| Peer-Reviewed

Analysis of Dynamic Stability of a Fast Single Craft Being Chased

Received: 28 February 2017     Accepted: 7 April 2017     Published: 16 May 2017
Views:       Downloads:
Abstract

Several important factors such as the metacenter point, the center of gravity and the center of buoyancy that is prevented from rolling unexpectedly need to be considered to create stability in the ship. In this paper, a fast single craft that can move at the maximum speed of 120 kilometers per hour is investigated and analyzed in terms of design and dynamics stability. According to the results of simulation, the drag and lift coefficients are 8.96×105 and 1.46×106 in the motion of single craft respectively. Also the results are desirable if the lift to drag ratio be more than one (Accordingly this ratio is calculated 1.62 in this paper). In the analysis of the movement of the vessels based on the drag and lift coefficients as 2.48×105 and 8.39×105 respectively, the ratio of the two coefficients is 3.38 which indicates the accuracy of the results.

Published in Applied Engineering (Volume 1, Issue 1)
DOI 10.11648/j.ae.20170101.12
Page(s) 13-19
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Dynamic Analysis, Craft, Simulation, Fluent Software, Drag Coefficient

References
[1] M. Moghoomi, F. Ghojavand, F. Heidarzadeh, (2015) “Compare calm and turbulent flow analysis rudder profiles of ships with IFS 61-TR 25 and NACA0020 (by Fluent)”, 3th National Confrence & 1st International Confrence on Applid Researches in Electrical, Mechanical & Mechatronic Engineering. (In Persian).
[2] M. Ueno, Y. Tsukada, (2015) “Rudder effectiveness and speed correction for scale model ship testing”, National Maritime Research Institute, 6-38-1 Shinkawa, Mitaka, Tokyo181-0004, Japan.
[3] P. Vidmar, M. Perkovič, (2013) “Optimization of upwind sailing applying a canting rudder device”, University of Ljubljana, Faculty of Maritime Studies and Transport, Potpomorščakov 4, 6320 Portorož, Slovenia.
[4] B. Ji, X. Luo, X. Wang, X. Peng, Y. Wu, H. Xu, (2011) “Unsteady Numerical Simulation of Cavitating Turbulent Flow Around a Highly Skewed Model Marine Propeller”, China Ship Scientific Research Center, Wuxi 214082, China Journal of Fluids Engineering, Vol. 133, No. 1.
[5] J. Vandamme, Q. Zou, D. Reeve, (2011) “Modeling Floating Object Entry and Exit Using Smoothed Particle Hydrodynamics”, Journal of Waterway, Port, Coastal and Ocean Engineering, pp. 213-224.
[6] N. Montazeri, S. H. Mousavizadegan, F. Bakhtiarinejad, (2010) “The Effectiveness of Moving Masses in Reducing the Roll Motion of Floating Vessels”, International Mechanical Engineering Congress and Exposition, pp. 101-107.
[7] A. Papanikolaou, (2010) “Computer-Aided Design”, Vol. 42, No. 11, pp. 1028–1044.
[8] Y. Tahara, S. Tohyama, T. Katsui, (2006) “CFD-based multi-objective optimization method for ship design”, International Journal for Numerical Methods in Fluids, pp. 499–527.
[9] A. Brown, J. Salced, (2008) “Multiple-Objective Optimization in Naval Ship Design”, American Society of Naval Engineers, Vol. 115, No. 4, pp. 49–62.
[10] M. Chamani, A. Byrami, M. Gholipoor, (2012) “Fluid Mechanics”, Isfahan University Press, pp. 91-92. (In Persian).
[11] M. Saife, M. S. Saife, (1995) “Ship design principles”, Amirkabir University Press, pp. 79-80. (In Persian).
Cite This Article
  • APA Style

    Mohammad Reza Moghoomi, Amin Kolahdooz. (2017). Analysis of Dynamic Stability of a Fast Single Craft Being Chased. Applied Engineering, 1(1), 13-19. https://doi.org/10.11648/j.ae.20170101.12

    Copy | Download

    ACS Style

    Mohammad Reza Moghoomi; Amin Kolahdooz. Analysis of Dynamic Stability of a Fast Single Craft Being Chased. Appl. Eng. 2017, 1(1), 13-19. doi: 10.11648/j.ae.20170101.12

    Copy | Download

    AMA Style

    Mohammad Reza Moghoomi, Amin Kolahdooz. Analysis of Dynamic Stability of a Fast Single Craft Being Chased. Appl Eng. 2017;1(1):13-19. doi: 10.11648/j.ae.20170101.12

    Copy | Download

  • @article{10.11648/j.ae.20170101.12,
      author = {Mohammad Reza Moghoomi and Amin Kolahdooz},
      title = {Analysis of Dynamic Stability of a Fast Single Craft Being Chased},
      journal = {Applied Engineering},
      volume = {1},
      number = {1},
      pages = {13-19},
      doi = {10.11648/j.ae.20170101.12},
      url = {https://doi.org/10.11648/j.ae.20170101.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ae.20170101.12},
      abstract = {Several important factors such as the metacenter point, the center of gravity and the center of buoyancy that is prevented from rolling unexpectedly need to be considered to create stability in the ship. In this paper, a fast single craft that can move at the maximum speed of 120 kilometers per hour is investigated and analyzed in terms of design and dynamics stability. According to the results of simulation, the drag and lift coefficients are 8.96×105 and 1.46×106 in the motion of single craft respectively. Also the results are desirable if the lift to drag ratio be more than one (Accordingly this ratio is calculated 1.62 in this paper). In the analysis of the movement of the vessels based on the drag and lift coefficients as 2.48×105 and 8.39×105 respectively, the ratio of the two coefficients is 3.38 which indicates the accuracy of the results.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Analysis of Dynamic Stability of a Fast Single Craft Being Chased
    AU  - Mohammad Reza Moghoomi
    AU  - Amin Kolahdooz
    Y1  - 2017/05/16
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ae.20170101.12
    DO  - 10.11648/j.ae.20170101.12
    T2  - Applied Engineering
    JF  - Applied Engineering
    JO  - Applied Engineering
    SP  - 13
    EP  - 19
    PB  - Science Publishing Group
    SN  - 2994-7456
    UR  - https://doi.org/10.11648/j.ae.20170101.12
    AB  - Several important factors such as the metacenter point, the center of gravity and the center of buoyancy that is prevented from rolling unexpectedly need to be considered to create stability in the ship. In this paper, a fast single craft that can move at the maximum speed of 120 kilometers per hour is investigated and analyzed in terms of design and dynamics stability. According to the results of simulation, the drag and lift coefficients are 8.96×105 and 1.46×106 in the motion of single craft respectively. Also the results are desirable if the lift to drag ratio be more than one (Accordingly this ratio is calculated 1.62 in this paper). In the analysis of the movement of the vessels based on the drag and lift coefficients as 2.48×105 and 8.39×105 respectively, the ratio of the two coefficients is 3.38 which indicates the accuracy of the results.
    VL  - 1
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Mechanical Engineering, Daneshpajoohan Higher Education Institute, Isfahan, Iran

  • Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Isfahan, Iran

  • Sections