| Peer-Reviewed

Research on Lean Production Management Strategy Based on Extension Innovation Method

Received: 10 May 2022     Published: 12 May 2022
Views:       Downloads:
Abstract

Aiming at the problems of low innovation efficiency and waste in domestic manufacturing enterprises, this paper, on the basis of lean improvement, combines the principle of conjugate analysis to solve the contradictions in production, and uses the extension innovation method to optimize the production line optimization. E-type engine is the research object,By implementing extension transformation, impossible problems can be transformed into possible problems, infeasible problems can be transformed into feasible problems, and unknown problems can be transformed into knowable problems.First of all, this paper finds the existing problems by collecting data, establishes the employee model, inventory model, working time model, and conducts correlation analysis and divergence analysis to get the methods and approaches to solve the conflicting problems, and establishes the compatibility function of the waste problem. , and quantify the degree of waste. Secondly, the extension analysis of the E-type engine extension model is carried out, and the relationship between them is found from the angle of soft and hard conjugate. Thirdly, the conjugate transformation is carried out on the model, and the basic elements are transformed by the basic transformation method and the extension transformation operation method. Finally, generate a variety of improvement strategies, evaluate the goodness of the extension strategy, and select the extension strategy greater than 0 as the optimal extension strategy according to the company's requirements. The extension method can solve the contradictions in production management.

Published in Science Innovation (Volume 10, Issue 2)
DOI 10.11648/j.si.20221002.11
Page(s) 24-30
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Production Management, Extension Innovation Method, Conjugate Pair Method, Lean Production

References
[1] 周武静,徐学军,叶飞.精益生产组成要素之间的关系研究[J].管理学报,2012, 9 (8): 1211-1217。
[2] 杨海成,祁国宁.制造业信息化技术的发展趋势[J].中国机械工程,2004, 15 (19): 1693-1696。
[3] CHEN A L, DONG L, LIU W. Study on the mechanism of improving creative thinking capability based on extenics [J]. Procedia Computer Science, 2015, 55: 119-125.
[4] 杨春燕,罗良维.可拓创新方法在产品设计中的应用[J].包装工程,2016, 37 (14): 7-10。
[5] 周志丹,李兴森. 企业自主创新的可拓创新模型构建与应用研究[J].科学学研究,2010, 28 (5): 770-776。
[6] 张华伟,杨凯.基于可拓创新方法的技术创新过程研究—以石油机械产品为例[J].数学的实践与认识,2013, 43 (6): 19-26。
[7] 李仔浩,杨春燕.基于逆向设计的产品可拓创意生成方法[J].机械设计,2019, 36 (12): 127-133。
[8] 张秀芳.可拓创新方法在企业成本控制中的应用[J].成本与预算,2019 (23): 83-90。
[9] 张立恒.基于AHP-熵权法的我国区域科技创新可拓学评价模型及实证研究[J].工业技术经济,2019, 38 (08): 130-136。
[10] 刘松,宋加升,高长元.基于虚拟供应链的可拓利益分配方法研究[J].管理科学,2005 (02): 14-20。
[11] LI S S, LIU W, Gao H. A Complex Social Network Analysis Model Based on Extenics Basic-element Theory [J]. Science Technology Review, 2014, 32 (36): 21-25.
[12] 何帆.铸造企业推行精益生产方式的几点思考[J].铸造下程.2020, (6): 1-4。
[13] 刘洋.钢铁企业精益成本管理的应用策略及资源配置[J].企业改革与管理.2020, (16):181-182。
[14] 鲍松林.精益生产管理提升钢铁企业竞争力[L]l.冶金与材料,2019, (6): 167-168。
[15] 李凯.生产型企业精益生产方式下的成本管理策略研究[J].成本核算,2020, (259): 4-6。
[16] 郑轶锢.生产型企业精益生产方式下的成本管理探索[[J].财会学习,2019 (21): 134-137。
[17] 卢祖俊.钢铁企业成本管理优化策略研究[[J].企业改革与管理,2019, (24): 111-114。
[18] 杨春燕, 蔡文. 基于可拓学的创意生成与生产研究[J]. 广东工业大学学报, 2016, 33 (01): 12-16。
[19] WANG N N,. MI Y M, GAO H, et al. Logistics Network Model Based on Matter Element Node. Procedia Computer Science. 2016, 91: 351-356.
[20] YANG C Y, CAI W. Extension Engineering [M]. Beijing: Science Press, 2007.
Cite This Article
  • APA Style

    Wang Nana, Wang Qing, Zhang Nan, Li Tongyang. (2022). Research on Lean Production Management Strategy Based on Extension Innovation Method. Science Innovation, 10(2), 24-30. https://doi.org/10.11648/j.si.20221002.11

    Copy | Download

    ACS Style

    Wang Nana; Wang Qing; Zhang Nan; Li Tongyang. Research on Lean Production Management Strategy Based on Extension Innovation Method. Sci. Innov. 2022, 10(2), 24-30. doi: 10.11648/j.si.20221002.11

    Copy | Download

    AMA Style

    Wang Nana, Wang Qing, Zhang Nan, Li Tongyang. Research on Lean Production Management Strategy Based on Extension Innovation Method. Sci Innov. 2022;10(2):24-30. doi: 10.11648/j.si.20221002.11

    Copy | Download

  • @article{10.11648/j.si.20221002.11,
      author = {Wang Nana and Wang Qing and Zhang Nan and Li Tongyang},
      title = {Research on Lean Production Management Strategy Based on Extension Innovation Method},
      journal = {Science Innovation},
      volume = {10},
      number = {2},
      pages = {24-30},
      doi = {10.11648/j.si.20221002.11},
      url = {https://doi.org/10.11648/j.si.20221002.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.si.20221002.11},
      abstract = {Aiming at the problems of low innovation efficiency and waste in domestic manufacturing enterprises, this paper, on the basis of lean improvement, combines the principle of conjugate analysis to solve the contradictions in production, and uses the extension innovation method to optimize the production line optimization. E-type engine is the research object,By implementing extension transformation, impossible problems can be transformed into possible problems, infeasible problems can be transformed into feasible problems, and unknown problems can be transformed into knowable problems.First of all, this paper finds the existing problems by collecting data, establishes the employee model, inventory model, working time model, and conducts correlation analysis and divergence analysis to get the methods and approaches to solve the conflicting problems, and establishes the compatibility function of the waste problem. , and quantify the degree of waste. Secondly, the extension analysis of the E-type engine extension model is carried out, and the relationship between them is found from the angle of soft and hard conjugate. Thirdly, the conjugate transformation is carried out on the model, and the basic elements are transformed by the basic transformation method and the extension transformation operation method. Finally, generate a variety of improvement strategies, evaluate the goodness of the extension strategy, and select the extension strategy greater than 0 as the optimal extension strategy according to the company's requirements. The extension method can solve the contradictions in production management.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Research on Lean Production Management Strategy Based on Extension Innovation Method
    AU  - Wang Nana
    AU  - Wang Qing
    AU  - Zhang Nan
    AU  - Li Tongyang
    Y1  - 2022/05/12
    PY  - 2022
    N1  - https://doi.org/10.11648/j.si.20221002.11
    DO  - 10.11648/j.si.20221002.11
    T2  - Science Innovation
    JF  - Science Innovation
    JO  - Science Innovation
    SP  - 24
    EP  - 30
    PB  - Science Publishing Group
    SN  - 2328-787X
    UR  - https://doi.org/10.11648/j.si.20221002.11
    AB  - Aiming at the problems of low innovation efficiency and waste in domestic manufacturing enterprises, this paper, on the basis of lean improvement, combines the principle of conjugate analysis to solve the contradictions in production, and uses the extension innovation method to optimize the production line optimization. E-type engine is the research object,By implementing extension transformation, impossible problems can be transformed into possible problems, infeasible problems can be transformed into feasible problems, and unknown problems can be transformed into knowable problems.First of all, this paper finds the existing problems by collecting data, establishes the employee model, inventory model, working time model, and conducts correlation analysis and divergence analysis to get the methods and approaches to solve the conflicting problems, and establishes the compatibility function of the waste problem. , and quantify the degree of waste. Secondly, the extension analysis of the E-type engine extension model is carried out, and the relationship between them is found from the angle of soft and hard conjugate. Thirdly, the conjugate transformation is carried out on the model, and the basic elements are transformed by the basic transformation method and the extension transformation operation method. Finally, generate a variety of improvement strategies, evaluate the goodness of the extension strategy, and select the extension strategy greater than 0 as the optimal extension strategy according to the company's requirements. The extension method can solve the contradictions in production management.
    VL  - 10
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • School of Liberal Education, Liaoning University of International Business and Economics, Dalian, China

  • School of Liberal Education, Liaoning University of International Business and Economics, Dalian, China

  • School of Management, Liaoning University of International Business and Economics, Dalian, China

  • School of Liberal Education, Liaoning University of International Business and Economics, Dalian, China

  • Sections