| Peer-Reviewed

Research on Processing Technology of Laser Punching and Positioning on Stainless Steel Plate

Received: 25 March 2022     Accepted: 19 April 2022     Published: 26 April 2022
Views:       Downloads:
Abstract

The process of sample punching on the stainless steel plate can calibrate the position and effectively improve the development of accurate positioning in the subsequent process. The processing technology of laser punching not only satisfies the efficient work of laser equipment, but also realizes the function of sample punching positioning, which is of great help to sheet metal processing. The laser punching process is affected by many process parameters which will result in slag inclusions in the punching socket after laser punching, in turn preventing the normal development of the subsequent process. In order to solve this problem, this paper sets out to study the influence of different process parameter combinations on the laser punching alignment quality by the orthogonal test method to formulate a scientific test plan for the process parameters involved, and the machining test of the punching alignment on the stainless steel plate with laser. The results show that the laser punching quality is affected by the marking time, laser power, auxiliary gas and air pressure under the condition that the distance from the nozzle remains unchanged, and the marking time has the greatest impact. In the meantime, this paper proposes the optimized combination of process parameters. The above results have instructive significance to the laser punching alignment process.

Published in Science Discovery (Volume 10, Issue 2)
DOI 10.11648/j.sd.20221002.19
Page(s) 72-75
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Punching, Sample Punching, Laser, Processing Technology

References
[1] 尹桂敏,李占国,史尧臣.YAG激光切割不锈钢薄板的工艺参数研究[J].机床与液压, 2013, 41 (23): 53-56。
[2] 昊问才,邓帆等.提高三维激光切割平顺性的切割头空间位姿优化方法[J].中国激光, 2013, 40 (1): 0103005。
[3] 田新国,王斌修.激光打标机的使用及常见问题的解决方案[J].电加工与模具, 2011, 18 (3): 57-60。
[4] SCHUOECKER D. Dynamic phenomena in laser cutting and cut quality [J]. Applied physics B, Photophysics and Laser Chemistry, 1986, 40 (1): 9-14.
[5] 张维哲.304不锈钢薄板激光焊接技术研究[D].大连:大连理工大学, 2009: 13-14。
[6] POPRAWE R, KONIG W. Modeling, monitoring and control in high quality laser cutting [C] // 51st CIRP Annals-Manufacturing Technology, France, Nancy. 2001; 137-140.
[7] 孟庆轩,王旭跃.薄板激光切割气熔比数学建模及试验验证[J].机械工程学报, 2011, 47 (17): 172-178。
[8] 伍珊红,齐军.Nd:YAG激光打标工艺试验研究[J].激光与红外, 1999, 29 (2): 92-95。
[9] 张明军.万瓦级光纤激光深熔焊接厚板金属蒸汽行为与缺陷控制[D].长沙:湖南大学,2013:53-54。
[10] 李建强.304不锈钢激光焊接的建模与仿真[D].天津:天津大学, 2004: 9-10。
[11] 鄢锉,李力钧.激光切割板材表面质量研究综述[J].激光技术, 2005, 29 (3): 270-274。
[12] 冯文杰,秦丰栋.激光切割不锈钢板工艺参数研究[J].机械设计与制造, 2011, 49 (11): 191-192。
[13] 杨虎,刘琼荪.数理统计[M].北京:高等教育出版社, 2004: 168-169。
[14] 冯巧波,赵旺初,等.工艺参数对不锈钢薄板激光切割质量的影响[J].机械设计与研究, 2017, 33 (6): 118-121。
[15] 余世航,陈岱民.YAG激光焊接不锈钢薄板焊接工艺参数优化[J].长春大学学报, 2013, 23 (2): 134-137。
Cite This Article
  • APA Style

    Pengfei Jiang, Yuanyuan Wu, Junyong Tang. (2022). Research on Processing Technology of Laser Punching and Positioning on Stainless Steel Plate. Science Discovery, 10(2), 72-75. https://doi.org/10.11648/j.sd.20221002.19

    Copy | Download

    ACS Style

    Pengfei Jiang; Yuanyuan Wu; Junyong Tang. Research on Processing Technology of Laser Punching and Positioning on Stainless Steel Plate. Sci. Discov. 2022, 10(2), 72-75. doi: 10.11648/j.sd.20221002.19

    Copy | Download

    AMA Style

    Pengfei Jiang, Yuanyuan Wu, Junyong Tang. Research on Processing Technology of Laser Punching and Positioning on Stainless Steel Plate. Sci Discov. 2022;10(2):72-75. doi: 10.11648/j.sd.20221002.19

    Copy | Download

  • @article{10.11648/j.sd.20221002.19,
      author = {Pengfei Jiang and Yuanyuan Wu and Junyong Tang},
      title = {Research on Processing Technology of Laser Punching and Positioning on Stainless Steel Plate},
      journal = {Science Discovery},
      volume = {10},
      number = {2},
      pages = {72-75},
      doi = {10.11648/j.sd.20221002.19},
      url = {https://doi.org/10.11648/j.sd.20221002.19},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20221002.19},
      abstract = {The process of sample punching on the stainless steel plate can calibrate the position and effectively improve the development of accurate positioning in the subsequent process. The processing technology of laser punching not only satisfies the efficient work of laser equipment, but also realizes the function of sample punching positioning, which is of great help to sheet metal processing. The laser punching process is affected by many process parameters which will result in slag inclusions in the punching socket after laser punching, in turn preventing the normal development of the subsequent process. In order to solve this problem, this paper sets out to study the influence of different process parameter combinations on the laser punching alignment quality by the orthogonal test method to formulate a scientific test plan for the process parameters involved, and the machining test of the punching alignment on the stainless steel plate with laser. The results show that the laser punching quality is affected by the marking time, laser power, auxiliary gas and air pressure under the condition that the distance from the nozzle remains unchanged, and the marking time has the greatest impact. In the meantime, this paper proposes the optimized combination of process parameters. The above results have instructive significance to the laser punching alignment process.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Research on Processing Technology of Laser Punching and Positioning on Stainless Steel Plate
    AU  - Pengfei Jiang
    AU  - Yuanyuan Wu
    AU  - Junyong Tang
    Y1  - 2022/04/26
    PY  - 2022
    N1  - https://doi.org/10.11648/j.sd.20221002.19
    DO  - 10.11648/j.sd.20221002.19
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 72
    EP  - 75
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20221002.19
    AB  - The process of sample punching on the stainless steel plate can calibrate the position and effectively improve the development of accurate positioning in the subsequent process. The processing technology of laser punching not only satisfies the efficient work of laser equipment, but also realizes the function of sample punching positioning, which is of great help to sheet metal processing. The laser punching process is affected by many process parameters which will result in slag inclusions in the punching socket after laser punching, in turn preventing the normal development of the subsequent process. In order to solve this problem, this paper sets out to study the influence of different process parameter combinations on the laser punching alignment quality by the orthogonal test method to formulate a scientific test plan for the process parameters involved, and the machining test of the punching alignment on the stainless steel plate with laser. The results show that the laser punching quality is affected by the marking time, laser power, auxiliary gas and air pressure under the condition that the distance from the nozzle remains unchanged, and the marking time has the greatest impact. In the meantime, this paper proposes the optimized combination of process parameters. The above results have instructive significance to the laser punching alignment process.
    VL  - 10
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Zhongtian Broadband Technology CO., LTD. Nantong, China

  • Zhongtian Broadband Technology CO., LTD. Nantong, China

  • Zhongtian Broadband Technology CO., LTD. Nantong, China

  • Sections