| Peer-Reviewed

Residual Stress Measurement in Si-based Multilayer Structure by Micro-Raman Spectroscopy

Published in Optics (Volume 4, Issue 3-1)
Received: 20 March 2015     Accepted: 8 July 2015     Published: 29 November 2015
Views:       Downloads:
Abstract

Si-based multilayer structures, such as porous silicon (PS) and germanium silicon (ε-Si), are widely used in current microelectronics and Micro-electromechanical Systems (MEMS). During the preparing process of Si-based multilayer structures, some inhomogeneous residual stress is induced, maybe finally leading to structure failure. Micro-Raman Spectroscopy (MRS) is regarded as an effective method for intrinsic stress measurement. In this work, MRS is applied to analysis the residual stress distribution along the cross section of Si-based multilayer structure. Raman experimental results show that there are noticeable residual stress in both silicon substrate and the films (including porous silicon film and germanium-silicon buffer layers). The residual stress is linearly varied in most regions, which leads to an overall warp of the structure. While nonlinear variation of residual stress appears at the interface between different films and Si-substrate. Based on the experimental results, a spectra-mechanical model for analyzing the transversely-isotropic material like porous silicon was presented. A set of detailed Raman stress relationship of porous silicon was achieved. For the study of strained silicon wafer, the structural analyses by using high-resolution transmission electron microscope (HR-TEM) were cooperated with the residual stress measurement by Micro-Raman. And an analysis procedure of the residual stress evaluation on multilayer germanium silicon structures was introduced.

Published in Optics (Volume 4, Issue 3-1)

This article belongs to the Special Issue Optical Techniques for Deformation, Structure and Shape Evaluation

DOI 10.11648/j.optics.s.2015040301.18
Page(s) 33-38
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Residual Stress, Si-based Multilayer Structure, Micro-Raman Spectroscopy, Porous Silicon, Germanium Silicon

References
[1] V. S. Y. Lin, K. Motesharei, K. P. S. Dancil, M. J. Sailor and M. R. Ghadiri, “A porous silicon-based optical interferometric biosensor,” Science, vol. 278, pp. 840-843, 1997
[2] P. Steiner, and W. Lang, “Micromachining applications of porous silicon,” Thin Solid Films, vol. 255, pp. 52-58, 1995.
[3] N. Hayazawa, M. Motohashi, Y. Saito, H. Ishitobi, A. Ono, T. Ichimura, P. Verma and S. Kawata, “Visualization of localized strain of a crystalline thin layer at the nanoscale by tip-enhanced Raman spectroscopy and microscopy,” J. Raman Spectro. vol. 38, pp. 684-696, 2007.
[4] D. Papadimitriou, J. Bitsakis, J. M. López-Villegas, J. Samitier and J. R. Morante, “Depth dependence of stress and porosity in porous silicon: a micro-Raman study,” Thin Solid Films, vol. 349, pp. 293-297, 1999.
[5] G. C. A. M. Janssen, M. M. Abdalla, F. Van Keulen, B. R. Pujada and B. Van Venrooy, “Celebrating the 100th anniversary of the Stoney equation for film stress: Developments from polycrystalline steel strips to single crystal silicon wafers,” Thin Solid Films. vol. 517, pp. 1858-1867, 2009.
[6] S. Doyle, V. A. Chernenko, S. Besseghini, A. Gambardella, M. Kohl, P. Müllner and M. Ohtsuka, “Residual stress in Ni-Mn-Ga thin films deposited on different substrates,” The European Physical Journal-Special Topics, vol. 158, pp. 99-105, 2008.
[7] X. Pan, C. W. Tan, J. Miao, J. Kasim, Z. Shen and E. Xie, “The stress analysis of Si MEMS devices by micro-Raman technique,” Thin Solid Films, vol. 517, pp. 4905-4908, 2009.
[8] G. G. Stoney, “The tension of metallic films deposited by electrolysis”, Proc. Roy. Soc. London. Series A, vol. 82, pp. 172-175, 1909.
[9] Q. Li, W. Qiu, H. Y. Tan, J. G. Guo and Y. L. Kang, “Micro-Raman spectroscopy stress measurement method for porous silicon film,” Optics and Lasers in Engineering, vol. 48, pp.1119-1125, 2010.
[10] W. Qiu, Y. L. Kang, Z. K. Lei, Q. H. Qin, Q. Li and Q. Wang, “Experimental study of the Raman strain rosette based on the carbon nanotube strain sensor,” J. Raman Spectro., vol. 41, pp. 1216-1220, 2010.
[11] W. Qiu, Q. Li, Z. K. Lei, Q. H. Qin, W. L. Deng and Y. L. Kang, “The use of a carbon nanotube sensor for measuring strain by micro-Raman spectroscopy,” Carbon, vol. 53, pp. 161-168, 2013.
[12] W. Qiu and Y. L. Kang, “Mechanical behaviour study of microdevice and nanomaterials by Raman spectroscopy,” Chinese Science Bulletin, vol. 59, pp. 2811-2824, 2014.
[13] I. D. Wolf, “Stress measurements in Si microelectronics devices using Raman spectroscopy,” J. Raman Spectro. vol. 30, pp. 877-883, 1999.
[14] E. Anastassakis and E. Liarokapis, “Polycrystalline Si under strain: Elastic and lattice-dynamical considerations,” J. Appl. phys., vol. 62, pp. 3346-3352, 1987.
[15] F. Demangeot, J. Frandon, M. A. Renucci, O. Briot, B. Gil and R. L. Aulombard, “Raman determination of phonon deformation potentials in α-GaN,” Solid state communications, vol. 100, pp. 207-210, 1996.
[16] Y. Kang, Y. Qiu, Z. Lei and M. Hu, “An application of Raman spectroscopy on the measurement of residual stress in porous silicon,” Optics and lasers in engineering, vol. 43, pp. 847-855, 2005.
[17] W. Qiu, Y. L. Kang, Q. Li, Z. K. Lei and Q. H. Qin, “Experimental analysis for the effect of dynamic capillarity on stress transformation in porous silicon,” Appl. Phys. Lett., vol. 92, 041906, 2008.
[18] O. Bisi, S. Ossicini and L. Pavesi, “Porous silicon: a quantum sponge structure for silicon based optoelectronics,” Surface science reports, vol. 38, pp. 1-126, 2000.
[19] S. Manotas, F. Agulló-Rueda, J. D. Moreno, F. Ben-Hander and J. M. Martınez-Duart, “Lattice-mismatch induced-stress in porous silicon films,” Thin Solid Films, vol. 401, pp. 306-309, 2001.
[20] E. Anastassakis, A. Cantarero and M. Cardona, “Piezo-Raman measurements and anharmonic parameters in silicon and diamond,” Phys. Rev. B, vol. 41, 7529, 1990.
[21] K. Barla, R. Herino, G. Bomchil, J. C. Pfister and A. Freund, “Determination of lattice parameter and elastic properties of porous silicon by X-ray diffraction,” Journal of Crystal Growth, vol. 68, pp. 727-732, 1984.
[22] R.R. Liang, J. Wang, J. Xu, “Fabrication of High Quality SiGe Virtual Substrates by Combining Misfit Strain and Point Defect Techniques,” Tsinghua Science and Technology, vol. 14(1), pp. 62-67, 2009.
[23] T. S. Perova, K. Lyutovich, E. Kasper, A. Waldron, M. Oehme and R. A. Moore, “Stress determination in strained-Si grown on ultra-thin SiGe virtual substrates,” Materials Science and Engineering B, vol. 135, pp. 192-194, 2006.
[24] S. P. Baker and E. Arzt, “Elastic stillness constants of SiGe,” Properties of strained and relaxed Silicon Germanium, E. Kasper Eds. London: INSPEC, 2015, pp. 67-69.
Cite This Article
  • APA Style

    Wei Qiu, CuiLi Cheng, Yu Cheng Zhao, Qiu Li. (2015). Residual Stress Measurement in Si-based Multilayer Structure by Micro-Raman Spectroscopy. Optics, 4(3-1), 33-38. https://doi.org/10.11648/j.optics.s.2015040301.18

    Copy | Download

    ACS Style

    Wei Qiu; CuiLi Cheng; Yu Cheng Zhao; Qiu Li. Residual Stress Measurement in Si-based Multilayer Structure by Micro-Raman Spectroscopy. Optics. 2015, 4(3-1), 33-38. doi: 10.11648/j.optics.s.2015040301.18

    Copy | Download

    AMA Style

    Wei Qiu, CuiLi Cheng, Yu Cheng Zhao, Qiu Li. Residual Stress Measurement in Si-based Multilayer Structure by Micro-Raman Spectroscopy. Optics. 2015;4(3-1):33-38. doi: 10.11648/j.optics.s.2015040301.18

    Copy | Download

  • @article{10.11648/j.optics.s.2015040301.18,
      author = {Wei Qiu and CuiLi Cheng and Yu Cheng Zhao and Qiu Li},
      title = {Residual Stress Measurement in Si-based Multilayer Structure by Micro-Raman Spectroscopy},
      journal = {Optics},
      volume = {4},
      number = {3-1},
      pages = {33-38},
      doi = {10.11648/j.optics.s.2015040301.18},
      url = {https://doi.org/10.11648/j.optics.s.2015040301.18},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.optics.s.2015040301.18},
      abstract = {Si-based multilayer structures, such as porous silicon (PS) and germanium silicon (ε-Si), are widely used in current microelectronics and Micro-electromechanical Systems (MEMS). During the preparing process of Si-based multilayer structures, some inhomogeneous residual stress is induced, maybe finally leading to structure failure. Micro-Raman Spectroscopy (MRS) is regarded as an effective method for intrinsic stress measurement. In this work, MRS is applied to analysis the residual stress distribution along the cross section of Si-based multilayer structure. Raman experimental results show that there are noticeable residual stress in both silicon substrate and the films (including porous silicon film and germanium-silicon buffer layers). The residual stress is linearly varied in most regions, which leads to an overall warp of the structure. While nonlinear variation of residual stress appears at the interface between different films and Si-substrate. Based on the experimental results, a spectra-mechanical model for analyzing the transversely-isotropic material like porous silicon was presented. A set of detailed Raman stress relationship of porous silicon was achieved. For the study of strained silicon wafer, the structural analyses by using high-resolution transmission electron microscope (HR-TEM) were cooperated with the residual stress measurement by Micro-Raman. And an analysis procedure of the residual stress evaluation on multilayer germanium silicon structures was introduced.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Residual Stress Measurement in Si-based Multilayer Structure by Micro-Raman Spectroscopy
    AU  - Wei Qiu
    AU  - CuiLi Cheng
    AU  - Yu Cheng Zhao
    AU  - Qiu Li
    Y1  - 2015/11/29
    PY  - 2015
    N1  - https://doi.org/10.11648/j.optics.s.2015040301.18
    DO  - 10.11648/j.optics.s.2015040301.18
    T2  - Optics
    JF  - Optics
    JO  - Optics
    SP  - 33
    EP  - 38
    PB  - Science Publishing Group
    SN  - 2328-7810
    UR  - https://doi.org/10.11648/j.optics.s.2015040301.18
    AB  - Si-based multilayer structures, such as porous silicon (PS) and germanium silicon (ε-Si), are widely used in current microelectronics and Micro-electromechanical Systems (MEMS). During the preparing process of Si-based multilayer structures, some inhomogeneous residual stress is induced, maybe finally leading to structure failure. Micro-Raman Spectroscopy (MRS) is regarded as an effective method for intrinsic stress measurement. In this work, MRS is applied to analysis the residual stress distribution along the cross section of Si-based multilayer structure. Raman experimental results show that there are noticeable residual stress in both silicon substrate and the films (including porous silicon film and germanium-silicon buffer layers). The residual stress is linearly varied in most regions, which leads to an overall warp of the structure. While nonlinear variation of residual stress appears at the interface between different films and Si-substrate. Based on the experimental results, a spectra-mechanical model for analyzing the transversely-isotropic material like porous silicon was presented. A set of detailed Raman stress relationship of porous silicon was achieved. For the study of strained silicon wafer, the structural analyses by using high-resolution transmission electron microscope (HR-TEM) were cooperated with the residual stress measurement by Micro-Raman. And an analysis procedure of the residual stress evaluation on multilayer germanium silicon structures was introduced.
    VL  - 4
    IS  - 3-1
    ER  - 

    Copy | Download

Author Information
  • Tianjin Key Laboratory of Modern Engineering Mechanics, Department of Mechanics, Tianjin University, Tianjin, China

  • Tianjin Key Laboratory of Modern Engineering Mechanics, Department of Mechanics, Tianjin University, Tianjin, China

  • Tianjin Key Laboratory of Modern Engineering Mechanics, Department of Mechanics, Tianjin University, Tianjin, China

  • Tianjin Key Laboratory of High Speed Cutting and Precision Machining, Tianjin University of Technology and Education, Tianjin, China

  • Sections