| Peer-Reviewed

Analysis and Design of a Scramjet Engine Inlet Operating from Mach 5 to Mach 10

Received: 14 January 2016     Accepted: 25 January 2016     Published: 16 February 2016
Views:       Downloads:
Abstract

This paper gives a preliminary report of the analysis and design process of a scramjet engine inlet operating over a Mach number range from 5 to 10 without the use of variable geometry (moving parts) in order to find an optimal 2D geometry. An introduction of scramjet engine as well as its first component, the inlet, is given in the beginning and a number of basic inlet configurations are proposed. Inlet efficiency parameters and various design criteria are then explained, followed by a theoretical flow analysis utilizing some simplifying assumptions and the oblique shockwave relations. Next, 2D CFD simulations are carried out for some inlet geometries that are constructed based on the results of the theoretical analysis using the K-Omega SST turbulence model in Fluent to take into consideration boundary layer phenomena that the theoretical analysis is not able to cover. Lastly, a conclusion summarizing the design process is drawn and the optimal model is recommended.

Published in International Journal of Mechanical Engineering and Applications (Volume 4, Issue 1)
DOI 10.11648/j.ijmea.20160401.12
Page(s) 11-23
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Scramjet, Hypersonic, Inlet, Oblique Shockwave, CFD

References
[1] Michael K. Smart, Scramjet inlets, Centre for Hypersonics, The University of Queensland Brisbane 4072, Australia, September 2010.
[2] Marta Marimon Mateu, Study of an Air – Breathing Engine for Hypersonic Flight, Polytechnic University of Catalonia, Spain, September 2013.
[3] Elvia Thompson, Keith Henry and Leslie Williams, Faster Than a Speeding Bullet: Guinness Recognizes NASA Scramjet, NASA, June 2005.
[4] Guy Norris, Skunk Works Reveals SR-71 Successor Plan, Aviation Week & Space Technology, November 2013.
[5] Van Wei, D. M., edited by E. T. Curran, Scramjet Propulsion, Progress in Astronautics and Aeronautics, Vol 189, AIAA, 2000.
[6] Heiser, W. H. and Pratt, D. T., Hypersonic Airbreathing Propulsion, AIAA Education Series, 1994.
[7] Kantrowitz, A., and Donaldson, C., Preliminary Investigation of Supersonic Diffuser, NACA WRL-713, 1945.
[8] Alex Grainger, Guillermo Paniagua, Starting Processes of High Contraction Ratio Scramjet Inlets, Institut von Karman de Dynamique des Fluides, Belgium, January 2012.
[9] John D. Anderson, Jr, Fundamentals of Aerodynamics, 5th Edition, The McGraw-Hill Companies, Inc, New York, 2011.
[10] Kristen N. Roberts, Analysis and Design of a hypersonic Scramjet engine with a starting Mach number of 4.00, Maters thesis, The University of Texas at Arlington, August 2008.
Cite This Article
  • APA Style

    Luu Hong Quan, Nguyen Phu Hung, Le Doan Quang, Vu Ngoc Long. (2016). Analysis and Design of a Scramjet Engine Inlet Operating from Mach 5 to Mach 10. International Journal of Mechanical Engineering and Applications, 4(1), 11-23. https://doi.org/10.11648/j.ijmea.20160401.12

    Copy | Download

    ACS Style

    Luu Hong Quan; Nguyen Phu Hung; Le Doan Quang; Vu Ngoc Long. Analysis and Design of a Scramjet Engine Inlet Operating from Mach 5 to Mach 10. Int. J. Mech. Eng. Appl. 2016, 4(1), 11-23. doi: 10.11648/j.ijmea.20160401.12

    Copy | Download

    AMA Style

    Luu Hong Quan, Nguyen Phu Hung, Le Doan Quang, Vu Ngoc Long. Analysis and Design of a Scramjet Engine Inlet Operating from Mach 5 to Mach 10. Int J Mech Eng Appl. 2016;4(1):11-23. doi: 10.11648/j.ijmea.20160401.12

    Copy | Download

  • @article{10.11648/j.ijmea.20160401.12,
      author = {Luu Hong Quan and Nguyen Phu Hung and Le Doan Quang and Vu Ngoc Long},
      title = {Analysis and Design of a Scramjet Engine Inlet Operating from Mach 5 to Mach 10},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {4},
      number = {1},
      pages = {11-23},
      doi = {10.11648/j.ijmea.20160401.12},
      url = {https://doi.org/10.11648/j.ijmea.20160401.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20160401.12},
      abstract = {This paper gives a preliminary report of the analysis and design process of a scramjet engine inlet operating over a Mach number range from 5 to 10 without the use of variable geometry (moving parts) in order to find an optimal 2D geometry. An introduction of scramjet engine as well as its first component, the inlet, is given in the beginning and a number of basic inlet configurations are proposed. Inlet efficiency parameters and various design criteria are then explained, followed by a theoretical flow analysis utilizing some simplifying assumptions and the oblique shockwave relations. Next, 2D CFD simulations are carried out for some inlet geometries that are constructed based on the results of the theoretical analysis using the K-Omega SST turbulence model in Fluent to take into consideration boundary layer phenomena that the theoretical analysis is not able to cover. Lastly, a conclusion summarizing the design process is drawn and the optimal model is recommended.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Analysis and Design of a Scramjet Engine Inlet Operating from Mach 5 to Mach 10
    AU  - Luu Hong Quan
    AU  - Nguyen Phu Hung
    AU  - Le Doan Quang
    AU  - Vu Ngoc Long
    Y1  - 2016/02/16
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijmea.20160401.12
    DO  - 10.11648/j.ijmea.20160401.12
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 11
    EP  - 23
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.20160401.12
    AB  - This paper gives a preliminary report of the analysis and design process of a scramjet engine inlet operating over a Mach number range from 5 to 10 without the use of variable geometry (moving parts) in order to find an optimal 2D geometry. An introduction of scramjet engine as well as its first component, the inlet, is given in the beginning and a number of basic inlet configurations are proposed. Inlet efficiency parameters and various design criteria are then explained, followed by a theoretical flow analysis utilizing some simplifying assumptions and the oblique shockwave relations. Next, 2D CFD simulations are carried out for some inlet geometries that are constructed based on the results of the theoretical analysis using the K-Omega SST turbulence model in Fluent to take into consideration boundary layer phenomena that the theoretical analysis is not able to cover. Lastly, a conclusion summarizing the design process is drawn and the optimal model is recommended.
    VL  - 4
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Aeronautical and Space Engineering, School of Transportation Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam

  • The Ministry of Science and Technology – Hanoi University of Science and Technology, Hanoi, Vietnam

  • Faculty of Aviation Technologies, Vietnam Aviation Academy, Ho Chi Minh City, Vietnam

  • Department of Aeronautical and Space Engineering, School of Transportation Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam

  • Sections