| Peer-Reviewed

Hybrid Framework of, EWGM-FMEA, Analytical Hierarchy Process and Risk Balance Score Card for Risks Assessment in Energy Sector

Received: 30 October 2018     Accepted: 21 November 2018     Published: 17 December 2018
Views:       Downloads:
Abstract

Power plants are very important for continuous electricity energy supply and have been affected by many disruptions. Furthermore, the power grid is a critical item for both economy and society. Accordingly, the aim of this paper is to adopt a risk assessment tool combining an improved Failure Mode and Effect Analysis (FMEA), Analytical Hierarchy Process (AHP) and enhanced Risk Balance Score Card (RBSC) to model nine risk categories in the energy sector. The outputs of the improved FMEA methodology will be utilised as the inputs for the BSC-AHP framework. The improved FMEA methodology combines the exponential and weighted geometric mean to overcome some drawbacks of the conventional FMEA. The approach helps the top management in prioritising 84 risk indicators particularly, in power plants. The results of this model elucidate that the highest priority (most risky perspective) is for the supply chain perspective with 24.2% of the influence, followed by the internal and operational business process perspective with 18.4%. In this perspective, the technical risk is the key risk with 10.4% followed by the disruption risk with 9.4% while the lowest priority risk in this perspective is the project neglect risk with 2.5%. The sustainability perspective coming as the third priority perspective with 17.7%, where the environmental and safety health category covers about 41.7%, followed by the technological pillar with 35.5% and the social pillar with 22.8%. At the fourth level, the customer/demand perspective is coming with 14%, where the load forecasting risk has the highest priority in this perspective with 49%. The learning and growth perspective stay at the fifth level with 13% where the human resources risks category has more influence than the management risks category. The lowest risk perspective priority is the economic perspective with 12.7%. These results will help the top management in taking a holistic view of various non-technical risks at the strategic level and the priority for each one then, the suitable decision can be taken. The significance of this research is in presenting a novel improved for the traditional FMEA and combining it with the BSC-AHP methods to improve the risk assessment process of 84 risks of six perspectives of BSC in power plants at the strategic level.

Published in International Journal of Engineering Management (Volume 2, Issue 3)
DOI 10.11648/j.ijem.20180203.12
Page(s) 58-66
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Exponential Weighed Geometric Mean (EWGM), FMEA, RPN, AHP and BSC

References
[1] K. O. Achebe, “Risk Based Models for the Optimization of Oil and Gas Supply Chain Critical Infrastructure,” 2011.
[2] N. H. Afgan, M. G. Carvalho, and N. V. Hovanov, “Energy system assessment with sustainability indicators,” Energy Policy, vol. 28, no. 9, pp. 603–612, 2000.
[3] J. Gonzalez, “Modelling and Controlling Risk in Energy Systems,” University of Manchester, 2015.
[4] S. T. Chan, “IDENTIFYING RISK FACTORS IN THE GENERATING SECTION OF THE POWER PLANTS By,” no. May, 2009.
[5] M. Garbuzova-schlifter and R. Madlener, “AHP-based risk analysis of energy performance contracting projects in Russia,” Energy Policy, vol. 97, pp. 559–581, 2016.
[6] Y. Geng, J. Fu, J. Sarkis, and B. Xue, “Towards a national circular economy indicator system in China: An evaluation and critical analysis,” J. Clean. Prod., vol. 23, no. 1, pp. 216–224, 2012.
[7] D. D. Wu and D. L. Olson, “Introduction to the special section on ‘optimizing risk management: Methods and tools,’” Hum. Ecol. Risk Assess., vol. 15, no. 2, pp. 220–226, 2009.
[8] X. Liu and T. Arthanari, “A system dynamics model for managing corruption risks in dairy supply chains,” 34th Int. Conf. Syst. Dyn. Soc., pp. 1–17, 2016.
[9] WEF, “Building Resilience in Supply Chain,” Geneva, 2013.
[10] P. Burgherr, P. Eckle, and S. Hirschberg, “Comparative assessment of severe accident risks in the coal, oil and natural gas chains,” Reliab. Eng. Syst. Saf., vol. 105, pp. 97–103, 2012.
[11] A. Samvedi, V. Jain, and F. T. S. Chan, “Quantifying risks in a supply chain through integration of fuzzy AHP and fuzzy TOPSIS,” Int. J. Prod. Res., vol. 51, no. 8, pp. 2433–2442, 2013.
[12] B. R. S. Kaplan, “Risk Management and the Strategy Execution System,” 2009.
[13] G. Radivojević and V. Gajović, “Supply chain risk modeling by AHP and Fuzzy AHP methods,” J. Risk Res., vol. 17, no. 3, pp. 337–352, 2014.
[14] M. S. Beasley, B. C. Branson, B. V Hancock, and C. Landes, “Developing key risk indicators to strengthen enterprise risk management,” 2010.
[15] M. A. Brown, D. D. Arcy, L. Melissa, Sharma Isha, and Li Yufei, Solid Waste from the Operation and Decommissioning of Power Plants. 2017.
[16] T. L. Saaty, “Decision making with the analytic hierarchy process,” Int. J. Serv. Sci., vol. 1, no. 1, p. 83, 2008.
Cite This Article
  • APA Style

    Sahar Mohammad Al Mashaqbeh, Jose Eduardo Munive Hernandez, Mohammad Khurshid Khan. (2018). Hybrid Framework of, EWGM-FMEA, Analytical Hierarchy Process and Risk Balance Score Card for Risks Assessment in Energy Sector. International Journal of Engineering Management, 2(3), 58-66. https://doi.org/10.11648/j.ijem.20180203.12

    Copy | Download

    ACS Style

    Sahar Mohammad Al Mashaqbeh; Jose Eduardo Munive Hernandez; Mohammad Khurshid Khan. Hybrid Framework of, EWGM-FMEA, Analytical Hierarchy Process and Risk Balance Score Card for Risks Assessment in Energy Sector. Int. J. Eng. Manag. 2018, 2(3), 58-66. doi: 10.11648/j.ijem.20180203.12

    Copy | Download

    AMA Style

    Sahar Mohammad Al Mashaqbeh, Jose Eduardo Munive Hernandez, Mohammad Khurshid Khan. Hybrid Framework of, EWGM-FMEA, Analytical Hierarchy Process and Risk Balance Score Card for Risks Assessment in Energy Sector. Int J Eng Manag. 2018;2(3):58-66. doi: 10.11648/j.ijem.20180203.12

    Copy | Download

  • @article{10.11648/j.ijem.20180203.12,
      author = {Sahar Mohammad Al Mashaqbeh and Jose Eduardo Munive Hernandez and Mohammad Khurshid Khan},
      title = {Hybrid Framework of, EWGM-FMEA, Analytical Hierarchy Process and Risk Balance Score Card for Risks Assessment in Energy Sector},
      journal = {International Journal of Engineering Management},
      volume = {2},
      number = {3},
      pages = {58-66},
      doi = {10.11648/j.ijem.20180203.12},
      url = {https://doi.org/10.11648/j.ijem.20180203.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijem.20180203.12},
      abstract = {Power plants are very important for continuous electricity energy supply and have been affected by many disruptions. Furthermore, the power grid is a critical item for both economy and society. Accordingly, the aim of this paper is to adopt a risk assessment tool combining an improved Failure Mode and Effect Analysis (FMEA), Analytical Hierarchy Process (AHP) and enhanced Risk Balance Score Card (RBSC) to model nine risk categories in the energy sector. The outputs of the improved FMEA methodology will be utilised as the inputs for the BSC-AHP framework. The improved FMEA methodology combines the exponential and weighted geometric mean to overcome some drawbacks of the conventional FMEA. The approach helps the top management in prioritising 84 risk indicators particularly, in power plants. The results of this model elucidate that the highest priority (most risky perspective) is for the supply chain perspective with 24.2% of the influence, followed by the internal and operational business process perspective with 18.4%. In this perspective, the technical risk is the key risk with 10.4% followed by the disruption risk with 9.4% while the lowest priority risk in this perspective is the project neglect risk with 2.5%. The sustainability perspective coming as the third priority perspective with 17.7%, where the environmental and safety health category covers about 41.7%, followed by the technological pillar with 35.5% and the social pillar with 22.8%. At the fourth level, the customer/demand perspective is coming with 14%, where the load forecasting risk has the highest priority in this perspective with 49%. The learning and growth perspective stay at the fifth level with 13% where the human resources risks category has more influence than the management risks category. The lowest risk perspective priority is the economic perspective with 12.7%. These results will help the top management in taking a holistic view of various non-technical risks at the strategic level and the priority for each one then, the suitable decision can be taken. The significance of this research is in presenting a novel improved for the traditional FMEA and combining it with the BSC-AHP methods to improve the risk assessment process of 84 risks of six perspectives of BSC in power plants at the strategic level.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Hybrid Framework of, EWGM-FMEA, Analytical Hierarchy Process and Risk Balance Score Card for Risks Assessment in Energy Sector
    AU  - Sahar Mohammad Al Mashaqbeh
    AU  - Jose Eduardo Munive Hernandez
    AU  - Mohammad Khurshid Khan
    Y1  - 2018/12/17
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ijem.20180203.12
    DO  - 10.11648/j.ijem.20180203.12
    T2  - International Journal of Engineering Management
    JF  - International Journal of Engineering Management
    JO  - International Journal of Engineering Management
    SP  - 58
    EP  - 66
    PB  - Science Publishing Group
    SN  - 2640-1568
    UR  - https://doi.org/10.11648/j.ijem.20180203.12
    AB  - Power plants are very important for continuous electricity energy supply and have been affected by many disruptions. Furthermore, the power grid is a critical item for both economy and society. Accordingly, the aim of this paper is to adopt a risk assessment tool combining an improved Failure Mode and Effect Analysis (FMEA), Analytical Hierarchy Process (AHP) and enhanced Risk Balance Score Card (RBSC) to model nine risk categories in the energy sector. The outputs of the improved FMEA methodology will be utilised as the inputs for the BSC-AHP framework. The improved FMEA methodology combines the exponential and weighted geometric mean to overcome some drawbacks of the conventional FMEA. The approach helps the top management in prioritising 84 risk indicators particularly, in power plants. The results of this model elucidate that the highest priority (most risky perspective) is for the supply chain perspective with 24.2% of the influence, followed by the internal and operational business process perspective with 18.4%. In this perspective, the technical risk is the key risk with 10.4% followed by the disruption risk with 9.4% while the lowest priority risk in this perspective is the project neglect risk with 2.5%. The sustainability perspective coming as the third priority perspective with 17.7%, where the environmental and safety health category covers about 41.7%, followed by the technological pillar with 35.5% and the social pillar with 22.8%. At the fourth level, the customer/demand perspective is coming with 14%, where the load forecasting risk has the highest priority in this perspective with 49%. The learning and growth perspective stay at the fifth level with 13% where the human resources risks category has more influence than the management risks category. The lowest risk perspective priority is the economic perspective with 12.7%. These results will help the top management in taking a holistic view of various non-technical risks at the strategic level and the priority for each one then, the suitable decision can be taken. The significance of this research is in presenting a novel improved for the traditional FMEA and combining it with the BSC-AHP methods to improve the risk assessment process of 84 risks of six perspectives of BSC in power plants at the strategic level.
    VL  - 2
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Department of Mechanical and Automotive Engineering, University of Bradford, Bradford, UK

  • Department of Mechanical and Automotive Engineering, University of Bradford, Bradford, UK

  • Department of Mechanical Engineering, Abdul Wali Khan University, Mardan, Pakistan

  • Sections