| Peer-Reviewed

Corrosion Behaviour of CNT Reinforced AA 7075 Nanocomposites

Published: 20 February 2013
Views:       Downloads:
Abstract

Carbon nanotubes reinforced AA 7075 alloy was fabricated by powder metallurgy route. Multi-walled carbon nanotubes (MWCNTs) were synthesized by electric arc discharge method. Different mass fraction of CNTs was added to the AA 7075 and the powder mixtures were consolidated using uniaxial press. The consolidated samples were sintered at 600˚ C in inert atmosphere followed by hot compaction at 450˚ C. The electrochemical corrosion behaviour of AA 7075 and CNT reinforced AA 7075 was studied using Electrochemical Polarization Technique (ACM Gill) and Electrochemical Impedance Technique. The relative densities of the composites were measured. The phase analysis and surface morphology of the composites were done by XRD and scanning electron microscope (SEM). The corrosion behaviour of the composites and the possible mechanism for the effect of CNT in the properties have been studied in detail in this paper.

Published in Advances in Materials (Volume 2, Issue 1)
DOI 10.11648/j.am.20130201.11
Page(s) 1-5
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

AA 7075, Composite, CNT, Arc Discharge, Sintering, Electrochemical Corrosion, Impedance Spectroscopy, XRD, Raman Spectroscopy, SEM & TEM

References
[1] Ijima, "Helical microtubules of graphitic carbon," Nature, , pp.354–56, 1991.
[2] D.M. Aylor and P.J. Moran, J. Eletrochem. Soc., 132 , pp.1277, 1985.
[3] P.P. Trzaskoma, E. McCafferty and C.R. Crowe, J. Elee-tro-chem. Soc., vol. 130, 1804, 1983.
[4] K. Noda, H. Ono, H. Tsuru, H. Tezuka and A. Kamio, J. Jpn. Inst. Met., vol. 56, 641,1992.
[5] H. Sun, E.Y. Koo and H.G. Wheat, Corrosion, 47, 741, 1991.
[6] M.M. Buarzaigaand S.J. Thorpe, Corrosion, 50, 176, 1994.
[7] P.P. Trzaskoma, Corrosion, 46, 402, 1990.
[8] W.F. Czyrklis, presented at CORROSION/85, paper No.196, 1985.
[9] D.M. Aylor and R.M. Kain, ASTM STP, vol. 864,pp.632, 1983.
[10] L.H. Hihara and R.M. Latanision, Corrosion, vol. 48, 546, 1992.
[11] M.S.SenthilSaravanan, S.P.KumareshBabu, K.Sivaprasad and S.Jagannatham, Intl.J.Engg.Sci.Ttech., vol. 2, pp.100, 2010.
[12] J.Kastner et al., "Resonance Raman and infrared spectroscopy of carbon nanotubes," Chem. Phys. Let., vol. 221, pp. 53–58, 1994.
[13] A.M. Rao et al., "Diameter-selective Raman scattering from vibrational modes in carbon nanotubes," Science, vol. 275, pp. 187–190, 1997.
[14] A. Jorio, "Polarized Raman Study of Single-Wall Semi-con-ducting Carbon Nanotubes," Phys. Rev. Lett., vol. 85, pp. 2617, 2000.
[15] Thomsen, C., "Second-order raman spectra of single and multi-walled carbon nanotubes," Phys. Rev. B, vol. 61, pp. 4542–4544, 2000.
[16] Weifeng Xu, Jinhe Liu, "Microstructure and pitting corrosion of Friction stir welded joints in 2219-O Alumiunum alloy thick plate," Corrosion Science, Elsevier, vol.51, pp. 2743–275, 2009.
Cite This Article
  • APA Style

    B. Thirumaran, S. Natarajan, S. P. Kumaresh. (2013). Corrosion Behaviour of CNT Reinforced AA 7075 Nanocomposites. Advances in Materials, 2(1), 1-5. https://doi.org/10.11648/j.am.20130201.11

    Copy | Download

    ACS Style

    B. Thirumaran; S. Natarajan; S. P. Kumaresh. Corrosion Behaviour of CNT Reinforced AA 7075 Nanocomposites. Adv. Mater. 2013, 2(1), 1-5. doi: 10.11648/j.am.20130201.11

    Copy | Download

    AMA Style

    B. Thirumaran, S. Natarajan, S. P. Kumaresh. Corrosion Behaviour of CNT Reinforced AA 7075 Nanocomposites. Adv Mater. 2013;2(1):1-5. doi: 10.11648/j.am.20130201.11

    Copy | Download

  • @article{10.11648/j.am.20130201.11,
      author = {B. Thirumaran and S. Natarajan and S. P. Kumaresh},
      title = {Corrosion Behaviour of CNT Reinforced AA 7075 Nanocomposites},
      journal = {Advances in Materials},
      volume = {2},
      number = {1},
      pages = {1-5},
      doi = {10.11648/j.am.20130201.11},
      url = {https://doi.org/10.11648/j.am.20130201.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20130201.11},
      abstract = {Carbon nanotubes reinforced AA 7075 alloy was fabricated by powder metallurgy route. Multi-walled carbon nanotubes (MWCNTs) were synthesized by electric arc discharge method. Different mass fraction of CNTs was added to the AA 7075 and the powder mixtures were consolidated using uniaxial press. The consolidated samples were sintered at 600˚ C in inert atmosphere followed by hot compaction at 450˚ C. The electrochemical corrosion behaviour of AA 7075 and CNT reinforced AA 7075 was studied using Electrochemical Polarization Technique (ACM Gill) and Electrochemical Impedance Technique. The relative densities of the composites were measured. The phase analysis and surface morphology of the composites were done by XRD and scanning electron microscope (SEM). The corrosion behaviour of the composites and the possible mechanism for the effect of CNT in the properties have been studied in detail in this paper.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Corrosion Behaviour of CNT Reinforced AA 7075 Nanocomposites
    AU  - B. Thirumaran
    AU  - S. Natarajan
    AU  - S. P. Kumaresh
    Y1  - 2013/02/20
    PY  - 2013
    N1  - https://doi.org/10.11648/j.am.20130201.11
    DO  - 10.11648/j.am.20130201.11
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 1
    EP  - 5
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20130201.11
    AB  - Carbon nanotubes reinforced AA 7075 alloy was fabricated by powder metallurgy route. Multi-walled carbon nanotubes (MWCNTs) were synthesized by electric arc discharge method. Different mass fraction of CNTs was added to the AA 7075 and the powder mixtures were consolidated using uniaxial press. The consolidated samples were sintered at 600˚ C in inert atmosphere followed by hot compaction at 450˚ C. The electrochemical corrosion behaviour of AA 7075 and CNT reinforced AA 7075 was studied using Electrochemical Polarization Technique (ACM Gill) and Electrochemical Impedance Technique. The relative densities of the composites were measured. The phase analysis and surface morphology of the composites were done by XRD and scanning electron microscope (SEM). The corrosion behaviour of the composites and the possible mechanism for the effect of CNT in the properties have been studied in detail in this paper.
    VL  - 2
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli

  • Centre of Excellence in Corrosion and Surface Engineering, National Institute of Technology, Tiruchirappalli

  • Centre of Excellence in Corrosion and Surface Engineering, National Institute of Technology, Tiruchirappalli

  • Sections