| Peer-Reviewed

Improved Processing Research on Arc Tooth Cylindrical Gear

Received: 24 February 2017     Accepted: 23 March 2017     Published: 29 June 2017
Views:       Downloads:
Abstract

Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.

Published in International Journal of Environmental Monitoring and Analysis (Volume 5, Issue 3)
DOI 10.11648/j.ijema.20170503.14
Page(s) 91-95
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Arc Tooth Cylindrical Gear, Double-Edged Milling, Processing Method

References
[1] Hai-xiang li. Basic theory of gear transmission and the growing surface test research [D]. Chongqing university, 2012.
[2] Xiao-wei sun. The characteristics and processing method of arc tooth gear [J]. Journal of mechanical engineer, (8):1999-22.
[3] Yang Zhi. Small module the study of the theory of the spiral bevel gear nc gear cutting processing [D]. Suzhou: suzhou university, 2004.
[4] Guo Haisheng. A new type of cylindrical gear teeth method research [J]. Journal of shanxi coal, 1997, (2):27 to 30, and technology press, 1991
[5] Zou Min. Arc cylindrical gear tooth line parameter calculation and selection [J]. Journal of mechanical design and research, 2000, 2:36 to 38.
[6] Yutang dai, there have been He Xing, de-sheng jiang. Arc cylindrical gear tooth line nc hobbing mechanism and experimental study [J]. Journal of mechanical engineering, 2006, 17 (7):706-709.
[7] KouShiYao Liu Mingbao, liang-chen wu. A new method of arc tooth cylindrical gears processing [J]. Modern manufacturing engineering, 2002 (9):16-17.
[8] Ai-ping song, wei-wei wu, noble, Gao Wenjie. Arc tooth cylindrical gears ideal geometric parameters and their processing methods [J]. Journal of Shanghai jiaotong university, 2010. 44 (12):1735-1740.
[9] Wu Daren LuoGuShun. Gear engagement principle [M]. Beijing: the new era of publishing house, 1983.
[10] R. T. Tseng, C. B. Tsay. Mathematical model and undercutting of cylindrical gears with curvilinear shaped teeth [J]. Mechanism and Machine Theory, 2001, 36:1189-1202.
Cite This Article
  • APA Style

    Zhang Zheng, Tang Rui. (2017). Improved Processing Research on Arc Tooth Cylindrical Gear. International Journal of Environmental Monitoring and Analysis, 5(3), 91-95. https://doi.org/10.11648/j.ijema.20170503.14

    Copy | Download

    ACS Style

    Zhang Zheng; Tang Rui. Improved Processing Research on Arc Tooth Cylindrical Gear. Int. J. Environ. Monit. Anal. 2017, 5(3), 91-95. doi: 10.11648/j.ijema.20170503.14

    Copy | Download

    AMA Style

    Zhang Zheng, Tang Rui. Improved Processing Research on Arc Tooth Cylindrical Gear. Int J Environ Monit Anal. 2017;5(3):91-95. doi: 10.11648/j.ijema.20170503.14

    Copy | Download

  • @article{10.11648/j.ijema.20170503.14,
      author = {Zhang Zheng and Tang Rui},
      title = {Improved Processing Research on Arc Tooth Cylindrical Gear},
      journal = {International Journal of Environmental Monitoring and Analysis},
      volume = {5},
      number = {3},
      pages = {91-95},
      doi = {10.11648/j.ijema.20170503.14},
      url = {https://doi.org/10.11648/j.ijema.20170503.14},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijema.20170503.14},
      abstract = {Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Improved Processing Research on Arc Tooth Cylindrical Gear
    AU  - Zhang Zheng
    AU  - Tang Rui
    Y1  - 2017/06/29
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ijema.20170503.14
    DO  - 10.11648/j.ijema.20170503.14
    T2  - International Journal of Environmental Monitoring and Analysis
    JF  - International Journal of Environmental Monitoring and Analysis
    JO  - International Journal of Environmental Monitoring and Analysis
    SP  - 91
    EP  - 95
    PB  - Science Publishing Group
    SN  - 2328-7667
    UR  - https://doi.org/10.11648/j.ijema.20170503.14
    AB  - Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.
    VL  - 5
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • School of Mechanical Engineering, Xihua University, Chengdu, China

  • School of Mechanical Engineering, Panzhihua University, Panzhihua, China

  • Sections