Interior and exterior designs stem from the art. Nevertheless, such design is being conceptualized as architectural design. Various materials have been supportive to climax a piece of architecture in which clay is one of them. Its versatility had evolved a new three dimensionality decor in pedagogy of ceramics in this study. The research is advancement in the art of ceramics technology where the use of clay is made possible in the production of 3-dimensional 'art-decor' installed as coverings on building surfaces such as: pillars, wall arc, and window frames. Ceramic clay-arc-décor aims to impart hands-on experience to the teaching methodology of ceramics which is essential to the minimum standard in teacher education. The research employs practical application of tools and materials to fabricate; manipulate and construct finished product. The end product is fired in terra-cotta. The study took place in the Department of Fine and Applied Arts, FCT College of Education, Zuba-Abuja in conjunction with the Ushafa Pottery Centre, Ushafa Bwari Area Council FCT Abuja. It was discovered among many recommendations that the use of clay on architectural building will reduce the burden placed on the use of cement hence improve local content consequence upon improvement of Gross domestic product.
| Published in | Landscape Architecture and Regional Planning (Volume 6, Issue 1) |
| DOI | 10.11648/j.larp.20210601.11 |
| Page(s) | 1-7 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Architecture, Clay-Arc Decor, Terra-cotta, Column Design, Interior and Exterior Design
| [1] | Aboagye, D. (2015). Multiplicity in Struggle: Ceramic Sculptures. A Master Thesis, Faculty of Art, College of Art and Built Environment Kwame Nkrumah University of Science and Technology. |
| [2] | Adeoti, A., Ajileye, M., Odunola, Bello., Saadu, I., Victor, O and Emmanuel, A., (2011). Interlocking Bricks made from Clay as a Dynamic Alternative for Land Scape Design. International Journal of Sustainable Development, 4 (9). |
| [3] | Alexis, C. (2016) 5 Ceramic Techniques You Need to Know. Retrieved February 20, 2020 from https://www.google.com/amp/s/www.artsy.net/article/artsy-editorial-5-ceramic-techniques-you-need-to-know/amp |
| [4] | Arleo, A., Boger, c., Burns, M., Gonzalez, A., Jeck, D., Novak, J., Smith, N., Takamori, A and Walsh, M. (2005). The Figure in Clay: Contemporary Sculpting Techniques by Masters Artists. New York: Lark Books. |
| [5] | BNP Media. (2020). Factors to Consider in Ceramic Drying and Firing. Retrieved February 6, 2020 from https://www.industrialheating.com/articles/95370-factors-to-consider-in-ceramic-drying-and-firing. |
| [6] | Ciancio, D. (2015). Cheap, tough and green: why aren't more buildings made of rammed earth? Retrieved August 4, 2020 from https://www.google.com/amp/s/theconversation.com/amp/cheap-tough-and-green-why-arent-more-buildings-made-of-rammed-earth-38040 |
| [7] | Constro, F. (2020). Use of different types of clay in construction. Retrieved September 24, 2020 from https://www.google.com/amp/s/www.traditionalbuilding.com/.amp/opinions/a-look-at-clay |
| [8] | Fraser, H. (1998). Glazes for the Craft Potter. London. A&C Black (Publisher) Ltd. |
| [9] | Gilliatt, A. (2020). How to Make a Model and a Mold for Slip Casting. Retrieved from February 6, 2020 from https://ceramicartsnetwork.org/freebies/free-guides/ceramic-mold-making-techniques/ |
| [10] | Guy Michael, D. (2020). Plaster Mixing 101: How to Mix Plaster for Ceramic Moulds. Retrieved from February 7, 2020 from https://ceramicartsnetwork.org/daily/pottery-making-techniques/making-ceramic-molds/how-to-mix-plaster-for-ceramic-molds/ |
| [11] | Jackie, H. (2020). Making Ceramic Moulds: How to Make a Plaster Mould for Slip Casting. Retrieved from February 21, 2020 from https://thelibraryofmanufacturing.com/ceramic_mold_casting.html |
| [12] | Okonkwo, I. E. (201 4). Students’ Perception of Ceramics Education in Nigeria Tertiary Institutions. An International Multidisciplinary Journal, Ethiopia, 8 (2), 217-2. |
| [13] | Peterson, S. (1992). A Complete Potter’s Hand Book: The Craft and Art of Clay. London. Laurence King Publishing. |
| [14] | Pottery. (2017). Pottery and Sculpting Clay. Retrieved May 23, 2019 from http://www.bigceramicstore.com/clays.html big. |
| [15] | Reference. (2017). Science of Clay. Retrieved May 19, 2019 from https://www.reference.com/science/clay-soil-6be122f4b8cb12da. |
| [16] | Shchurova, E. I. (2016). Modeling of the Ceramics Structure for the Finite Element Analysis. Proceedings of International Conference on Industrial Engineering (ICIE), 150: 179-184. |
| [17] | Sullivan, L. (2014). what-is-building-technology. Retrieved July 16, 2019 from https://www.constructionspecifier.com/what-is-building-technology/ |
| [18] | Webb, P. (2020). From Dust We Come: A Look at Clay. Retrieved September 24, 2020 from https://www.google.com/amp/s/www.traditionalbuilding.com/.amp/opinions/a-look-at-clay |
| [19] | Wienerberger, W. (2020). Clay building materials – Advantages. Retrieved September 24, 2020 from https://wienerberger-world.com/expertise/clay-building-materials-advantages/ |
| [20] | Word Skills International. (2017). Building Technology. Retrieved May 20, 2019 from https://www.worldskills.org. |
| [21] | Xiangcui, H. (2018). Research and Practice of Public Ceramics Teaching Platform——Study on the sharing of Primary and Secondary Schools and University Platforms. Advances in Economics, Business and Management Research, volume 75, 8th International Conference on Education and Management (ICEM 2018). |
| [22] | Yadawei Studio Staff. (2016). The essential drying process for ceramics. Retrieved May 20, 2019 from https://www.google.com/amp/s/www.yadawei.net/single-post/2016/08/21/The-essential-drying-process-for-ceramics |
| [23] | Zakin, R. (1990). Ceramics: Mastering the Craft. London. A&C Black (Publisher) Ltd. |
| [24] | Zhao Shouli, L. (2019). Analysis of the Relationship between Modelling and Decoration in Ceramic Design. Advances in Economics, Business and Management Research, volume 109. |
APA Style
Adeoti Adebowale Abduljaleel. (2021). Ceramic Clay-Arc-Decor: A New Technology for Interior and Exterior Column Designs. Landscape Architecture and Regional Planning, 6(1), 1-7. https://doi.org/10.11648/j.larp.20210601.11
ACS Style
Adeoti Adebowale Abduljaleel. Ceramic Clay-Arc-Decor: A New Technology for Interior and Exterior Column Designs. Landsc. Archit. Reg. Plan. 2021, 6(1), 1-7. doi: 10.11648/j.larp.20210601.11
AMA Style
Adeoti Adebowale Abduljaleel. Ceramic Clay-Arc-Decor: A New Technology for Interior and Exterior Column Designs. Landsc Archit Reg Plan. 2021;6(1):1-7. doi: 10.11648/j.larp.20210601.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.larp.20210601.11,
author = {Adeoti Adebowale Abduljaleel},
title = {Ceramic Clay-Arc-Decor: A New Technology for Interior and Exterior Column Designs},
journal = {Landscape Architecture and Regional Planning},
volume = {6},
number = {1},
pages = {1-7},
doi = {10.11648/j.larp.20210601.11},
url = {https://doi.org/10.11648/j.larp.20210601.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.larp.20210601.11},
abstract = {Interior and exterior designs stem from the art. Nevertheless, such design is being conceptualized as architectural design. Various materials have been supportive to climax a piece of architecture in which clay is one of them. Its versatility had evolved a new three dimensionality decor in pedagogy of ceramics in this study. The research is advancement in the art of ceramics technology where the use of clay is made possible in the production of 3-dimensional 'art-decor' installed as coverings on building surfaces such as: pillars, wall arc, and window frames. Ceramic clay-arc-décor aims to impart hands-on experience to the teaching methodology of ceramics which is essential to the minimum standard in teacher education. The research employs practical application of tools and materials to fabricate; manipulate and construct finished product. The end product is fired in terra-cotta. The study took place in the Department of Fine and Applied Arts, FCT College of Education, Zuba-Abuja in conjunction with the Ushafa Pottery Centre, Ushafa Bwari Area Council FCT Abuja. It was discovered among many recommendations that the use of clay on architectural building will reduce the burden placed on the use of cement hence improve local content consequence upon improvement of Gross domestic product.},
year = {2021}
}
TY - JOUR T1 - Ceramic Clay-Arc-Decor: A New Technology for Interior and Exterior Column Designs AU - Adeoti Adebowale Abduljaleel Y1 - 2021/03/26 PY - 2021 N1 - https://doi.org/10.11648/j.larp.20210601.11 DO - 10.11648/j.larp.20210601.11 T2 - Landscape Architecture and Regional Planning JF - Landscape Architecture and Regional Planning JO - Landscape Architecture and Regional Planning SP - 1 EP - 7 PB - Science Publishing Group SN - 2637-4374 UR - https://doi.org/10.11648/j.larp.20210601.11 AB - Interior and exterior designs stem from the art. Nevertheless, such design is being conceptualized as architectural design. Various materials have been supportive to climax a piece of architecture in which clay is one of them. Its versatility had evolved a new three dimensionality decor in pedagogy of ceramics in this study. The research is advancement in the art of ceramics technology where the use of clay is made possible in the production of 3-dimensional 'art-decor' installed as coverings on building surfaces such as: pillars, wall arc, and window frames. Ceramic clay-arc-décor aims to impart hands-on experience to the teaching methodology of ceramics which is essential to the minimum standard in teacher education. The research employs practical application of tools and materials to fabricate; manipulate and construct finished product. The end product is fired in terra-cotta. The study took place in the Department of Fine and Applied Arts, FCT College of Education, Zuba-Abuja in conjunction with the Ushafa Pottery Centre, Ushafa Bwari Area Council FCT Abuja. It was discovered among many recommendations that the use of clay on architectural building will reduce the burden placed on the use of cement hence improve local content consequence upon improvement of Gross domestic product. VL - 6 IS - 1 ER -
Information
Email: