The most recent battery manufacturers are the high electronic waste and after unworkable. And that battery considerations waste products that considerations for E-waste and causes of globalization, pollutant nature and created many diseases. That consider to identified the nickel batteries. That battery is high saving energy and durability of lives spans. It rechargeable fluid (Molten Salt). It is highly workable to Direct and alternative current it any damaged extra structures some corroded in nature dismantled to re-manufacturing and controlled of E-wastes. It highly controlled electronics waste and globalization effects. That paper present to the experimentally to build the two types of nickel battery (3.5 volts and 200v). Check the work duration, withstanding capacity in rechargeable over the lifetime duration reviews. Finally estimating quantity analysis report for 3.5 volt single and 200v inverter batteries.
| Published in | Science Research (Volume 7, Issue 5) |
| DOI | 10.11648/j.sr.20190705.12 |
| Page(s) | 64-67 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2019. Published by Science Publishing Group |
Nickel Metal Plates, Molten Salt, Sealant Box, Insulation Coat, Voltage Duration, Estimating Values
| [1] | Sada, K., Senthilkumar, B., & Barpanda, P. (2018). Layered Na2Mn3O7 as a 3.1 V Insertion Material for Li-Ion Batteries. ACS Applied Energy Materials, 1.(12), 6719-6724. |
| [2] | Begg, K., van der Woerd, F., & Levy, D. (2018). Best corporate responses to climate change: opportunities for converging climate and biodiversity protecting solutions. In The Business of Climate Change (pp. 61-74). Routledge. |
| [3] | Hernandez-Castro, J., & Avoine, G. (2016, April). Cryptanalysis of ubiquitous computing systems. In 2016 18th Mediterranean Electrotechnical Conference (MELECON) (pp. 1-4). IEEE. |
| [4] | Singh, G., Lakhi, K. S., Ramadass, K., Indirathankam, S. C., & Vinu, A. (2019). High Performance Biomass derived Activated Porous Biocarbons for Combined Pre-and Post-Combustion CO2 Capture. ACS Sustainable Chemistry & Engineering. |
| [5] | Ryu, S., Lee, S., Jung, J., Lee, J., & Kim, Y. (2019). Micromechanics-based homogenization of the effective physical properties of composites with an anisotropic matrix and interfacial imperfections. Frontiers in Materials, 6. |
| [6] | Wang, B., Ryu, J., Choi, S., Zhang, X., Pribat, D., Li, X., ... & Ruoff, R. S. (2019). Ultrafast-Charging Silicon-Based Coral-Like Network Anodes for Lithium-Ion Batteries with High Energy and Power Densities. ACS nano. |
| [7] | Hanna, R., Gross, R., Speirs, J., Heptonstall, P., & Gambhir, A. (2015). Innovation timelines from invention to maturity. UK Energy Research Centre. |
| [8] | Zhang, C., Qiao, Y., Xiong, P., Ma, W., Bai, P., Wang, X., ... & Zeng, J. H. (2019). Conjugated Microporous Polymers with Tunable Electronic Structure for High Performance Potassium-Ion Batteries. ACS nano. |
| [9] | Lodovico, H. L. The role of the electrolyte on the lithium-sulfur battery electrochemistry. |
| [10] | Awasthi, A. K., Wang, M., Wang, Z., Awasthi, M. K., & Li, J. (2018). E-waste management in India: A mini-review. Waste Management & Research, 36 (5), 408-414. |
| [11] | Hagos, T. T., Thirumalraj, B., Huang, C. J., Abrha, L. H., Hagos, T. M., Berhe, G. B., ... & Hwang, B. J. (2019). Locally Concentrated LiPF6 in Carbonate-based Electrolyte with Fluoroethylene Carbonate as a Diluent for Anode-Free Lithium Metal Battery. ACS applied materials & interfaces. |
| [12] | Königsberger, E. (2019). Guidelines for the measurement of Solid–Liquid solubility data at atmospheric pressure. |
| [13] | Wu, M. S., Sie, Y. J., & Yang, S. B. (2019). Hollow mesoporous nickel dendrites grown on porous nickel foam for electrochemical oxidation of urea. Electrochimica Acta, 304, 131-137. |
| [14] | Kelder, E. M. (2019). Materials for Electrochemical Energy Storage Devices. Critical Materials: Underlying Causes And Sustainable Mitigation Strategies, 5, 53. |
| [15] | Heim, K., & Basketter, D. (2018). Metal Exposure Regulations and Their Effect on Allergy Prevention. In Metal Allergy (pp. 39-54). Springer, Cham. |
| [16] | Cardarelli, F. (2018). Ferrous metals and their alloys. In Materials Handbook (pp. 101-248). Springer, Cham. |
| [17] | Amendola, S., & Sharp-Goldman, S. (2019). U.S. Patent Application No. 16/154,075. |
| [18] | Iqbal, M. Z., Rehman, A. U., & Siddique, S. (2019). Recent developments in graphene based novel structures for efficient and durable fuel cells. Journal of Energy Chemistry. |
APA Style
Vijayvenkatesh Chandrasekaran. (2019). Tentative Study of Eco-Friendly Nickel Metal Battery. Science Research, 7(5), 64-67. https://doi.org/10.11648/j.sr.20190705.12
ACS Style
Vijayvenkatesh Chandrasekaran. Tentative Study of Eco-Friendly Nickel Metal Battery. Sci. Res. 2019, 7(5), 64-67. doi: 10.11648/j.sr.20190705.12
AMA Style
Vijayvenkatesh Chandrasekaran. Tentative Study of Eco-Friendly Nickel Metal Battery. Sci Res. 2019;7(5):64-67. doi: 10.11648/j.sr.20190705.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.sr.20190705.12,
author = {Vijayvenkatesh Chandrasekaran},
title = {Tentative Study of Eco-Friendly Nickel Metal Battery},
journal = {Science Research},
volume = {7},
number = {5},
pages = {64-67},
doi = {10.11648/j.sr.20190705.12},
url = {https://doi.org/10.11648/j.sr.20190705.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sr.20190705.12},
abstract = {The most recent battery manufacturers are the high electronic waste and after unworkable. And that battery considerations waste products that considerations for E-waste and causes of globalization, pollutant nature and created many diseases. That consider to identified the nickel batteries. That battery is high saving energy and durability of lives spans. It rechargeable fluid (Molten Salt). It is highly workable to Direct and alternative current it any damaged extra structures some corroded in nature dismantled to re-manufacturing and controlled of E-wastes. It highly controlled electronics waste and globalization effects. That paper present to the experimentally to build the two types of nickel battery (3.5 volts and 200v). Check the work duration, withstanding capacity in rechargeable over the lifetime duration reviews. Finally estimating quantity analysis report for 3.5 volt single and 200v inverter batteries.},
year = {2019}
}
TY - JOUR T1 - Tentative Study of Eco-Friendly Nickel Metal Battery AU - Vijayvenkatesh Chandrasekaran Y1 - 2019/10/20 PY - 2019 N1 - https://doi.org/10.11648/j.sr.20190705.12 DO - 10.11648/j.sr.20190705.12 T2 - Science Research JF - Science Research JO - Science Research SP - 64 EP - 67 PB - Science Publishing Group SN - 2329-0927 UR - https://doi.org/10.11648/j.sr.20190705.12 AB - The most recent battery manufacturers are the high electronic waste and after unworkable. And that battery considerations waste products that considerations for E-waste and causes of globalization, pollutant nature and created many diseases. That consider to identified the nickel batteries. That battery is high saving energy and durability of lives spans. It rechargeable fluid (Molten Salt). It is highly workable to Direct and alternative current it any damaged extra structures some corroded in nature dismantled to re-manufacturing and controlled of E-wastes. It highly controlled electronics waste and globalization effects. That paper present to the experimentally to build the two types of nickel battery (3.5 volts and 200v). Check the work duration, withstanding capacity in rechargeable over the lifetime duration reviews. Finally estimating quantity analysis report for 3.5 volt single and 200v inverter batteries. VL - 7 IS - 5 ER -
Information
Email: