Research Article | | Peer-Reviewed

Research & Application of the Cracking Resistance Test Method of Base-Coat & Render

Received: 13 September 2023     Accepted: 4 October 2023     Published: 28 October 2023
Views:       Downloads:
Abstract

The cracking resistance of base-coat & render are important for ETICS. The current cracking resistance test method can not correctly characterize the cracking resistance of base-coat & render. The suitability of the self-developed test method for cracking resistance and the existing methods was studied and compared. The results show: the value of the ultra flexural-displacement by the new test method is more suitable for representing the cracking resistance performance than the impact resistance, the ratio of compressive/flexural strength, the tensile strength, the transverse deformation. The new test method developed by ourselves can directly compared the correlation between mesh specimens and non-mesh specimens, accurately test the effect of fiberglass mesh in the render. The value of the ultra flexural-displacement of base-coat is nearly linear positive correlation with the amount of the VAE emulsion powder in the base-coat. The fiberglass mesh is important for the render cracking resistance. The position of the mesh in the render can significantly influence the render cracking resistance. As the sample with mesh in fixed position, whether cracking is mainly depend on the base-coat, whereas whether breaking is mainly depend on the mesh. The research results have provided a direct basis for the establishment of relevant standards; should be helpful to solve the industry problem that the surface of ETICS engineering is easy to crack.

Published in International Journal of Materials Science and Applications (Volume 12, Issue 5)
DOI 10.11648/j.ijmsa.20231205.13
Page(s) 75-82
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Cracking Resistance, Test Method, Base-Coat, Render, Research, Application

References
[1] DB11/T 584-2013. Technical Specification for External thermal insulation composite systems based on insulation board residential buildings [S]. 2013. (in Chinese)
[2] ZHANG Yin-xiang. Monitoring and Analysis on Working Conditions of Outer-wall External Thermal Insulation System [J]. Building Science. 2010 (6): 25-27. (in Chinese)
[3] ZHANG Yin-xiang, Gao Wei-jun, Tian Sheng-li. Research on outer-wall external thermal insulation system of rock-wool belt for ultra-low energy high-rise buildings [C]. Development Report of Ultra-low Energy Buildings in Beijing, Tianjin and Hebei (2017). Beijing: China Building Materials Industry Press. 2017: 219-225. (in Chinese)
[4] SUN Xiao-qiang. Experimental Analysis of Hot Rain and Hot and Cold Circulation of two Exterior Insulation Systems [J]. Building Energy Efficiency. 2019 (5): 72-75. (in Chinese)
[5] ZHANG Yin-xiang. Weather Resistance Test Method of the Thermal-insulation System for Out-wall [J]. Building Energy Efficiency. 2010 (4): 13-15. (in Chinese)
[6] WANG Yao. Study on weather resistance of external insulation system of mortar and modified polystyrene board [J]. Fly Ash Comprehensive Utilization. 2019 (3): 27-32. (in Chinese)
[7] GB/T 29906-2013. External thermal insulation composite systems based on expanded polystyrene [S]. Beijing: China Standard Press. 2014. (in Chinese)
[8] GB/T 30595-2014. External thermal insulation composite systems based on extruded polystyrene [S]. Beijing: China Standard Press. 2014. (in Chinese)
[9] JG/T 420-2013. External thermal insulation composite systems based on rigid polyurethanes foam [S]. Beijing: China Standard Press. 2014. (in Chinese)
[10] JG/T 483-2015. External thermal insulation composite systems based on rock wool [S]. Beijing: China Standard Press. 2016. (in Chinese)
[11] WANG Peiming, LIU Engui. Study on Properties of Styrene-Acrylate Copolymer Powder Modified Cement Mortar [J]. Journal of Building Materials. 2009 (3).. (in Chinese)
[12] ZHANG Zhi-jun, CAO Lu-chun. Design Optimization of Base Coat Mortar [J]. Journal of Building Materials. 2008 (5). (in Chinese)
[13] JIAO Chujie, LAI Xuequan, HU Zhiyong, WANG Long. Experimental study on anti-cracking performance of polymer-modified mortar [J]. Concrete. 2015 (3). (in Chinese)
[14] LI Yamei, PENG Jiahui, XU Chuntao. Influence of polypropylene fiber on performance of anti-crack mortar for exterior thermal insulation system [J]. New Building Materials. 2008 (3). (in Chinese)
[15] WANG Zhaojia, WU Jinming, CAI Luhong. Study on Special Crack-resistance Mortar Properties of Internal-large-formwork Exterior Insulation System [J]. Building Energy Efficiency. 2007 (8). (in Chinese)
[16] CUI Jiu-chun, LIU Qiaoling, ZHANG Xu. Study on crack resistance of toughness dry-mixed mortar used on for exterior insulation system [J]. Shanxi Architecture. 2010 (6): 143-145. (in Chinese)
[17] MO Yongheng. Study on the ratio of compressive strength to flexural strength on rendering mortar in external wall insulation System [J]. Jiangxi Building Materials. 2009 (02): 18-19. (in Chinese)
[18] LI Bing, ZHANG Bilu. The flexibility of rendering mortar and the cracking of outer-wall external insulation system [J]. Wall Material Innovation and Building Energy Conservation. 2002 (05): 45-47. (in Chinese)
[19] ETAG 004-2013. Guideline for European Technical Approval of External Thermal Insulation Composite Systems (ETICS) with Rendering [S]. EOTA. Kunstlaan 40 Avenue des Arts. B - 1040 BRUSSELS.
[20] HADI H, VAHAB S, ALIREZA B S, MOHAMMAD F M. On the direct experimental measurement of mortar fracture toughness by a compression-to-tensile load transformer (CTLT) [J]. Construction and Building Materials. 2018 (8): 687-712.
[21] WANG R, WANG P M, YAO L J. Effect of redispersible vinyl acetate and versatate copolymer powder on flexibility of cement mortar [J]. Construction and Building Materials. 2012 (2): 259-262.
[22] Wang Ru, Wang Pei-ming. Transverse Deformation and Ratio of Compressive Strength to Flexural Strength of SAE Latex-Modified Mortar and Their Relationship [J]. Journal of Building Materials. 2008 (4). (in Chinese)
[23] Wang Ru, Wang Pei-ming, Peng Yu. Comparison of Three Characterization Methods for Flexibility of SBR Latex-Modified Cement Mortar [J]. Journal of Building Materials. 2010 (3). (in Chinese)
[24] JC/T 547-2017. Adhesives for ceramic tiles [S]. Beijing: China Building Materials Industry Press. 2017. (in Chinese)
[25] JC/T 2559-2020. Adhesive and rendering mortar for rock wool in external thermal insulation composite systems [S]. Beijing: China Building Materials Industry Press. 2020. (in Chinese)
Cite This Article
  • APA Style

    Yinxiang, Z., Zhaojia, W., Xiangjuan, C., Tianyong, H. (2023). Research & Application of the Cracking Resistance Test Method of Base-Coat & Render. International Journal of Materials Science and Applications, 12(5), 75-82. https://doi.org/10.11648/j.ijmsa.20231205.13

    Copy | Download

    ACS Style

    Yinxiang, Z.; Zhaojia, W.; Xiangjuan, C.; Tianyong, H. Research & Application of the Cracking Resistance Test Method of Base-Coat & Render. Int. J. Mater. Sci. Appl. 2023, 12(5), 75-82. doi: 10.11648/j.ijmsa.20231205.13

    Copy | Download

    AMA Style

    Yinxiang Z, Zhaojia W, Xiangjuan C, Tianyong H. Research & Application of the Cracking Resistance Test Method of Base-Coat & Render. Int J Mater Sci Appl. 2023;12(5):75-82. doi: 10.11648/j.ijmsa.20231205.13

    Copy | Download

  • @article{10.11648/j.ijmsa.20231205.13,
      author = {Zhang Yinxiang and Wang Zhaojia and Chen Xiangjuan and Huang Tianyong},
      title = {Research & Application of the Cracking Resistance Test Method of Base-Coat & Render},
      journal = {International Journal of Materials Science and Applications},
      volume = {12},
      number = {5},
      pages = {75-82},
      doi = {10.11648/j.ijmsa.20231205.13},
      url = {https://doi.org/10.11648/j.ijmsa.20231205.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20231205.13},
      abstract = {The cracking resistance of base-coat & render are important for ETICS. The current cracking resistance test method can not correctly characterize the cracking resistance of base-coat & render. The suitability of the self-developed test method for cracking resistance and the existing methods was studied and compared. The results show: the value of the ultra flexural-displacement by the new test method is more suitable for representing the cracking resistance performance than the impact resistance, the ratio of compressive/flexural strength, the tensile strength, the transverse deformation. The new test method developed by ourselves can directly compared the correlation between mesh specimens and non-mesh specimens, accurately test the effect of fiberglass mesh in the render. The value of the ultra flexural-displacement of base-coat is nearly linear positive correlation with the amount of the VAE emulsion powder in the base-coat. The fiberglass mesh is important for the render cracking resistance. The position of the mesh in the render can significantly influence the render cracking resistance. As the sample with mesh in fixed position, whether cracking is mainly depend on the base-coat, whereas whether breaking is mainly depend on the mesh. The research results have provided a direct basis for the establishment of relevant standards; should be helpful to solve the industry problem that the surface of ETICS engineering is easy to crack.},
     year = {2023}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Research & Application of the Cracking Resistance Test Method of Base-Coat & Render
    AU  - Zhang Yinxiang
    AU  - Wang Zhaojia
    AU  - Chen Xiangjuan
    AU  - Huang Tianyong
    Y1  - 2023/10/28
    PY  - 2023
    N1  - https://doi.org/10.11648/j.ijmsa.20231205.13
    DO  - 10.11648/j.ijmsa.20231205.13
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 75
    EP  - 82
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20231205.13
    AB  - The cracking resistance of base-coat & render are important for ETICS. The current cracking resistance test method can not correctly characterize the cracking resistance of base-coat & render. The suitability of the self-developed test method for cracking resistance and the existing methods was studied and compared. The results show: the value of the ultra flexural-displacement by the new test method is more suitable for representing the cracking resistance performance than the impact resistance, the ratio of compressive/flexural strength, the tensile strength, the transverse deformation. The new test method developed by ourselves can directly compared the correlation between mesh specimens and non-mesh specimens, accurately test the effect of fiberglass mesh in the render. The value of the ultra flexural-displacement of base-coat is nearly linear positive correlation with the amount of the VAE emulsion powder in the base-coat. The fiberglass mesh is important for the render cracking resistance. The position of the mesh in the render can significantly influence the render cracking resistance. As the sample with mesh in fixed position, whether cracking is mainly depend on the base-coat, whereas whether breaking is mainly depend on the mesh. The research results have provided a direct basis for the establishment of relevant standards; should be helpful to solve the industry problem that the surface of ETICS engineering is easy to crack.
    VL  - 12
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Beijing Building Materials Academy Co. Ltd, Beijing, China; Beijing Engineering Research Center of Pre-Mixed Mortar, Beijing, China; State Key Laboratory of Solid Waste Reuse for Buiding Materials, Beijing, China

  • Beijing Building Materials Academy Co. Ltd, Beijing, China; Beijing Engineering Research Center of Pre-Mixed Mortar, Beijing, China; State Key Laboratory of Solid Waste Reuse for Buiding Materials, Beijing, China

  • Beijing BBMG-M Co. Ltd, Beijing, China; Beijing Engineering Research Center of Pre-Mixed Mortar, Beijing, China; State Key Laboratory of Solid Waste Reuse for Buiding Materials, Beijing, China

  • Beijing Building Materials Academy Co. Ltd, Beijing, China; Beijing Engineering Research Center of Pre-Mixed Mortar, Beijing, China; State Key Laboratory of Solid Waste Reuse for Buiding Materials, Beijing, China

  • Sections