American Journal of Electromagnetics and Applications

Submit a Manuscript

Publishing with us to make your research visible to the widest possible audience.

Propose a Special Issue

Building a community of authors and readers to discuss the latest research and develop new ideas.

Optimization of a Magnetic Drive Blender Orthogonal Experiment Method and Experimental Verification

In order to solve the problems of the traditional blenders, such as short service life, easy leakage and high noise, a magnetic driven blender with disc magnetic coupler as the core stirring component was designed. The experimental design was carried out by orthogonal test method. The three-dimensional software Solidworks was used to establish the structural model of the disk magnetic coupler with nine groups of different structural parameters. The finite element software Ansys Maxwell was used to carry out numerical simulation of nine groups of different structural models of the disk magnetic coupler. The range analysis method was used to study the main and insignificant factors that affect the performance of the disc magnetic coupler, and the optimal structure parameters of the disc magnetic coupler were obtained. The results show that the level values with the most significant among all factors were the permanent magnet thickness (A3), the number of magnetic poles (B3), and the air gap spacing (C1), respectively. The optimal geometric parameter structure of the disk magnetic coupler was A3=10mm, B3=12 pairs, and C1=3mm, respectively. The performance of the optimized disk magnetic coupler was improved by 88%. It provides a design reference for the following research on the performance optimization of disc magnetic coupler.

Magnetic Drive Blender, Disk Magnetic Coupler, Orthogonal Test Analysis, Finite Element Analysis

APA Style

Jianlong Gong. (2022). Optimization of a Magnetic Drive Blender Orthogonal Experiment Method and Experimental Verification. American Journal of Electromagnetics and Applications, 10(1), 9-15. https://doi.org/10.11648/j.ajea.20221001.12

ACS Style

Jianlong Gong. Optimization of a Magnetic Drive Blender Orthogonal Experiment Method and Experimental Verification. Am. J. Electromagn. Appl. 2022, 10(1), 9-15. doi: 10.11648/j.ajea.20221001.12

AMA Style

Jianlong Gong. Optimization of a Magnetic Drive Blender Orthogonal Experiment Method and Experimental Verification. Am J Electromagn Appl. 2022;10(1):9-15. doi: 10.11648/j.ajea.20221001.12

Copyright © 2022 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

1. Yang ZiHao. (2020). Numerical Simulation and Noise Calculation of Two-phase Flow in Ultra-High Speed Flow Field of High-speed Blender [D]. School of Mechanical and Electrical Engineering, 1-92.
2. Qiao WeiJun. (2020). Design and Implementation of Fault Automatic Diagnosis and Protection System for Blend Machine [D]. School of Mechanical and Electrical Engineering, 1-62.
3. Liu Kai. (2020). Research on Testing Method of Transmission Characteristics of Magnetic Pump [D]. ZHEJIANG UNIVERISTY, 1-62.
4. Sun JingRu. (2018). Numerical simulation and experimental research of transmission characteristics of magnetic [D], JIANGSU UNIVERSITY, 1-95.
5. Du Xing. (2011). The Analysis on the Mechanical and Magnetic Performance of the High Speed Axial Magnetic Driver and the Design of the Experimental Device [D], Wuhan Textile University, 1-73.
6. Mo L, Zhu X, Zhang T, et al. (2018). Temperature Rise Calculation of a Flux-Switching Permanent-Magnet Double-Rotor Machine Using Electromagnetic-Thermal Coupling Analysis [J]. IEEE Transactions on Magnetics, vol. 3, 1-4.
7. Pan, P. Y.; Wang, D. Z.; Niu, B. W. (2021). Design optimization of APMEC using chaos multi-objective particle swarm optimization algorithm. Energy Reports, vol. 7, 531-537.
8. Tarvirdilu-Asl,; Rasul,; Yuksel, Murat,; Keysan, Ozan. (2019). Multi-objective design optimization of a permanent magnet axial flux eddy current brake. Turkish Journal of Electrical Engineering and Computer Sciences, vol. 27, 998-1011.
9. El-Wakeel, Amged, S. (2014). Design optimization of PM couplings using hybrid Particle Swarm Optimization-Simplex Method (PSO-SM) Algorithm. Electr Power Syst Res, vol. 116, 29–35.
10. Wang, S.; Hu, K.; Li, DY. (2019). Optimal design method for the structural parameters of hybrid magnetic coupler. Journal of Mechanical Science and Technology, vol. 33, 173-182.
11. Sun Feng, Ma Di, Zhao Chuan, et al. (2020). Simulation Analysis of Magnetic Characteristic of Double Permanent Magnet Wheel Linear Drive Device [J], Jixie Chuandong, vol. 3, 103-109.
12. YU Jiao, Shao Wan Zhen, Shi Feng, et al. (2019). Simulation Research of Disc Magnetic Coupling Based on Ansoft Maxwell [J], HYDRAULICS PNEUMATICS &SEALS, vol. 2, 32-35.
13. Zhao Han, Yang Zhitie, Tian Jie. (2001). Research on Calculation Method of Transmission Torque of Permanent Magnet Gear [J], Chinese Journal of Mechanical Engineering, vol. 37, 66-70.
14. Hua ChuXia, Wang KangJia. (2021). OPTIMIZATION OF A 3-D HIGH-POWER LED LAMP Orthogonal Experiment Method and Experimental Verification [J], THERMAL SCIENCE, vol. 25, 1495-1500.
15. Gong Jianlong, Zhao Yixiang, Chen Xin, et al. (2014). Multi-output Optimization on Hydrostatic Guideway Platform Based on Orthogonal Design and Comprehensive Evaluation [J], Machine Tool & Hydraulics, vol. 13, 23-26.