Advances in Materials

Submit a Manuscript

Publishing with us to make your research visible to the widest possible audience.

Propose a Special Issue

Building a community of authors and readers to discuss the latest research and develop new ideas.

A Comparative Study of the Physico-Chemical Properties of Cement-Bonded Particle Boards from Semi-Pulped Bagasse and Newsprints

The objectives of this study were to compare the compatibility of semi-digested pulp and fully digested pulp with cement and to further determine how appropriate these two samples are for the production of outdoor particle boards using the hydration test to determine the compatibility through the compatibility factor obtained using the area ratio method. The effects of chemical additives on the compatibilities of the samples with cement and the existence of bond formation were also looked into. Stems of sugar cane were obtained from the Sabo market in Ile-Ife, Osun state, Nigeria while newspaper prints were also gathered from Obafemi Awolowo University, Ile-Ife, Nigeria. The samples were converted to mesh, bleached and then converted to pulp. Different tests comprising proximate analysis, phytochemical screening, compatibility test and hydration experiment. The results of physical tests showed that bagasse is light yellow in colour while the newsprint is yellow solid in colour. Phytochemical screening results indicated that saponins, alkaloids, and tannins were present in high concentration. Infrared analysis indicated the notable presence of hydroxyl, ester and carbonyl groups in the samples. Based on the compatibility values, the addition of additives such as CaCl2 produced higher compatibility values. The study concluded that semi-pulped bagasse and the newsprints are appropriate for the production of the particle boards.

Cement, Compatibility Factor, Fully Digested Pulp, Particle Boards, Semi-Digested Pulp

APA Style

Olaoluwa Ayobami Ogunkunle, Charles Emeka Umenwa. (2023). A Comparative Study of the Physico-Chemical Properties of Cement-Bonded Particle Boards from Semi-Pulped Bagasse and Newsprints. Advances in Materials, 12(2), 25-30. https://doi.org/10.11648/j.am.20231202.12

ACS Style

Olaoluwa Ayobami Ogunkunle; Charles Emeka Umenwa. A Comparative Study of the Physico-Chemical Properties of Cement-Bonded Particle Boards from Semi-Pulped Bagasse and Newsprints. Adv. Mater. 2023, 12(2), 25-30. doi: 10.11648/j.am.20231202.12

AMA Style

Olaoluwa Ayobami Ogunkunle, Charles Emeka Umenwa. A Comparative Study of the Physico-Chemical Properties of Cement-Bonded Particle Boards from Semi-Pulped Bagasse and Newsprints. Adv Mater. 2023;12(2):25-30. doi: 10.11648/j.am.20231202.12

Copyright © 2023 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

1. Robert E. A, (1984). A Practical Guide for the Preparation of Specimens for XRF and XRD Analysis, Wiley, 1998, ISBN 0-471-19458-1. Pp 11-13.
2. Convey, H. A, Williams, G. J., Hatton, J. V., (2006). Fibre Surface Characteristics of Hardwood Refiner Pulps 2006.
3. Kellomaki (1998). Chemistry of Pulping (2nd ed.), Oxford: Butterworth-Heinemann, ISBN 0080379419.P. 240.
4. Bektas, I., Guler, C., Kalaycioglu, H., Mengeloglu, F., Nacar, M., (2005). The manufacture of particleboards using sunflower stalks (Helianthusannuus L.) and poplar wood (Populus alba L.). J. Compos. Mater. 39 (5), 467–473.
5. Ruseckaite, R. A., Ciannamea, E. M., Leiva, P., & Stefani, P. M. (2007). Particleboards based on rice husk (pp. 1-12). Nova Science Publishing Inc.: New York.
6. Silva, D. A. L., Ometto, A. R., Garcia, R. P., Freire, F. M. C. S., Varanda, L. D., & Christoforo, A. L. (2015). Life Cycle assessment of wood-based composites: State-of-the-art and opportunities for reducing environmental impacts. Non-conventional Building Materials based on agro-industrial wastes, 143.
7. Maulana, M. I., Lubis, M. A. R., Febrianto, F., Hua, L. S., Iswanto, A. H., Antov, P., & Todaro, L. (2022). Environmentally Friendly Starch-Based Adhesives for Bonding High-Performance Wood Composites: A Review. Forests, 13 (10), 1614.
8. El‐Wakil, N. A., Abou‐Zeid, R. E., Fahmy, Y., & Mohamed, A. Y. (2007). Modified wheat gluten as a binder in particleboard made from reed. Journal of applied polymer science, 106 (6), 3592-3599.
9. AOAC, (1984). Official Methods of Analysis. 11th ed. Association of Official Analytical Chemists, Washington, D. C.
10. Norman R. F. (1966). Biological and Phytochemical Screening of Plants. Journal of Pharmaceutical Sciences. Vol. 55, Issue 3, pages 225-276.
11. Hachim, S. M., Moslemi A. A. (1990). A New Technique to Classify the Compatibility of Wood with Cement. Campbell A. G. USA. Wood Sci. Tech. 24: 345-354.
12. Frybort S. R., Mauritz A. T., Muller U. (2008). Cement bonded composite – A mechanical review. BioResources. Vol. 3: pp. 602-626.
13. Simatupang, M. H. (1979). Water requirement for the production of cement bonded particle board. Holz als Roh-und Werkstoff, 37, 379-382.
14. Alam, M. M., Hossain, M. A., Hossain, M. D., Johir, M. A. H., Hossen, J., Rahman, M. S., & Ahmed, M. B. (2020). The potentiality of rice husk-derived activated carbon: From synthesis to application. Processes, 8 (2), 203.
15. Environmental Impact Assessment, (2006). Pulp, Paper, and Paperboard Industry Background Information for Proposed Air Emission Standards, Manufacturing Processes at Kraft, Sulfite, Soda, and Semi-Chemical Mills. EPA-453 R-93-050a. Office of Air Quality Planning and Standards. Research.
16. Morteza N., Ebrahim G., Mohammad D. G. (2011). The influence of Wood Extractives and Additives on the Hydration Kinetics of Cement Paste and Cement-bonded Particle board. Journal of Applied Sciences, 11: 2186-2192.
17. Moslemi A. A., Garcia J. F. and Hofstrand A. D. (1983). Effect of various treatments and additives on wood-Portland cement-water systems. Wood fibre Science. Vol. 15: pp. 164-176.