| Peer-Reviewed

Comparing Simulation with Physical Verification and Validation in a Maritime Test Field

Received: 8 September 2020     Accepted: 6 October 2020     Published: 21 October 2020
Views:       Downloads:
Abstract

The steadily increasing complexity of maritime systems substantially raised the need for advanced verification and validation (V&V) as well as certification methods. Extensive simulation-based certification adds new opportunities to existing physical testing. Compared with simulation, field tests are extremely time-consuming and therefore expensive. Furthermore, relevant close-range situations between ships or environmental impacts (e.g. certain types of bad weather situation) are impossible to perform in the field for safety reasons and the uncontrollability of the environment or simply the amount of experiments needed. Systems in the maritime domain (like products for navigation assistance, sensors, communication equipment etc.) are typically not used isolated but as part of a complex setup. More and more sensors and actuators are integrated to provide data for various systems or information services on board a ship and ashore. Since such systems are typically continuously evolving during their service lifetime, the development and maintenance of maritime systems (e.g. bridge systems) need to considered in its usage context that includes interconnected systems and external services, sensors and actuators. CPSoS (Cyber-Physical System of Systems) demand innovative approaches for distributed optimization, novel distributed management and control methodologies that can also deal with partially autonomous systems, and must be resilient to faults or cyber-attacks. In addition, CPSoS engineering no longer maintains the former strict separation between the engineering phases and actual operation. Instead, integrated approaches for the design- and operation- phase are required to cover the full lifecycle by modelling, simulation, validation, and verification (V&V). Thus, prospectively, it will be necessary to monitor the system formation and to conduct a final assessment of the system by means of a suitable application of test cases in a controlled and comprehensible manner. These systems have an emerging behavior and cannot entirely defined during the design phase. At this point it becomes apparent that conventional unit, integration and system tests are no longer sufficient to fully cover and validate the functional limits of Cyber-Physical System of Systems. An acceptable test coverage cannot be achieved with these methods for such systems. In this paper the authors present a use case of collision-regulation compliance checker to compare virtual (i.e. simulation-based) V&V, physical (i.e. in-situ testing) V&V and hybrid, mixed-reality V&V.

Published in International Journal of Systems Engineering (Volume 4, Issue 2)
DOI 10.11648/j.ijse.20200402.12
Page(s) 18-29
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Scenario-based Testing, V&V Lab, Mobile and In-Situ Platform

References
[1] T. Porathe, “ACCSEAS Baseline and Priorities Report,” ACCSEAS Project, 2013.
[2] T. Porathe, M. Lützhöft, and G. Praetorius, “Communicating intended routes in ECDIS: Evaluating technological change,” Accid. Anal. Prev., vol. 60, Nov. 2013, pp. 366–370.
[3] DMA, “An overview of the ‘Maritime Cloud’ – proposed information exchange infrastructure for e-navigation”. Kopenhagen 2013, SNPWG17-9.3.
[4] MONA LISA, “Dynamic and Proactive Routes or ‘greeen-Routes”, Sjofartsverket Sweden, Stockholm.
[5] G. Mannarini, G. Coppini, P. Oddo, and N. Pinardi, “A Prototype of Ship Routing Decision Support System for an Operational Oceanographic Service,” TransNav Int. J. Mar. Navig. Saf. Sea Transp., vol. 7, no. 2, 2013, pp. 53–59.
[6] K. Aichhorn, de la Cuesta de Bedoya, P. Berglez, M. Lopez, M. Troger, and A. Kemetinger, “Maritime Volumetric Navigation System,” in Proceedings of the 25th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS 2012), Nashville, Tennessee, 2012.
[7] SESAME Strait. http://straits-stms.com/Project.html.
[8] H. Adono, “Smart Ship Application Platform Project (SSAP Project)”. [Online]. Available: http://www.mlit.go.jp/common/001039009.pdf. [Accessed: 04-May-2020].
[9] L. Schnieder, and R. Krenkel, "Betreibermodell einer Forschungsinfrastruktur für die Entwicklung intelligenter Mobilitätsdienste im realen Verkehrsumfeld“. 16. Symposium Automatisierungssysteme, Assistenzssysteme und eingebettete Systeme für Transportmittel (AAET), 12.-13. Feb. 2015, Braunschweig. ISBN 978-3-937655-34-5.
[10] A. Rizvanolli, H-C. Burmeister and O. John, The Role of the European Maritime Simulator Network in Assessing Dynamic Sea Traffic Management Principles TransNav, the Int. J. on Marine Navigation and Safety of Sea Transportation 9 559–64, 2015.
[11] M. Brinkmann, A. Hahn, Physical Testbed for Highly Automated and Autonomous Vessels 16th Int. Conf. on Computer and IT Applications in the Maritime Industries COMPIT, 2017.
[12] J. J. Stadler, and N. J. Seidl, “Software failure modes and effects analysis”. In Reliability and Maintainability Symposium (RAMS), 2013 Proceedings-Annual (pp. 1–5): IEEE.
[13] IEC 2018 Failure modes and effects analysis (FMEA and FMECA).
[14] C. Denker, M. Baldauf, S. Fischer, A. Hahn, R. Ziebold, E. Gehrmann, and M. Semann, e-Navigation based cooperative collision avoidance at sea: The MTCAS approach. European Navigation Conference (ENC), 2016.
[15] C. Denker, and A. Hahn, "MTCAS: An e-Navigation Assistance System for Cooperative Collision Avoidance at Sea”, 2017.
[16] M. Steidel, A. Hahn, “MTCAS – An Assistance System for Collision Avoidance at Sea”. Conference Paper March 2019, https://www.researchgate.net/publication/332111082.
[17] H. Burmeister, and W. Bruhn, „Designing an autonomous collision avoidance controller respecting COLREG” in Maritime-Port Technology and Development, 2015.
Cite This Article
  • APA Style

    Arnold Akkermann, Axel Hahn. (2020). Comparing Simulation with Physical Verification and Validation in a Maritime Test Field. International Journal of Systems Engineering, 4(2), 18-29. https://doi.org/10.11648/j.ijse.20200402.12

    Copy | Download

    ACS Style

    Arnold Akkermann; Axel Hahn. Comparing Simulation with Physical Verification and Validation in a Maritime Test Field. Int. J. Syst. Eng. 2020, 4(2), 18-29. doi: 10.11648/j.ijse.20200402.12

    Copy | Download

    AMA Style

    Arnold Akkermann, Axel Hahn. Comparing Simulation with Physical Verification and Validation in a Maritime Test Field. Int J Syst Eng. 2020;4(2):18-29. doi: 10.11648/j.ijse.20200402.12

    Copy | Download

  • @article{10.11648/j.ijse.20200402.12,
      author = {Arnold Akkermann and Axel Hahn},
      title = {Comparing Simulation with Physical Verification and Validation in a Maritime Test Field},
      journal = {International Journal of Systems Engineering},
      volume = {4},
      number = {2},
      pages = {18-29},
      doi = {10.11648/j.ijse.20200402.12},
      url = {https://doi.org/10.11648/j.ijse.20200402.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijse.20200402.12},
      abstract = {The steadily increasing complexity of maritime systems substantially raised the need for advanced verification and validation (V&V) as well as certification methods. Extensive simulation-based certification adds new opportunities to existing physical testing. Compared with simulation, field tests are extremely time-consuming and therefore expensive. Furthermore, relevant close-range situations between ships or environmental impacts (e.g. certain types of bad weather situation) are impossible to perform in the field for safety reasons and the uncontrollability of the environment or simply the amount of experiments needed. Systems in the maritime domain (like products for navigation assistance, sensors, communication equipment etc.) are typically not used isolated but as part of a complex setup. More and more sensors and actuators are integrated to provide data for various systems or information services on board a ship and ashore. Since such systems are typically continuously evolving during their service lifetime, the development and maintenance of maritime systems (e.g. bridge systems) need to considered in its usage context that includes interconnected systems and external services, sensors and actuators. CPSoS (Cyber-Physical System of Systems) demand innovative approaches for distributed optimization, novel distributed management and control methodologies that can also deal with partially autonomous systems, and must be resilient to faults or cyber-attacks. In addition, CPSoS engineering no longer maintains the former strict separation between the engineering phases and actual operation. Instead, integrated approaches for the design- and operation- phase are required to cover the full lifecycle by modelling, simulation, validation, and verification (V&V). Thus, prospectively, it will be necessary to monitor the system formation and to conduct a final assessment of the system by means of a suitable application of test cases in a controlled and comprehensible manner. These systems have an emerging behavior and cannot entirely defined during the design phase. At this point it becomes apparent that conventional unit, integration and system tests are no longer sufficient to fully cover and validate the functional limits of Cyber-Physical System of Systems. An acceptable test coverage cannot be achieved with these methods for such systems. In this paper the authors present a use case of collision-regulation compliance checker to compare virtual (i.e. simulation-based) V&V, physical (i.e. in-situ testing) V&V and hybrid, mixed-reality V&V.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Comparing Simulation with Physical Verification and Validation in a Maritime Test Field
    AU  - Arnold Akkermann
    AU  - Axel Hahn
    Y1  - 2020/10/21
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ijse.20200402.12
    DO  - 10.11648/j.ijse.20200402.12
    T2  - International Journal of Systems Engineering
    JF  - International Journal of Systems Engineering
    JO  - International Journal of Systems Engineering
    SP  - 18
    EP  - 29
    PB  - Science Publishing Group
    SN  - 2640-4230
    UR  - https://doi.org/10.11648/j.ijse.20200402.12
    AB  - The steadily increasing complexity of maritime systems substantially raised the need for advanced verification and validation (V&V) as well as certification methods. Extensive simulation-based certification adds new opportunities to existing physical testing. Compared with simulation, field tests are extremely time-consuming and therefore expensive. Furthermore, relevant close-range situations between ships or environmental impacts (e.g. certain types of bad weather situation) are impossible to perform in the field for safety reasons and the uncontrollability of the environment or simply the amount of experiments needed. Systems in the maritime domain (like products for navigation assistance, sensors, communication equipment etc.) are typically not used isolated but as part of a complex setup. More and more sensors and actuators are integrated to provide data for various systems or information services on board a ship and ashore. Since such systems are typically continuously evolving during their service lifetime, the development and maintenance of maritime systems (e.g. bridge systems) need to considered in its usage context that includes interconnected systems and external services, sensors and actuators. CPSoS (Cyber-Physical System of Systems) demand innovative approaches for distributed optimization, novel distributed management and control methodologies that can also deal with partially autonomous systems, and must be resilient to faults or cyber-attacks. In addition, CPSoS engineering no longer maintains the former strict separation between the engineering phases and actual operation. Instead, integrated approaches for the design- and operation- phase are required to cover the full lifecycle by modelling, simulation, validation, and verification (V&V). Thus, prospectively, it will be necessary to monitor the system formation and to conduct a final assessment of the system by means of a suitable application of test cases in a controlled and comprehensible manner. These systems have an emerging behavior and cannot entirely defined during the design phase. At this point it becomes apparent that conventional unit, integration and system tests are no longer sufficient to fully cover and validate the functional limits of Cyber-Physical System of Systems. An acceptable test coverage cannot be achieved with these methods for such systems. In this paper the authors present a use case of collision-regulation compliance checker to compare virtual (i.e. simulation-based) V&V, physical (i.e. in-situ testing) V&V and hybrid, mixed-reality V&V.
    VL  - 4
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • R&D-Division Transportation, Institute for Computer Sciences, Oldenburg, Germany

  • Department for Computer Science, University of Oldenburg, Oldenburg, Germany

  • Sections