T. M. Cotton, “Reduction of cytochrome c by halide-modified, laser-ablated silver colloids,” J. of Phys. Chem. B, Vol. 100, pp. 4672-4678, 1996.
[9] T. Sasaki, Y. Shimizu, N. koshizaki, “Preparation of metal oxide-based nanomaterials using nanosecond pulsed laser ablation in liquids”, J of Photochem. and Photobiol. A: Chem., Vol. 182, pp.335-341, 2006.
[10] M. Kawasaki, “Laser-induced fragmentative decomposition of Fine CuO powder in acetone as highly productive pathway to Cu and Cu2O nanoparticle”, J. of Phys. Chem. C, Vol. 115, pp.5165-5173, 2011.
[11] K. Yamada, K. Miyajima, and F. Mafune, “Ionization of gold nanoparticles in solution by pulse laser excitation as studied by mass spectrometric detection of gold cluster ions”, J. of Phys. Chem. C, Vol. 111, Article ID 033401, 2007.
[12] T. Saiki, T. Okada, K. Nakamura, T. Karita, Y. Nishikawa, and Y. Iida, “Air cells using negative metal electrodes fabricated by sintering pastes with base metal nanoparticles for efficient utilization of solar energy”, Int. J. of Energy Sci., Vol. 2, No. 6, pp. 228-234, 2012.
[13] T. Saiki, S. Uchida, T. Karita, K. Nakamura, Y. Nichikawa, S. Taniguchi Y. Iida, "Recyclable air fuel cells using sintered Mg nanopastes for solar energy cycle", Proc. the 3rd Advanced Lasers and Photon Sources Conference (ALPS), pp.161-162, Yokohama, Japan, Apr. 24, 2014.
[14] T. Saiki, M. Nakatsuka, K. Imasaki, “Highly efficient lasing action of Nd3+- and Cr3+-doped yttrium aluminum garnet ceramics based on phonon-assisted cross-relaxation using solar light source”, Jpn. J. App. Phys., Vol. 49, 082702-1-8, 2010.
[15] T. Okada, T. Saiki, S. Taniguchi, T. Ueda, K. Nakamura, Y. Nishikawa, and Y. Iida, “Hydrogen production using reduced-iron nanoparticles by laser ablation in liquids”, ISRN Renewable Energy, Vol. 2013, 827681-1-7, 2013.
[16] A. H. Chokshi, A. Rosen, J. Karch, and H. Gleiter, “Diffusional creep of a SiC whisker reinforced Alumina/Zirconia composite”, Scripta Metall., Vol. 23, pp.1679-1683, 1989.
[17] G. Palumbo, S. J. Thorpe, and K. T. Aust, ”On the contribution of triple junctions to the structure and properties of nanocrystalline materials” Scripta Metall. Mater., Vol. 24, pp. 1347-1350, 1990.
[18] National Astronomical Observatory (ed.) : "Rika Nenpyo", p.482, Maruzen, Tokyo (2000).
Cite This Article
  • APA Style

    Taku Saiki, Yukio Iida, Kennan Ri, Marina Yoshida, Yuuki Koga. (2014). Electrical Property of Laser-Sintered Nanopastes with Reduced Metal Nanoparticles Prepared by Laser Ablation in Liquids. Advances in Materials, 3(6), 75-88. https://doi.org/10.11648/j.am.20140306.13

    Copy | Download

    ACS Style

    Taku Saiki; Yukio Iida; Kennan Ri; Marina Yoshida; Yuuki Koga. Electrical Property of Laser-Sintered Nanopastes with Reduced Metal Nanoparticles Prepared by Laser Ablation in Liquids. Adv. Mater. 2014, 3(6), 75-88. doi: 10.11648/j.am.20140306.13

    Copy | Download

    AMA Style

    Taku Saiki, Yukio Iida, Kennan Ri, Marina Yoshida, Yuuki Koga. Electrical Property of Laser-Sintered Nanopastes with Reduced Metal Nanoparticles Prepared by Laser Ablation in Liquids. Adv Mater. 2014;3(6):75-88. doi: 10.11648/j.am.20140306.13

    Copy | Download

  • @article{10.11648/j.am.20140306.13,
      author = {Taku Saiki and Yukio Iida and Kennan Ri and Marina Yoshida and Yuuki Koga},
      title = {Electrical Property of Laser-Sintered Nanopastes with Reduced Metal Nanoparticles Prepared by Laser Ablation in Liquids},
      journal = {Advances in Materials},
      volume = {3},
      number = {6},
      pages = {75-88},
      doi = {10.11648/j.am.20140306.13},
      url = {https://doi.org/10.11648/j.am.20140306.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20140306.13},
      abstract = {Reduced iron, aluminum, copper, and magnesium nanoparticles were produced from iron oxide (Fe3O4), aluminum oxide (Al2O3), copper oxide (CuO), and magnesium oxide (MgO) powders by using laser ablation in liquids, and nanopastes were synthesized with the reduced iron, aluminum, copper, and magnesium nanoparticles. The nanopastes were sintered by using a continuous-wave fiber laser in air atmosphere. The laser-sintered nanopastes consist of polycrystalline metal. The structures of the laser-sintered metal nanopastes were analyzed by SEM and EDX, and their resistivities were evaluated by four-terminal method. The metal nanopastes sintered by hot plate have 2.5- to 11-times-higher resistivities than those of common metals fabricated in blast furnaces. Moreover, the laser-sintered metal nanopastes have 9.5- to 45-times-higher resistivities than those of common metals fabricated in blast furnaces.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Electrical Property of Laser-Sintered Nanopastes with Reduced Metal Nanoparticles Prepared by Laser Ablation in Liquids
    AU  - Taku Saiki
    AU  - Yukio Iida
    AU  - Kennan Ri
    AU  - Marina Yoshida
    AU  - Yuuki Koga
    Y1  - 2014/12/18
    PY  - 2014
    N1  - https://doi.org/10.11648/j.am.20140306.13
    DO  - 10.11648/j.am.20140306.13
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 75
    EP  - 88
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20140306.13
    AB  - Reduced iron, aluminum, copper, and magnesium nanoparticles were produced from iron oxide (Fe3O4), aluminum oxide (Al2O3), copper oxide (CuO), and magnesium oxide (MgO) powders by using laser ablation in liquids, and nanopastes were synthesized with the reduced iron, aluminum, copper, and magnesium nanoparticles. The nanopastes were sintered by using a continuous-wave fiber laser in air atmosphere. The laser-sintered nanopastes consist of polycrystalline metal. The structures of the laser-sintered metal nanopastes were analyzed by SEM and EDX, and their resistivities were evaluated by four-terminal method. The metal nanopastes sintered by hot plate have 2.5- to 11-times-higher resistivities than those of common metals fabricated in blast furnaces. Moreover, the laser-sintered metal nanopastes have 9.5- to 45-times-higher resistivities than those of common metals fabricated in blast furnaces.
    VL  - 3
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Department of Electrical and Electronic Engineering, Faculty of Engineering Science, Kansai University, 3-3-35 Yamate, Suita, Osaka, Japan

  • Department of Electrical and Electronic Engineering, Faculty of Engineering Science, Kansai University, 3-3-35 Yamate, Suita, Osaka, Japan

  • Department of Electrical and Electronic Engineering, Faculty of Engineering Science, Kansai University, 3-3-35 Yamate, Suita, Osaka, Japan

  • Department of Electrical and Electronic Engineering, Faculty of Engineering Science, Kansai University, 3-3-35 Yamate, Suita, Osaka, Japan

  • Department of Electrical and Electronic Engineering, Faculty of Engineering Science, Kansai University, 3-3-35 Yamate, Suita, Osaka, Japan

  • Sections