Research Article | | Peer-Reviewed

Assessment of Occupational Health and Safety Risk in the Tukad Ayung Bridge Replacement Project

Received: 6 October 2023     Accepted: 6 November 2023     Published: 17 November 2023
Views:       Downloads:
Abstract

The replacement of the Tukad Ayung Bridge requires a study regarding Occupational Health and Safety risk assessment. Based on initial observations, in the Tukad Ayung bridge replacement project there were several causes of work accidents, such as workers not using complete personal protective equipment, heavy rain causing work to stop, activities adjacent to heavy equipment and so on. The use of heavy equipment and sophisticated machines requires expertise to use them correctly so as to reduce errors which have an impact on increasing the risk of work accidents. The existence of this bridge construction project can also cause disruption to the environment around the project. It is thought that the traffic engineering will trigger traffic jams and cause air pollution around the project location. The data used is qualitative and quantitative data with primary data sources and secondary data. The data collection techniques used were observation, interviews, questionnaires, literature study and documentation study. The data analysis technique used is Hazard Identification, Risk Assessment and Risk Control (HIRARC). The results of the research show that there are 24 types of work accident risks identified in the work of installing concrete girders in the Tukad Ayung bridge replacement project in seven stages of work, namely, the concrete girder preparation stage, making scaffolding (girder truss), erection (setting segmental girder), installing steel prestressing (strand), cable strand stressing work, concrete girder tendon grouting, and the diaphragm installation stage.

Published in Journal of Civil, Construction and Environmental Engineering (Volume 8, Issue 6)
DOI 10.11648/j.jccee.20230806.11
Page(s) 100-106
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Risk, Occupational Safety and Health, HIRARC, Tukad Ayung Bridge

References
[1] F. &. A. A. Sembe, "Effect of Selected Occupational Health and Safety Management Practices on Job Satisfaction of Employees n University Campuses in Nakuru Town Kenya," Journal of Human Resource Management, vol. 5, no. 5, pp. 70-77, 2017.
[2] Soekiswara, "Accident and Work Safety Factors in the Use of Cranes in Construction Projects," Tower Journal, vol. 2, no. 18, p. 42–50, 2020.
[3] D. S. N. L. A. Purohit and Yadav, B. P, "Hazard Identification and Risk Assessment in Construction Industry," International Journal of Applied Engineering Research, vol. 10, no. 13, pp. 7339-7667, 2018.
[4] Y. Saeed, "Safety Management In Construction Projects.," Journal of University Duhok, vol. 20, no. 1, pp. 546-560, 2017.
[5] O. &. O. F. Oreloluwa, "Health and Safety Management Practices in the Building Construction Industry in Akure, Nigeria," American Journal of Engineering and Technology Management., vol. 1, no. 3, pp. 23-28, 2018.
[6] Nopi and Apdeni, "Analysis of Construction Project Work Safety Systems (Case Study: Titian Panjang Bridge Replacement Project – Timber Planting).," Journal of Applied Science in Civil Engineering, vol. 3, no. 1, 2022.
[7] K. S. D. &. T. A. Tiwari, "Hazards Identification, Risk Assessment and Control (HIRAC) in Elevated Metro Construction Project," International Research Journal of Engineering and Technology (IRJET), vol. 8, no. 8, pp. 2038-2043., 2021.
[8] O. 18001, Occupational Health and Safety Management System Guideline For The Implementation of OHSAS 1800, 2007.
[9] A. Jaber, "Assessment Risk In Construction Projects In Iraq Using Copras-Swara Combined Method," Journal of Southwest Jiaotong University, vol. 54, no. 4, pp. 1-12, 2019.
[10] AS/NZS. 4360, "Riak Management Guidlines," pp. 52-55, 2004.
Cite This Article
  • APA Style

    Wayan Muka, I., Ika Wahyuni, P., Made Yatana, I. (2023). Assessment of Occupational Health and Safety Risk in the Tukad Ayung Bridge Replacement Project. Journal of Civil, Construction and Environmental Engineering, 8(6), 100-106. https://doi.org/10.11648/j.jccee.20230806.11

    Copy | Download

    ACS Style

    Wayan Muka, I.; Ika Wahyuni, P.; Made Yatana, I. Assessment of Occupational Health and Safety Risk in the Tukad Ayung Bridge Replacement Project. J. Civ. Constr. Environ. Eng. 2023, 8(6), 100-106. doi: 10.11648/j.jccee.20230806.11

    Copy | Download

    AMA Style

    Wayan Muka I, Ika Wahyuni P, Made Yatana I. Assessment of Occupational Health and Safety Risk in the Tukad Ayung Bridge Replacement Project. J Civ Constr Environ Eng. 2023;8(6):100-106. doi: 10.11648/j.jccee.20230806.11

    Copy | Download

  • @article{10.11648/j.jccee.20230806.11,
      author = {I Wayan Muka and Putu Ika Wahyuni and IB Made Yatana},
      title = {Assessment of Occupational Health and Safety Risk in the Tukad Ayung Bridge Replacement Project},
      journal = {Journal of Civil, Construction and Environmental Engineering},
      volume = {8},
      number = {6},
      pages = {100-106},
      doi = {10.11648/j.jccee.20230806.11},
      url = {https://doi.org/10.11648/j.jccee.20230806.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jccee.20230806.11},
      abstract = {The replacement of the Tukad Ayung Bridge requires a study regarding Occupational Health and Safety risk assessment. Based on initial observations, in the Tukad Ayung bridge replacement project there were several causes of work accidents, such as workers not using complete personal protective equipment, heavy rain causing work to stop, activities adjacent to heavy equipment and so on. The use of heavy equipment and sophisticated machines requires expertise to use them correctly so as to reduce errors which have an impact on increasing the risk of work accidents. The existence of this bridge construction project can also cause disruption to the environment around the project. It is thought that the traffic engineering will trigger traffic jams and cause air pollution around the project location. The data used is qualitative and quantitative data with primary data sources and secondary data. The data collection techniques used were observation, interviews, questionnaires, literature study and documentation study. The data analysis technique used is Hazard Identification, Risk Assessment and Risk Control (HIRARC). The results of the research show that there are 24 types of work accident risks identified in the work of installing concrete girders in the Tukad Ayung bridge replacement project in seven stages of work, namely, the concrete girder preparation stage, making scaffolding (girder truss), erection (setting segmental girder), installing steel prestressing (strand), cable strand stressing work, concrete girder tendon grouting, and the diaphragm installation stage.
    },
     year = {2023}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Assessment of Occupational Health and Safety Risk in the Tukad Ayung Bridge Replacement Project
    AU  - I Wayan Muka
    AU  - Putu Ika Wahyuni
    AU  - IB Made Yatana
    Y1  - 2023/11/17
    PY  - 2023
    N1  - https://doi.org/10.11648/j.jccee.20230806.11
    DO  - 10.11648/j.jccee.20230806.11
    T2  - Journal of Civil, Construction and Environmental Engineering
    JF  - Journal of Civil, Construction and Environmental Engineering
    JO  - Journal of Civil, Construction and Environmental Engineering
    SP  - 100
    EP  - 106
    PB  - Science Publishing Group
    SN  - 2637-3890
    UR  - https://doi.org/10.11648/j.jccee.20230806.11
    AB  - The replacement of the Tukad Ayung Bridge requires a study regarding Occupational Health and Safety risk assessment. Based on initial observations, in the Tukad Ayung bridge replacement project there were several causes of work accidents, such as workers not using complete personal protective equipment, heavy rain causing work to stop, activities adjacent to heavy equipment and so on. The use of heavy equipment and sophisticated machines requires expertise to use them correctly so as to reduce errors which have an impact on increasing the risk of work accidents. The existence of this bridge construction project can also cause disruption to the environment around the project. It is thought that the traffic engineering will trigger traffic jams and cause air pollution around the project location. The data used is qualitative and quantitative data with primary data sources and secondary data. The data collection techniques used were observation, interviews, questionnaires, literature study and documentation study. The data analysis technique used is Hazard Identification, Risk Assessment and Risk Control (HIRARC). The results of the research show that there are 24 types of work accident risks identified in the work of installing concrete girders in the Tukad Ayung bridge replacement project in seven stages of work, namely, the concrete girder preparation stage, making scaffolding (girder truss), erection (setting segmental girder), installing steel prestressing (strand), cable strand stressing work, concrete girder tendon grouting, and the diaphragm installation stage.
    
    VL  - 8
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Civil Engineering Study Program, Indonesian Hindu University, Denpasar, Indonesia

  • Infrastructure and Environmental Engineering, Warmadewa University, Denpasar, Indonesia

  • Infrastructure and Environmental Engineering, Warmadewa University, Denpasar, Indonesia

  • Sections