| Peer-Reviewed

Electromagnetic Wave Absorber with Isotropic and Anisotropic Metamaterials

Received: 5 December 2017     Published: 6 December 2017
Views:       Downloads:
Abstract

The absorption characteristics of the electromagnetic wave propagating through one dimensional system with the metamaterials are studied basing on the transfer matrix method. The relations between the absorptivity with the frequency of the incident wave and the thickness of the metamaterials are calculated. The results show that the absorptivity is about 100% near the resonant frequency of the isotropic metamaterials. This means that the metamaterials can be used as a narrow band absorber. The thickness of the metamaterials determines the width of the band. Furthermore the absorption characteristics of the multilayers system with the isotropic and anisotropic metamaterials are studied. The band width increases with the addition of the layer number. The absorption is dependent on the polarization direction of the incident electromagnetic wave for the anisotropic metamaterials. Thus the anisotropic metamaterials can be used to be the polarization tunable absorber. The layer number can also determine the frequency for the maximum absorption as for the multilayer system.

Published in International Journal of Materials Science and Applications (Volume 6, Issue 6)
DOI 10.11648/j.ijmsa.20170606.16
Page(s) 302-308
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Absorber, Metamaterials, Multilayer System, Polarization

References
[1] D. R. Smith, W. J. Padilla, D. C. Vier, S. C. Nemat-Nasser, and S. Schultz, Composite Medium with Simultaneously Negative Permeability and Permittivity, Phys. Rev. Lett. 84 4184 (2000)
[2] L. F. Shen, S. L. He and S. S. Xiao, Stability and quality factor of a one-dimensional subwavelength cavity resonator containing a left-handed material, Phys. Rev. B 69 115111 (2004)
[3] J. Li, L. Zhou, C. T. Chan, P. Sheng, Photonic Band Gap from a Stack of Positive and Negative Index Materials, Phys. Rev. Lett. 90 083901 (2003)
[4] D. R. Smith and D. Schurig, Electromagnetic Wave Propagation in Media with Indefinite Permittivity and Permeability Tensors, Phys. Rev. Lett. 90 077405 (2003)
[5] L. Zhou, C. T. Chan, and P. Sheng, Anisotropy and oblique total transmission at a planar negative-index interface, Phys. Rev. B 68 115424 (2003)
[6] S. Sun, X. Huang, and L. Zhou, Two-dimensional complete photonic gaps from layered periodic structures containing anisotropic left-handed metamaterials, Phys. Rev. E 75 066602 (2007)
[7] L. Hu and S. T. Chui, Characteristics of electromagnetic wave propagation in uniaxially anisotropic left-handed materials, Phys. Rev. B 66, 085108 (2002)
[8] Q. Cheng and T. J. Cui, Electromagnetic interactions between a line source and anisotropic biaxial media with partially negative constitutive parameters, J. of Appl. Phys. 98, 074903 (2005)
[9] J. Hao and L. Zhou, Electromagnetic wave scatterings by anisotropic metamaterials: Generalized 4×4 transfer-matrix method, Phys. Rev. B 77 094201 (2008)
[10] J. Hao, M. Qiu and L. Zhou, Manipulate light polarizations with metamaterials: From microwave to visible, Front. Phys. 5(3), 291 (2010)
[11] H. F. Ma, W. X. Tang, Q. Cheng and T. J. Cui, A single metamaterial plate as bandpass filter, transparent wall, and polarization converter controlled by polarizations Appl. Phys. Lett. 105 081908 (2014)
[12] Y. Dong, X. Zhang, Quantum-optical input–output relations and entanglement distillation by anisotropic planar multilayers, J. Opt. 13 035401 (2011)
[13] Y. Dong, C. Liu, Electromagnetic field quantization and input-output relation for anisotropic magnetodielectric metamaterial, Chin. Phys. B 24 064206 (2015)
[14] Y. Dong, J. You, Propagation of polarized photons through a cavity with an anisotropic metamaterial, Front. Phys. 11, 114206 (2016)
[15] N. I. Landy, S. Sajuyigbe, J. J. Mock, D. R. Smith, W. J. Padilla, Perfect Metamaterial Absorber, Phys. Rev. Lett. 100, 207402 (2008)
[16] C. M. Watts, X. L. Liu, W. J. Padilla, Metamaterial Electromagnetic Wave Absorbers,Advanced Materials, 24 (23): OP98 (2012)
[17] H. Tao et al., “A metamaterial absorber for the terahertz regime: Design, fabrication and characterization,” Opt. Exp., vol. 16, no. 10, pp. 7181–7188 (2008)
[18] X. Liu, T. Starr, A. F. Starr, and W. J. Padilla, “Infrared spatial and frequency selective metamaterial with near-unity absorbance,” Phys. Rev. Lett., vol. 104, 207403 (2010)
[19] L. Huang et al., Experimental demonstration of terahertz metamaterial absorbers with a broad and flat high absorption band, Opt. Lett., vol. 37, no. 2, pp. 154–156 (2012)
[20] J. Grant, Y. Ma, S. Saha, A. Khalid, and D. R. S. Cumming, “Polarization insensitive, broadband terahertz metamaterial absorber,” Opt. Lett., vol. 36, no. 17, pp. 3476–3478 (2011)
Cite This Article
  • APA Style

    Dong Yunxia. (2017). Electromagnetic Wave Absorber with Isotropic and Anisotropic Metamaterials. International Journal of Materials Science and Applications, 6(6), 302-308. https://doi.org/10.11648/j.ijmsa.20170606.16

    Copy | Download

    ACS Style

    Dong Yunxia. Electromagnetic Wave Absorber with Isotropic and Anisotropic Metamaterials. Int. J. Mater. Sci. Appl. 2017, 6(6), 302-308. doi: 10.11648/j.ijmsa.20170606.16

    Copy | Download

    AMA Style

    Dong Yunxia. Electromagnetic Wave Absorber with Isotropic and Anisotropic Metamaterials. Int J Mater Sci Appl. 2017;6(6):302-308. doi: 10.11648/j.ijmsa.20170606.16

    Copy | Download

  • @article{10.11648/j.ijmsa.20170606.16,
      author = {Dong Yunxia},
      title = {Electromagnetic Wave Absorber with Isotropic and Anisotropic Metamaterials},
      journal = {International Journal of Materials Science and Applications},
      volume = {6},
      number = {6},
      pages = {302-308},
      doi = {10.11648/j.ijmsa.20170606.16},
      url = {https://doi.org/10.11648/j.ijmsa.20170606.16},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20170606.16},
      abstract = {The absorption characteristics of the electromagnetic wave propagating through one dimensional system with the metamaterials are studied basing on the transfer matrix method. The relations between the absorptivity with the frequency of the incident wave and the thickness of the metamaterials are calculated. The results show that the absorptivity is about 100% near the resonant frequency of the isotropic metamaterials. This means that the metamaterials can be used as a narrow band absorber. The thickness of the metamaterials determines the width of the band. Furthermore the absorption characteristics of the multilayers system with the isotropic and anisotropic metamaterials are studied. The band width increases with the addition of the layer number. The absorption is dependent on the polarization direction of the incident electromagnetic wave for the anisotropic metamaterials. Thus the anisotropic metamaterials can be used to be the polarization tunable absorber. The layer number can also determine the frequency for the maximum absorption as for the multilayer system.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Electromagnetic Wave Absorber with Isotropic and Anisotropic Metamaterials
    AU  - Dong Yunxia
    Y1  - 2017/12/06
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ijmsa.20170606.16
    DO  - 10.11648/j.ijmsa.20170606.16
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 302
    EP  - 308
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20170606.16
    AB  - The absorption characteristics of the electromagnetic wave propagating through one dimensional system with the metamaterials are studied basing on the transfer matrix method. The relations between the absorptivity with the frequency of the incident wave and the thickness of the metamaterials are calculated. The results show that the absorptivity is about 100% near the resonant frequency of the isotropic metamaterials. This means that the metamaterials can be used as a narrow band absorber. The thickness of the metamaterials determines the width of the band. Furthermore the absorption characteristics of the multilayers system with the isotropic and anisotropic metamaterials are studied. The band width increases with the addition of the layer number. The absorption is dependent on the polarization direction of the incident electromagnetic wave for the anisotropic metamaterials. Thus the anisotropic metamaterials can be used to be the polarization tunable absorber. The layer number can also determine the frequency for the maximum absorption as for the multilayer system.
    VL  - 6
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • School of Electrical and Electronic Engineering, North China Electric Power University, Beijing, China

  • Sections