| Peer-Reviewed

Determination of Friction Coefficient Between Straight Steel Fiber and the Concrete Fri (SSF.C)

Received: 30 January 2015     Accepted: 11 February 2015     Published: 16 February 2015
Views:       Downloads:
Abstract

The friction forces between steel fiber and the concrete in the case of Straight Steel Fiber Reinforced Concrete (SSFRC) are considered as the main factor to generate the bonding between these two building construction materials. Three types of steel fiber are usually used in Fiber Reinforced Concrete (FRC) Straight, Dramix and Tabix. In the case of using straight steel fiber as reinforcement material to improve the resistance capacity of plain concrete under axial or flexural tension forces to obtain Steel Fiber Reinforced Concrete (SFRC), bonding forces at the interface between the steel fiber and the concrete matrix must be satisfactory. Bonding forces between these two materials are generated due to friction forces at the interface; therefore the final evaluation of the bonding forces is related with the real value of the friction forces, consequently the friction coefficient value between straight steel fiber and the concrete is important to evaluate and calculate the real value of the friction forces. This paper is devoted to introduce an experimental study about the mechanism of removing straight steel fiber from concrete matrix which is named as (pull-out test) as well as a programming simulations prepared to represent this mechanism too, these laboratory experiment and computer simulations have been used in determination process of friction coefficient value between straight steel fiber and the concrete Fri (SSF.C).

Published in Advances in Materials (Volume 4, Issue 2)
DOI 10.11648/j.am.20150402.11
Page(s) 20-29
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Straight Steel Fiber Reinforced Concrete (SSFRC), Steel Fiber Reinforced Concrete (SFRC), Fiber Reinforced Concrete (FRC), Steel Fiber, Friction Coefficient Fri (SSF.C), Concrete, Pull-Out

References
[1] Amjad Khabaz, "Non-Metallic Fiber Reinforced Concrete", LAP LAMBERT Academic Publishing, 2014, ISBN 978-3-659-50914-8.
[2] A.Krasnikovs V. Lapsa and M.Eiduks, “NON-TRADITIONAL REINFORCEMENT FOR CONCRETE COMPOSITES - STATE OF THE ART ", Riga Technical University, Latvia, 2007.
[3] Amjad Khabaz. Determination of Friction Coefficient between Glass Fiber and the Concrete Fri(GF.C). International Journal of Materials Science and Applications. Vol. 3, No. 6, 2014, pp. 321-324. doi: 10.11648/j.ijmsa.20140306.17.
[4] A. Krasnikovs, A. Khabaz, G. Shahmenko and V. Lapsa. GLASS AND CARBON FIBER CONCRETE MICROMECHANICAL AND MACROMECHANICAL PROPERTIES // Sc. Proceedings of Riga Technical University, Transport and Engineering, 6 Vol. 28, Latvia, 2008, p.132-141.
[5] Krasņikovs A., Kononova O., Khabaz A., Vība J. Fiberconcrete Non-Linear Fracture Control through Fresh Concrete Flow Numerical Simulation // Journal of Vibroengineering. Vol.12, Iss.2. (2010) pp 149-160.
[6] Fachvereinigung Faserbeton e.V.-. Glassfibre reinforced concrete: practical design and structural analysis // Beton-Verl., 1995.
[7] D. Hull and T. W. Clyne. An Introduction to Composite Materials // Second Edition, 1996, Cambridge University Press.
[8] RILEM Symposium 1978, Testing and Test Methods of Fibre Cement Composites, edited by N. R. Swarmy, The Construction Press, Lancaster, 1978.
[9] S. Frondistou-Yannas. Flexural strength of concrete with randomly oriented glass fibers // Magazine of concrete research: Vol. 29, No. 100: September 1977.
Cite This Article
  • APA Style

    Amjad Khabaz. (2015). Determination of Friction Coefficient Between Straight Steel Fiber and the Concrete Fri (SSF.C). Advances in Materials, 4(2), 20-29. https://doi.org/10.11648/j.am.20150402.11

    Copy | Download

    ACS Style

    Amjad Khabaz. Determination of Friction Coefficient Between Straight Steel Fiber and the Concrete Fri (SSF.C). Adv. Mater. 2015, 4(2), 20-29. doi: 10.11648/j.am.20150402.11

    Copy | Download

    AMA Style

    Amjad Khabaz. Determination of Friction Coefficient Between Straight Steel Fiber and the Concrete Fri (SSF.C). Adv Mater. 2015;4(2):20-29. doi: 10.11648/j.am.20150402.11

    Copy | Download

  • @article{10.11648/j.am.20150402.11,
      author = {Amjad Khabaz},
      title = {Determination of Friction Coefficient Between Straight Steel Fiber and the Concrete Fri (SSF.C)},
      journal = {Advances in Materials},
      volume = {4},
      number = {2},
      pages = {20-29},
      doi = {10.11648/j.am.20150402.11},
      url = {https://doi.org/10.11648/j.am.20150402.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20150402.11},
      abstract = {The friction forces between steel fiber and the concrete in the case of Straight Steel Fiber Reinforced Concrete (SSFRC) are considered as the main factor to generate the bonding between these two building construction materials. Three types of steel fiber are usually used in Fiber Reinforced Concrete (FRC) Straight, Dramix and Tabix. In the case of using straight steel fiber as reinforcement material to improve the resistance capacity of plain concrete under axial or flexural tension forces to obtain Steel Fiber Reinforced Concrete (SFRC), bonding forces at the interface between the steel fiber and the concrete matrix must be satisfactory. Bonding forces between these two materials are generated due to friction forces at the interface; therefore the final evaluation of the bonding forces is related with the real value of the friction forces, consequently the friction coefficient value between straight steel fiber and the concrete is important to evaluate and calculate the real value of the friction forces. This paper is devoted to introduce an experimental study about the mechanism of removing straight steel fiber from concrete matrix which is named as (pull-out test) as well as a programming simulations prepared to represent this mechanism too, these laboratory experiment and computer simulations have been used in determination process of friction coefficient value between straight steel fiber and the concrete Fri (SSF.C).},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Determination of Friction Coefficient Between Straight Steel Fiber and the Concrete Fri (SSF.C)
    AU  - Amjad Khabaz
    Y1  - 2015/02/16
    PY  - 2015
    N1  - https://doi.org/10.11648/j.am.20150402.11
    DO  - 10.11648/j.am.20150402.11
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 20
    EP  - 29
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20150402.11
    AB  - The friction forces between steel fiber and the concrete in the case of Straight Steel Fiber Reinforced Concrete (SSFRC) are considered as the main factor to generate the bonding between these two building construction materials. Three types of steel fiber are usually used in Fiber Reinforced Concrete (FRC) Straight, Dramix and Tabix. In the case of using straight steel fiber as reinforcement material to improve the resistance capacity of plain concrete under axial or flexural tension forces to obtain Steel Fiber Reinforced Concrete (SFRC), bonding forces at the interface between the steel fiber and the concrete matrix must be satisfactory. Bonding forces between these two materials are generated due to friction forces at the interface; therefore the final evaluation of the bonding forces is related with the real value of the friction forces, consequently the friction coefficient value between straight steel fiber and the concrete is important to evaluate and calculate the real value of the friction forces. This paper is devoted to introduce an experimental study about the mechanism of removing straight steel fiber from concrete matrix which is named as (pull-out test) as well as a programming simulations prepared to represent this mechanism too, these laboratory experiment and computer simulations have been used in determination process of friction coefficient value between straight steel fiber and the concrete Fri (SSF.C).
    VL  - 4
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Civil and Environmental Engineering, College of Engineering, Majmaah University, Riyadh, Kingdom of Saudi Arabia

  • Sections