| Peer-Reviewed

Development of Double-arm Rock Drilling Car for Full Face Tunnelling

Received: 29 August 2019     Accepted: 16 September 2019     Published: 30 September 2019
Views:       Downloads:
Abstract

Blasting excavation is widely used in coal mine roadway excavation, its construction method is flexible, convenient, low cost and adaptable. It can excavate mine tunnels of any shape and length under any environmental conditions. However, the main rock drilling equipment used in the mine is pneumatic rock drilling equipment generally. Although these equipment are simple and reliable, their drilling efficiency is low, the degree of automation is poor, and the working conditions are bad, especially the ability to drill deep holes and large holes is poor, which can not meet the needs of large structural parameters mining method. The newly developed double-arm rock drilling rig for full-face roadway excavation is suitable for the current common construction method of roadway blasting driving. It can replace the traditional pneumatic rock drilling equipment, and drill large holes and small holes simultaneously. It fully meets the requirements of blasting technology. It can not only drill and excavate holes, but also drill roof, side wall and floor bolts holes, to achieve high and low position of drilling operations, for improving the efficiency of roadway excavation, promoting the level of coal mine machinery and equipment in China, these have important practical significance.

Published in Journal of Civil, Construction and Environmental Engineering (Volume 4, Issue 4)
DOI 10.11648/j.jccee.20190404.12
Page(s) 81-86
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Full Section, Excavation, Drilling Rock, Drilling Car

References
[1] WANG Hongli, ZHAO Jinqiao, BAO Wei. Study on mechanism of special rotary-impact roof bolter in coal mining [J]. Mining & Processing Equipment, 2008, 36 (2): 6-10. (in Chinese).
[2] BAO Wei, SUN Wenjin, SONG Hui, etc. Study on key technologies of coal mine rapid drilling equipment and rapid blasting by large diameter straight hole cutting [J]. Metal Mine, 2017 (07): 65-68. (in Chinese).
[3] WANG Hongli, BAO Wei, ZHANG Xiantang, etc. Study on prediction of rotary-impact drilling speed of rock drill [C]. Advances in Engineering Research, ICMEIM, 2017.
[4] WANG Hongli, BAO Wei, XU Taihui, etc. Study on Coal Mine Fast Drilling Equipment and Blasting Key Technology [C]. Advances in Engineering Research, ICEESD, 2017.
[5] ZHAO Tongwu. The research of the energy absorber in a system for measuring the impact energy of rockdrills by means of stress wave [J]. Mining and Metallurgical Engineering, 1987, 7 (2): 1-5. (in Chinese).
[6] LIU Jia. Theoretical and experimental research on static characteristics of mechanism of pneumatic rotary roof bolter [D]. Beijing:Beijing Jiaotong University, 2005. (in Chinese).
[7] ZHAO Xueshe. Present status and development tendency of high efficient roadway driving technology in coal mine [J]. Coal Science and Technology, 2007, (4): 1-4. (in Chinese).
[8] SUN Zhengxin. Discussion on several problems of roof bolter development [J]. Coal Science and Technology, 1999, (12): 37-39. (in Chinese).
[9] ZHAO Tong, LIU Shoukang, TANG Hongping. A study of the efficiency of percussive penetration with joint system [J]. Journal of Rock Mechanics and Engineering, 1994, (1): 19-26.
[10] WU Li, ZHANG Shizhong, LIN Feng. Synthesizing comment on modern rock fragmentation methods [J]. Exploration Engineering, 2000, (2): 49-51. (in Chinese).
[11] ZHAO Tongwu. A study of the efficiency of percussive penetration by wave theory [J]. Acta Metallurgica Sinica, 1980, (3): 263-275. (in Chinese).
[12] DU Changlong. Design and research on impact-rotary roofbolter [J]. Journal of China University of Mining & Technology, 2002, 31 (1): 92-95. (in Chinese).
[13] Du Changting, Wang Shou, Zhongyi, Wang Bo. Overview of the development of fully hydraulic rock drilling rigs [J]. Pneumatic tools for rock drilling machinery, 2018 (04): 21-26.
[14] Duan Yanhui, Guo Yong, Zhao Hongqiang, etc. Structural improvement of dust collecting cover and internal flow field characteristics of rock drilling rig [J]. Mine machinery, 2016, 44 (05): 13-17.
[15] Qiu Kai. Simulation study of anti-jamming valve of rock drilling rig based on AMESim [J]. Modern manufacturing technology and equipment, 2016 (01): 46-49.
[16] Bao Wei, Song Lixin, Zhao Jinqiao, Bao Dali, Wang Hongli, etc. Development of a fast tunneling compound rock drilling rig [J]. Coal mining machinery, 2015, 36 (08): 209-212.
Cite This Article
  • APA Style

    Hongli Wang, Wei Bao, Xiantang Zhang, Shuyue Wang, Wenquan Cheng, et al. (2019). Development of Double-arm Rock Drilling Car for Full Face Tunnelling. Journal of Civil, Construction and Environmental Engineering, 4(4), 81-86. https://doi.org/10.11648/j.jccee.20190404.12

    Copy | Download

    ACS Style

    Hongli Wang; Wei Bao; Xiantang Zhang; Shuyue Wang; Wenquan Cheng, et al. Development of Double-arm Rock Drilling Car for Full Face Tunnelling. J. Civ. Constr. Environ. Eng. 2019, 4(4), 81-86. doi: 10.11648/j.jccee.20190404.12

    Copy | Download

    AMA Style

    Hongli Wang, Wei Bao, Xiantang Zhang, Shuyue Wang, Wenquan Cheng, et al. Development of Double-arm Rock Drilling Car for Full Face Tunnelling. J Civ Constr Environ Eng. 2019;4(4):81-86. doi: 10.11648/j.jccee.20190404.12

    Copy | Download

  • @article{10.11648/j.jccee.20190404.12,
      author = {Hongli Wang and Wei Bao and Xiantang Zhang and Shuyue Wang and Wenquan Cheng and Lixin Song},
      title = {Development of Double-arm Rock Drilling Car for Full Face Tunnelling},
      journal = {Journal of Civil, Construction and Environmental Engineering},
      volume = {4},
      number = {4},
      pages = {81-86},
      doi = {10.11648/j.jccee.20190404.12},
      url = {https://doi.org/10.11648/j.jccee.20190404.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jccee.20190404.12},
      abstract = {Blasting excavation is widely used in coal mine roadway excavation, its construction method is flexible, convenient, low cost and adaptable. It can excavate mine tunnels of any shape and length under any environmental conditions. However, the main rock drilling equipment used in the mine is pneumatic rock drilling equipment generally. Although these equipment are simple and reliable, their drilling efficiency is low, the degree of automation is poor, and the working conditions are bad, especially the ability to drill deep holes and large holes is poor, which can not meet the needs of large structural parameters mining method. The newly developed double-arm rock drilling rig for full-face roadway excavation is suitable for the current common construction method of roadway blasting driving. It can replace the traditional pneumatic rock drilling equipment, and drill large holes and small holes simultaneously. It fully meets the requirements of blasting technology. It can not only drill and excavate holes, but also drill roof, side wall and floor bolts holes, to achieve high and low position of drilling operations, for improving the efficiency of roadway excavation, promoting the level of coal mine machinery and equipment in China, these have important practical significance.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Development of Double-arm Rock Drilling Car for Full Face Tunnelling
    AU  - Hongli Wang
    AU  - Wei Bao
    AU  - Xiantang Zhang
    AU  - Shuyue Wang
    AU  - Wenquan Cheng
    AU  - Lixin Song
    Y1  - 2019/09/30
    PY  - 2019
    N1  - https://doi.org/10.11648/j.jccee.20190404.12
    DO  - 10.11648/j.jccee.20190404.12
    T2  - Journal of Civil, Construction and Environmental Engineering
    JF  - Journal of Civil, Construction and Environmental Engineering
    JO  - Journal of Civil, Construction and Environmental Engineering
    SP  - 81
    EP  - 86
    PB  - Science Publishing Group
    SN  - 2637-3890
    UR  - https://doi.org/10.11648/j.jccee.20190404.12
    AB  - Blasting excavation is widely used in coal mine roadway excavation, its construction method is flexible, convenient, low cost and adaptable. It can excavate mine tunnels of any shape and length under any environmental conditions. However, the main rock drilling equipment used in the mine is pneumatic rock drilling equipment generally. Although these equipment are simple and reliable, their drilling efficiency is low, the degree of automation is poor, and the working conditions are bad, especially the ability to drill deep holes and large holes is poor, which can not meet the needs of large structural parameters mining method. The newly developed double-arm rock drilling rig for full-face roadway excavation is suitable for the current common construction method of roadway blasting driving. It can replace the traditional pneumatic rock drilling equipment, and drill large holes and small holes simultaneously. It fully meets the requirements of blasting technology. It can not only drill and excavate holes, but also drill roof, side wall and floor bolts holes, to achieve high and low position of drilling operations, for improving the efficiency of roadway excavation, promoting the level of coal mine machinery and equipment in China, these have important practical significance.
    VL  - 4
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Academic Affairs Department of Tai'an Campus, Shandong University of Science and Technology, Tai'an, China

  • Academic Affairs Department of Tai'an Campus, Shandong University of Science and Technology, Tai'an, China

  • Academic Affairs Department of Tai'an Campus, Shandong University of Science and Technology, Tai'an, China

  • Senior High School, Shandong Tai'an Great Wall Middle School, Tai'an, China

  • Academic Affairs Department of Tai'an Campus, Shandong University of Science and Technology, Tai'an, China

  • Technology Department, Qingdao Dabang Rock Drill Company Ltd., Qingdao, China

  • Sections