| Peer-Reviewed

Investigation of Voltage Drop in the Primary Distribution Network of Ghazni City and Voltage Regulation in That Network

Received: 27 June 2022     Accepted: 25 July 2022     Published: 24 August 2022
Views:       Downloads:
Abstract

The medium voltage feeder of Ghazni city, feeding the subscribers of Ghazni city, has a peak load of 4.5MW. Voltage drop in the network limits the transmission power and increases the transmission power losses. All electrical appliances are designed to work at a certain voltage and at the same voltage can do their normal work. Voltage is one of the basic parameters of the regime in electrical cycles that must be kept constant to the necessary extent for the subscriber. Excessive voltage fluctuations, both up and down, can cause damage to consumers. The purpose of this study is to investigate how the voltage drops and voltage regulates in the 20kV distribution network in Ghazni city. In this research, real field figures obtained from Ghazni Breshna Company have been used in voltage drop calculations. Voltage drop in the primary distribution network of Ghazni city is in the range of 5.7%, which is the highest Losses compared to the standard. IEC60204-1 (Protection of Electrical Machinery and Equipment), which recommends in Section 5-13 that voltage losses from the supply point to the electrical load point should not normally exceed 5% of the rated voltage, indicates a 0.7% increase in voltage drop. Voltage failure in addition to the negative monetary effect reduces the quality of electrical energy.

Published in Engineering Science (Volume 7, Issue 3)
DOI 10.11648/j.es.20220703.11
Page(s) 39-45
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Voltage Drop, Distribution Network, Energy Quality, Power Losses

References
[1] Thakur, R, Chawla P. Voltage drop calculations & design of urban distribution feeders. International Journal of Research in Engineering and Technology, Vol (04), pp 43-55, Oct 2015.
[2] Vujosevic, L. Spahic E. and Rakocevic D., “One Method for the Estimation of voltage drop in Distribution System”, http://www.docstoc.com/document/ education, March 2011.
[3] C. G. Carter-Brown and C. T. Gaunt, “Model for the apportionment of the total voltage drop in Combined Medium and Low Voltage Distribution Feeders”, Journal of South African Institute of Electrical Engineers, Vol. 97 (1) (2006).
[4] S. A. Qureshi and F. Mahmood, “Evaluation by the implementation of Distribution System Planning for Energy Loss Reduction”, Pal. J. Engg. & Appl. Sci., Vol. 4, pp. 43-45, January 2009.
[5] Gönen, Turan. Electric power Distribution Engineering, Third Edition, Network. 2014.
[6] Hamedani Golshan, Mohammad Mehdi, Design, and calculation of electrical energy distribution systems. Spring (2012).
[7] Konstantin S. Turitsyn, “Statistics of voltage drop in radial distribution circuits: a dynamic programming approach”, arXiv, 1006.0158v, June 2010.
[8] M. S. Javaid, U. B. Irshad, A. Hussein, and M. A. Abido, “A novel fuzzy logic controller for smart load voltage regulation,” in Proceedings of the 6th International Conference on Clean Electrical Power (ICCEP ’17), pp. 620–624, Santa Margherita Ligure, Italy, 2017.
[9] B. Ping, X. Zhang, and Q. Song, “Voltage control strategy for integrated medium and low voltage distribution network based on active-reactive power coordination optimization,” in Proceedings of the 2020 Chinese Automation Congress (CAC), pp. 1187–1192, Qingdao, China, September 2020.
[10] Z. Ping, Z. Qiqi, and A. Xiaomeng, “Network reconfiguration and reactive power voltage regulation coordinated robust optimization for active distribution network considering extreme scenarios,” Transactions of China Electrotechnical Society, pp. 1–11, 2021, https://kns.cnki.net/kcms/detail/11.2188.TM.20210512.1821.001.html.
[11] L. Wang, R. Yan, and T. K. Saha, “Voltage regulation challenges with unbalanced pv integration in low voltage distribution systems and the corresponding solution,” Applied Energy, vol. 256, p. 113927, 2019.
[12] S. Su, H. Yong, W. Wei, and W. Shidan, “Voltage regulation strategy for distribution network based on reactive power compensation of electric vehicles,” Automation of Electric Power Systems, vol. 41, no. 10, pp. 72–81, 2017.
[13] J. S. Chen, T. Xu, and J. H. Zhou, “Voltage profile optimization of active distribution network through a distributed approach,” in Proceedings of the International Conference on Renewable Power Generation (RPG 2015), pp. 1–5, Beijing, China, October 2015.
[14] S. Garc´ıa-Mart´ınez, E. Espinosa-Ju´arez, and C. P´erez-Rojas, “Improvement of voltage sags rates by applying optimal reconfiguration of electrical networks in presence of dg by using tabu search,” in Proceedings of the 2017 International Conference on Computational Science and Computational Intelligence (CSCI), pp. 202–206, Jakarta, Indonesia, December 2017.
[15] X. Peng, W. Beibeil, and B. Yuqing, “Online voltage control method based on topology resource of network and the solving method via transfer reinforcement learning,” Proceedings of the CSEE, vol. 40, no. 22, pp. 7317–7328, 2020.
[16] W. Xian, L. Wenying, X. Peng, N. Yanan, and W. Weizhou, “Reactive power optimization control method for pv station participating in active voltage regulation of power grid,” Electric Power Automation Equipment, vol. 40, no. 07, pp. 76–83, 2020.
Cite This Article
  • APA Style

    Massoud Danishmal, Dost Mohammad Sarwari, Zainullah Serat. (2022). Investigation of Voltage Drop in the Primary Distribution Network of Ghazni City and Voltage Regulation in That Network. Engineering Science, 7(3), 39-45. https://doi.org/10.11648/j.es.20220703.11

    Copy | Download

    ACS Style

    Massoud Danishmal; Dost Mohammad Sarwari; Zainullah Serat. Investigation of Voltage Drop in the Primary Distribution Network of Ghazni City and Voltage Regulation in That Network. Eng. Sci. 2022, 7(3), 39-45. doi: 10.11648/j.es.20220703.11

    Copy | Download

    AMA Style

    Massoud Danishmal, Dost Mohammad Sarwari, Zainullah Serat. Investigation of Voltage Drop in the Primary Distribution Network of Ghazni City and Voltage Regulation in That Network. Eng Sci. 2022;7(3):39-45. doi: 10.11648/j.es.20220703.11

    Copy | Download

  • @article{10.11648/j.es.20220703.11,
      author = {Massoud Danishmal and Dost Mohammad Sarwari and Zainullah Serat},
      title = {Investigation of Voltage Drop in the Primary Distribution Network of Ghazni City and Voltage Regulation in That Network},
      journal = {Engineering Science},
      volume = {7},
      number = {3},
      pages = {39-45},
      doi = {10.11648/j.es.20220703.11},
      url = {https://doi.org/10.11648/j.es.20220703.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.es.20220703.11},
      abstract = {The medium voltage feeder of Ghazni city, feeding the subscribers of Ghazni city, has a peak load of 4.5MW. Voltage drop in the network limits the transmission power and increases the transmission power losses. All electrical appliances are designed to work at a certain voltage and at the same voltage can do their normal work. Voltage is one of the basic parameters of the regime in electrical cycles that must be kept constant to the necessary extent for the subscriber. Excessive voltage fluctuations, both up and down, can cause damage to consumers. The purpose of this study is to investigate how the voltage drops and voltage regulates in the 20kV distribution network in Ghazni city. In this research, real field figures obtained from Ghazni Breshna Company have been used in voltage drop calculations. Voltage drop in the primary distribution network of Ghazni city is in the range of 5.7%, which is the highest Losses compared to the standard. IEC60204-1 (Protection of Electrical Machinery and Equipment), which recommends in Section 5-13 that voltage losses from the supply point to the electrical load point should not normally exceed 5% of the rated voltage, indicates a 0.7% increase in voltage drop. Voltage failure in addition to the negative monetary effect reduces the quality of electrical energy.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Investigation of Voltage Drop in the Primary Distribution Network of Ghazni City and Voltage Regulation in That Network
    AU  - Massoud Danishmal
    AU  - Dost Mohammad Sarwari
    AU  - Zainullah Serat
    Y1  - 2022/08/24
    PY  - 2022
    N1  - https://doi.org/10.11648/j.es.20220703.11
    DO  - 10.11648/j.es.20220703.11
    T2  - Engineering Science
    JF  - Engineering Science
    JO  - Engineering Science
    SP  - 39
    EP  - 45
    PB  - Science Publishing Group
    SN  - 2578-9279
    UR  - https://doi.org/10.11648/j.es.20220703.11
    AB  - The medium voltage feeder of Ghazni city, feeding the subscribers of Ghazni city, has a peak load of 4.5MW. Voltage drop in the network limits the transmission power and increases the transmission power losses. All electrical appliances are designed to work at a certain voltage and at the same voltage can do their normal work. Voltage is one of the basic parameters of the regime in electrical cycles that must be kept constant to the necessary extent for the subscriber. Excessive voltage fluctuations, both up and down, can cause damage to consumers. The purpose of this study is to investigate how the voltage drops and voltage regulates in the 20kV distribution network in Ghazni city. In this research, real field figures obtained from Ghazni Breshna Company have been used in voltage drop calculations. Voltage drop in the primary distribution network of Ghazni city is in the range of 5.7%, which is the highest Losses compared to the standard. IEC60204-1 (Protection of Electrical Machinery and Equipment), which recommends in Section 5-13 that voltage losses from the supply point to the electrical load point should not normally exceed 5% of the rated voltage, indicates a 0.7% increase in voltage drop. Voltage failure in addition to the negative monetary effect reduces the quality of electrical energy.
    VL  - 7
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Electrical Power Engineering Department, Ghazni Technical University, Ghazni, Afghanistan

  • Electrical Power Engineering Department, Ghazni Technical University, Ghazni, Afghanistan

  • Energy Engineering Department, Ghazni Technical University, Ghazni, Afghanistan

  • Sections