| Peer-Reviewed

Design of Control System for Electrolytic Deburring Machine Based on PLC and Touch Screen

Received: 14 March 2019     Accepted: 16 April 2019     Published: 8 July 2019
Views:       Downloads:
Abstract

In the process of machining parts, burrs are hard to avoid. Electrolytic deburring method can obtain high homogeneity and surface quality, which is suitable for metal burrs in complex inner chambers. Therefore, it is widely used in automotive engine, aerospace, pneumatic and hydraulic industries. Electrolytic deburring process is affected by many factors, and its control system design is particularly important. Based on the principle of electrochemical deburring processing and PLC control technology, designs a set of electrochemical deburring machine tool control system, through the analysis of the processing technology and design the PLC closed-loop design idea algorithm and software running flow, through the configuration software design the control system of the human-computer interaction interface, in combination with the RS - 422 bus technology to realize processing parameters and data transmission and processing. According to the characteristics of the deburring machine, an adaptive control system is developed. Specific work includes: machine tool control system requirements analysis; hardware circuit design and communication design; PLC program design and man-machine page design; anti-interference design from both hardware and software aspects; field debugging of the control cabinet to improve the system function. The test results show that the machine tool is stable and reliable, and the deburring effect is very good.

Published in Engineering and Applied Sciences (Volume 4, Issue 3)
DOI 10.11648/j.eas.20190403.12
Page(s) 59-65
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

ECM, Deburring, PLC, HMI, Control

References
[1] Chen Yuanlong, Li Ming, Tang Huohong. Design of Control System for Electrochemical Deburring Machine Tool [J]. Modular Machine Tool and Automation Machining Technology, 2012, 54 (10): 63-65, 68.
[2] Ren Jing, Chen Jing. Current situation and development trend of burr removal abroad, [J]. http://www.cqvip.com.
[3] Xian Jieyu, Fu Xiuqing, Dry for the People, etc. Experimental Study on Electrolytic Finishing of Gear Teeth [J]. Modern Manufacturing Engineering, 2016, 38 (12): 103-107.
[4] Mohsen M Daniali, Gholamreza Vossoughi. Intelligent active vibration control of constrained manipulators in robotic deburring [C]. International Conference on Industrial Mechatronics and Automation, 2009: 76-80.
[5] Hu Yifan, Fan Qingming, Cao Yan, et al. Study on the design method of cathode integral structure for high precision electrochemical machining of spur gear [J]. Electric machining and die, 2018, 53 (02): 29-34.
[6] S Sarkar, S Mitra, B hattacharyya. Mathematical modeling for controlled electrochemical deburring (ECD) [J]. Journal of Materials Processing Technology 2004 (147): 241-246.
[7] Gao Song, Shi Zhengji, He Ning. Design of power supply control system for high frequency pulse electrochemical machining [J]. Instrument technology, 2005 (4): 353-361.
[8] initial flight. MITSUBISHI FX series PLC programming and application [M]. Beijing: Electronics Industry Press, 2010.
[9] Eunjin Koh, Jongho Won, Changseok Bae. Vision-based Virtual Touch Screen Interface [J]. Consumer Electronics, 2008. 8: 1-2.
[10] Yi Hong Ke. Design basis and example of electrical control system [M]. Beijing: Machinery Industry Press, 2005.
[11] Li Ming. Design and Implementation of Control System for Electrochemical Deburring Machine Tool [D]. Hefei: Hefei University of Technology, 2012.
[12] Chen Yuanlong, Wang Tianjiu, Wanshengmei. Development of NC ECM machine tool based on PLC and touch screen technology [J]. Electrical processing and die, 2003 (3): 56-59.
[13] Li Ming. Design of control system of electrolytic deburring machine based on PLC [J]. Journal of shenyang university of technology, 2018, 37 (06): 44-48.
[14] Zhu Xunpeng. Design of the electrical system of the special machine tool for electrochemical deburring of inner cross-hole [J]. Combination machine tool and automatic processing technology, 2016, 58 (07): 63-66.
[15] Zhang Quanxi. Design and implementation of two-axis linkage PLC control system for helical gear electrochemical machining [D]. Hefei: Hefei University of Technology, 2014.
Cite This Article
  • APA Style

    Ming Li, Bo Zhang, Aoyun Xiong. (2019). Design of Control System for Electrolytic Deburring Machine Based on PLC and Touch Screen. Engineering and Applied Sciences, 4(3), 59-65. https://doi.org/10.11648/j.eas.20190403.12

    Copy | Download

    ACS Style

    Ming Li; Bo Zhang; Aoyun Xiong. Design of Control System for Electrolytic Deburring Machine Based on PLC and Touch Screen. Eng. Appl. Sci. 2019, 4(3), 59-65. doi: 10.11648/j.eas.20190403.12

    Copy | Download

    AMA Style

    Ming Li, Bo Zhang, Aoyun Xiong. Design of Control System for Electrolytic Deburring Machine Based on PLC and Touch Screen. Eng Appl Sci. 2019;4(3):59-65. doi: 10.11648/j.eas.20190403.12

    Copy | Download

  • @article{10.11648/j.eas.20190403.12,
      author = {Ming Li and Bo Zhang and Aoyun Xiong},
      title = {Design of Control System for Electrolytic Deburring Machine Based on PLC and Touch Screen},
      journal = {Engineering and Applied Sciences},
      volume = {4},
      number = {3},
      pages = {59-65},
      doi = {10.11648/j.eas.20190403.12},
      url = {https://doi.org/10.11648/j.eas.20190403.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.eas.20190403.12},
      abstract = {In the process of machining parts, burrs are hard to avoid. Electrolytic deburring method can obtain high homogeneity and surface quality, which is suitable for metal burrs in complex inner chambers. Therefore, it is widely used in automotive engine, aerospace, pneumatic and hydraulic industries. Electrolytic deburring process is affected by many factors, and its control system design is particularly important. Based on the principle of electrochemical deburring processing and PLC control technology, designs a set of electrochemical deburring machine tool control system, through the analysis of the processing technology and design the PLC closed-loop design idea algorithm and software running flow, through the configuration software design the control system of the human-computer interaction interface, in combination with the RS - 422 bus technology to realize processing parameters and data transmission and processing. According to the characteristics of the deburring machine, an adaptive control system is developed. Specific work includes: machine tool control system requirements analysis; hardware circuit design and communication design; PLC program design and man-machine page design; anti-interference design from both hardware and software aspects; field debugging of the control cabinet to improve the system function. The test results show that the machine tool is stable and reliable, and the deburring effect is very good.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Design of Control System for Electrolytic Deburring Machine Based on PLC and Touch Screen
    AU  - Ming Li
    AU  - Bo Zhang
    AU  - Aoyun Xiong
    Y1  - 2019/07/08
    PY  - 2019
    N1  - https://doi.org/10.11648/j.eas.20190403.12
    DO  - 10.11648/j.eas.20190403.12
    T2  - Engineering and Applied Sciences
    JF  - Engineering and Applied Sciences
    JO  - Engineering and Applied Sciences
    SP  - 59
    EP  - 65
    PB  - Science Publishing Group
    SN  - 2575-1468
    UR  - https://doi.org/10.11648/j.eas.20190403.12
    AB  - In the process of machining parts, burrs are hard to avoid. Electrolytic deburring method can obtain high homogeneity and surface quality, which is suitable for metal burrs in complex inner chambers. Therefore, it is widely used in automotive engine, aerospace, pneumatic and hydraulic industries. Electrolytic deburring process is affected by many factors, and its control system design is particularly important. Based on the principle of electrochemical deburring processing and PLC control technology, designs a set of electrochemical deburring machine tool control system, through the analysis of the processing technology and design the PLC closed-loop design idea algorithm and software running flow, through the configuration software design the control system of the human-computer interaction interface, in combination with the RS - 422 bus technology to realize processing parameters and data transmission and processing. According to the characteristics of the deburring machine, an adaptive control system is developed. Specific work includes: machine tool control system requirements analysis; hardware circuit design and communication design; PLC program design and man-machine page design; anti-interference design from both hardware and software aspects; field debugging of the control cabinet to improve the system function. The test results show that the machine tool is stable and reliable, and the deburring effect is very good.
    VL  - 4
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Experimental and Practical Training Department, West Anhui University, Liuan, China

  • Experimental and Practical Training Department, West Anhui University, Liuan, China

  • Faculty of Electrical and Opto-Electronic Engineering, West Anhui University, Liuan, China

  • Sections