| Peer-Reviewed

Formation of Laboring Competencies for Workers of the Oil Industry

Received: 2 November 2021     Accepted: 26 November 2021     Published: 11 December 2021
Views:       Downloads:
Abstract

The oil activity is one of the sectors prioritized by the Cuban government and its development requires the constant formation and training of the personnel who work there, thus the strategic mission of the Petroleum Training Center is the training of the personnel who work in the branch oil company and in this the formation of labor competence in drilling operators constitutes a fundamental pillar, for which it is intended to contribute to the formation of laboring competence in drilling operators in the formation scenario of the Teaching Unit Exploration Production and the oil company in Cuba. In order to respond to this reality, the theoretical and methodological references of competency training are studied, which reveals a theoretical plurality that allows combining competency training, the historical-cultural conception and advanced education, taking from them the significant elements, and evidencing the relevance of unity within diversity. It was possible to reach these results through the application of theoretical methods of science, such as the historical-logical method to determine the evolutionary antecedents and the logic of the development of labor competence, and the methods of analysis, synthesis, induction and deduction that led to theoretically and methodologically support the formation of laboring competence. The empirical level of science method used was the review of documents related to the training process and the quality management system since the training of the drilling operator's job competence is a professional training process that is supported by the training process. The determination of the referents and the training scenario in which the training process takes place showed the need for a modeling of the process to adjust it to the training context of the drilling operator.

Published in International Journal of Management and Fuzzy Systems (Volume 7, Issue 4)
DOI 10.11648/j.ijmfs.20210704.13
Page(s) 87-94
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Competency, Laboring Competency, Training, Formation

References
[1] García, J. (2011). Educational model based in competency: importance and need. Update Education Research, Vol. 11 (No. 3), pp 1-24. Retrieved from https://reista.inie.ucr.ac.cr/.
[2] Rubio, P., & García, J. (2014). Management of training by skills in food operators as a competitive advantage of industrial canteens in private companies. URBE Magazine, Vol. 12 (No. 1), pp 207-230.
[3] Aguiar, X., & Rodríguez, L. (2018). The formation of pedagogical competences in university professors. Edumecentro Magazine, Vol. 10 (No. 2), pp. 141-159. Obtained from http://www.revedumecentro.sld.cu.
[4] García, G. (1978). Historical sketch of Education in Cuba. Havana: Editorial Libros para la Educación.
[5] Abreu, R., León, M., Santos, J., Cejas, E., & Álvarez, Z. (2012). Towards a pedagogy of Technical and Professional Education of the XXI century. Havana: (f / d).
[6] Pérez, C. (2015). The pedagogy of the Technical and Professional Teaching in Cuba: Its background. Trabalho necessário, year 13, number 22/2015. Taken from www.uff.br/trabalhonecessario.
[7] Bermúdez, R. (2013). The Public Policies for the Technical and Professional Teaching in Barrel. IAII International Coloquio on Professional Education and Voluntary Abandonment of School. Havana, Barrel. 15 Álvarez, C. (1999). The school in life (Didactics). Havana: Town and Educación (digitized for chapters, with paginated independent).
[8] Carrasco, R. (2014). The seven challenges of the technical and professional education for the century XXI. Project: "Challenges for the Technical Education of the XXIst Century". Chile: Educarchile. Recovered on august 10th 2017 from educarchile.
[9] Tejada, J. (1999). About the professional competencies (I) and (II). Tools Magazine (No. 56 and No. 57), (pp. 20-30), (pp. 8-14).
[10] González M, and Ginoris, O. (2019). Task: Learning and formation of competitions in the University of Matanzas. Introduction., Matanzas, Cuba: CENED. Faculty of Pedagogic Sciences of the University of Matanzas.
[11] Ramos, O. (2017). Educational developmental strategy of the preventive competition of the team of oral health in the oral and dental diseases. Doctor dissertation, University of Pedagogic Sciences Enrique José Varona, Havana.
[12] Pérez, O. (2014). Methodological and Theoretical referents for the boarding of the competitions in the Technical and Professional Education. In R. Abreu Regueiro, and J. Soler Calderius, Didáctica of the Technical and Professional Education (págs. 366-376). Havana: ISPETP Hector Alfredo Pineda Zaldívar.
[13] Añorga, J. (2012). The Advanced Education and the Professional and Human Improvement. Doctor dissertation, Havana.
[14] Téllez, L, Mendiola, M, and Berly, L. (2015). Technical training and continue of the technicians of average level. Cuban experience. TELOS. Magazine of Interdisciplianry Education in Social Sciences. University Raphael Belloso Chacín, Vol. 17 (No. 2), Págs. 242-259. Recovered on October 25, 2017, from https://www.TELOS.
[15] Llerena, O. (2015). The process of technical training from a complex and historic cultural point of wiew. Electronic magazine Investigating current affairs in Education, Vol. 15 (No. 3), Pág. 1-23.
[16] Álvarez, C. (1999). The Pedagogy as a science: Educational Epistemology. Havana.
[17] Álvarez, C. (s.f). The school in life (Didactics). Havana: Town and Educación (digitalized for chapters, with paginated independent).
[18] Bernaza, G. (2013). Forging pedagogic ideas on the postgraduate course from the historic cultural focus. Culiacan: University of Sinaloa.
[19] Eróstegui, R. (8 / 2016). Technical moving formation. Technical professional formation. Bolivia. Recovered on October 7th 2018, from http://www.formaciontecnicabolivia.org/noticias?nid=698 technical moving formation.
[20] Bernaza, G, Troitiño, D, and López, Z. (2018). The professional's overcoming: Moving ideas and advancing. Havana: Leading article University.
[21] Marti, J. (1975). Complete works (Vol. 5). Havana: Social sciences.
[22] Tamanini, H, and Bergero, H. (2012). The corporate universities, a new model of training. Petrotecnia. Recovered on June 12th, 2017 from http://www.petrotecnia.com.ar.
[23] Central State Administration. (February 13, 2018). Decree-law 350/17. Of the training of the workers. Havana, Cuba: Official gazette of Cuba, ISSN 1682-7511.
Cite This Article
  • APA Style

    Miguel Armando Arencibia Davila, Ines M Salcedo Estrada, Ileana Sarmentero Bon. (2021). Formation of Laboring Competencies for Workers of the Oil Industry. International Journal of Management and Fuzzy Systems, 7(4), 87-94. https://doi.org/10.11648/j.ijmfs.20210704.13

    Copy | Download

    ACS Style

    Miguel Armando Arencibia Davila; Ines M Salcedo Estrada; Ileana Sarmentero Bon. Formation of Laboring Competencies for Workers of the Oil Industry. Int. J. Manag. Fuzzy Syst. 2021, 7(4), 87-94. doi: 10.11648/j.ijmfs.20210704.13

    Copy | Download

    AMA Style

    Miguel Armando Arencibia Davila, Ines M Salcedo Estrada, Ileana Sarmentero Bon. Formation of Laboring Competencies for Workers of the Oil Industry. Int J Manag Fuzzy Syst. 2021;7(4):87-94. doi: 10.11648/j.ijmfs.20210704.13

    Copy | Download

  • @article{10.11648/j.ijmfs.20210704.13,
      author = {Miguel Armando Arencibia Davila and Ines M Salcedo Estrada and Ileana Sarmentero Bon},
      title = {Formation of Laboring Competencies for Workers of the Oil Industry},
      journal = {International Journal of Management and Fuzzy Systems},
      volume = {7},
      number = {4},
      pages = {87-94},
      doi = {10.11648/j.ijmfs.20210704.13},
      url = {https://doi.org/10.11648/j.ijmfs.20210704.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmfs.20210704.13},
      abstract = {The oil activity is one of the sectors prioritized by the Cuban government and its development requires the constant formation and training of the personnel who work there, thus the strategic mission of the Petroleum Training Center is the training of the personnel who work in the branch oil company and in this the formation of labor competence in drilling operators constitutes a fundamental pillar, for which it is intended to contribute to the formation of laboring competence in drilling operators in the formation scenario of the Teaching Unit Exploration Production and the oil company in Cuba. In order to respond to this reality, the theoretical and methodological references of competency training are studied, which reveals a theoretical plurality that allows combining competency training, the historical-cultural conception and advanced education, taking from them the significant elements, and evidencing the relevance of unity within diversity. It was possible to reach these results through the application of theoretical methods of science, such as the historical-logical method to determine the evolutionary antecedents and the logic of the development of labor competence, and the methods of analysis, synthesis, induction and deduction that led to theoretically and methodologically support the formation of laboring competence. The empirical level of science method used was the review of documents related to the training process and the quality management system since the training of the drilling operator's job competence is a professional training process that is supported by the training process. The determination of the referents and the training scenario in which the training process takes place showed the need for a modeling of the process to adjust it to the training context of the drilling operator.},
     year = {2021}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Formation of Laboring Competencies for Workers of the Oil Industry
    AU  - Miguel Armando Arencibia Davila
    AU  - Ines M Salcedo Estrada
    AU  - Ileana Sarmentero Bon
    Y1  - 2021/12/11
    PY  - 2021
    N1  - https://doi.org/10.11648/j.ijmfs.20210704.13
    DO  - 10.11648/j.ijmfs.20210704.13
    T2  - International Journal of Management and Fuzzy Systems
    JF  - International Journal of Management and Fuzzy Systems
    JO  - International Journal of Management and Fuzzy Systems
    SP  - 87
    EP  - 94
    PB  - Science Publishing Group
    SN  - 2575-4947
    UR  - https://doi.org/10.11648/j.ijmfs.20210704.13
    AB  - The oil activity is one of the sectors prioritized by the Cuban government and its development requires the constant formation and training of the personnel who work there, thus the strategic mission of the Petroleum Training Center is the training of the personnel who work in the branch oil company and in this the formation of labor competence in drilling operators constitutes a fundamental pillar, for which it is intended to contribute to the formation of laboring competence in drilling operators in the formation scenario of the Teaching Unit Exploration Production and the oil company in Cuba. In order to respond to this reality, the theoretical and methodological references of competency training are studied, which reveals a theoretical plurality that allows combining competency training, the historical-cultural conception and advanced education, taking from them the significant elements, and evidencing the relevance of unity within diversity. It was possible to reach these results through the application of theoretical methods of science, such as the historical-logical method to determine the evolutionary antecedents and the logic of the development of labor competence, and the methods of analysis, synthesis, induction and deduction that led to theoretically and methodologically support the formation of laboring competence. The empirical level of science method used was the review of documents related to the training process and the quality management system since the training of the drilling operator's job competence is a professional training process that is supported by the training process. The determination of the referents and the training scenario in which the training process takes place showed the need for a modeling of the process to adjust it to the training context of the drilling operator.
    VL  - 7
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Exploration Production Teaching Unit, Petroleum Training Center, Cardenas, Cuba

  • Science Training Center, University of Matanzas, Matanzas, Cuba

  • Faculty of Industrial Engineering, University of Matanzas, Matanzas, Cuba

  • Sections