| Peer-Reviewed

An Intelligent Irrigation System for Rural Agriculture

Received: 11 January 2019     Accepted: 5 March 2019     Published: 13 July 2019
Views:       Downloads:
Abstract

The agricultural sector significantly contributes to the economic growth of every country. This sector faces challenges with respect to producing the right quantity and quality of food. Most traditional methods used in growing crops are inadequate to ensuring food security. This challenge can be addressed by applying Information and Communication Technology (I.C.T.) in the agricultural sector. In the cultivation of crops, the use of proper irrigation method is essential in enhancing the growth and yield of crops. This research focuses on the application of information technology to provide the required amount of water needed by crops for growth. With the emergence of Internet of Things (IoT) which involves the interconnection of electronic devices to the Internet and the acquisition of data from these devices through the use sensors, an IoT based Intelligent Irrigation System was built. The Intelligent Irrigation System consisted of a transmitter and a receiver circuit (which is connected to a water pump via an actuator). The transmitter circuit was responsible for reading the moisture content of the soil and transmitting it wirelessly to the receiver. The receiver then made decisions on whether to trigger the pump on or off depending on the received soil moisture data. The Intelligent Irrigation System was piloted on a carrot farm. A total of 16 beds were constructed for the study. It was divided into 2 different blocks. The first block comprised of 8 beds which were manually irrigated and the second block was made up of 8 beds which were irrigated by means of machine-to-machine (M2M) communication. For pre-harvest, the performance indicators used were the height of the plants and the number of leaves per plant. The weight, length and diameter of the carrot plants were used as performance indicators for post-harvest. It was realized that the crops that were watered via M2M communication showed better growth performances as compared to those that were watered manually.

Published in International Journal of Applied Agricultural Sciences (Volume 5, Issue 3)
DOI 10.11648/j.ijaas.20190503.13
Page(s) 75-81
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

GSM, RF, Microprocessor, IoT

References
[1] Poonyth D., Hassan R., Kristen J. F., Calcaterra M., “Is Agricultural Sector Growth a Precondition for Economic Growth? The Case of South Africa, 2001”, 2001.
[2] Siyu Chen, Nicola Fatras, Haoran Su, “Smart Water Irrigation System”, https://ecal.berkeley.edu/files/ce186/projects/chensiyu_late_4615034_63834617_FINAL%20REPORT_FATRAS_SU_CHEN.pdf, [Accessed Online 20th December, 2018].
[3] Michael D. Dukes, Mary Shedd, and Bernard Cardenas-Lailhacar, “Smart Irrigation Controllers: How do Soil Moisture Sensor (SMS) Irrigation Controllers Work?”, University of Florida.
[4] S. Harishankar, R. Sathish Kumar, Sudharsan K. P., U. Vignesh, T. Viveknath, “Solar Powered Smart Irrigation System”, Department of Electrical and Electronics Engineering, Amrita University, Ettimadai, Coimbatore, India, 2014.
[5] Jonathan A. Goldhill, “Why Smart Water Application Technology Makes Sense”, 2004.
[6] Circuit Design using Fritzing, http://fritzing.org/home/, [Accessed Online 14th December, 2018].
[7] Archana and Priya, “Design and Implementation of Automatic Plant Watering System”, International Journal of Advanced Engineering and Global Technology, vol. 4, Issue 01, January, 2016.
[8] Sonail D. Gainwar and Dinesh V. Rojatkar, “Soil Parameters Monitoring with Automatic Irrigation System”, International Journal of Science, Engineering and Technology Research, vol. 4, Issue 11, Nov. 2015.
[9] R. Subalakshmi and Anu Amal, “GSM Based Automated Irrigation using Sensors”, Internal Journal of Trend in Research and Development, March, 2016.
[10] Karan Kansara and Visahl Zaweri, “Sensor Based Automated Irrigation System with IoT”, International Journal of Computer Science and Information Technologies, vol. 6, 2015.
[11] C. H. Chavan and V. Karnade, “Wireless Monitoring of Soil Moisture, Temperature and Humidity using ZigBee in Agriculture”, International Journal of Engineering Trends and Technology, Vol. 11, May 2014.
[12] Yunseop Kim and Robert G. Evans, “Remote Sensing and Control of an Irrigation System using a Distributed Wireless Sensor Network”, IEEE Transactions on Instrumentation and Measurement, vol. 56, July 2008.
[13] 433 MHz RF Transceiver and Receiver Module, https://components101.com/sites/default/files/component_datasheet/433%20MHz%20RF%20Receiver%20Module_0.pdf, [Accessed Online 14th December, 2018 ].
[14] Arduino Microcontroller, https://www.arduino.cc/en/Main/Products, [Accessed Online 15th December, 2018].
[15] Spark Fun Soil Moisture Sensor, https://www.sparkfun.com/products/13322, [Accessed Online 15th December, 2018].
Cite This Article
  • APA Style

    Jerry John Kponyo, Kwasi Adu-Boahen Opare, Ahmed Abdul-Rahman, Justice Owusu Agyemang. (2019). An Intelligent Irrigation System for Rural Agriculture. International Journal of Applied Agricultural Sciences, 5(3), 75-81. https://doi.org/10.11648/j.ijaas.20190503.13

    Copy | Download

    ACS Style

    Jerry John Kponyo; Kwasi Adu-Boahen Opare; Ahmed Abdul-Rahman; Justice Owusu Agyemang. An Intelligent Irrigation System for Rural Agriculture. Int. J. Appl. Agric. Sci. 2019, 5(3), 75-81. doi: 10.11648/j.ijaas.20190503.13

    Copy | Download

    AMA Style

    Jerry John Kponyo, Kwasi Adu-Boahen Opare, Ahmed Abdul-Rahman, Justice Owusu Agyemang. An Intelligent Irrigation System for Rural Agriculture. Int J Appl Agric Sci. 2019;5(3):75-81. doi: 10.11648/j.ijaas.20190503.13

    Copy | Download

  • @article{10.11648/j.ijaas.20190503.13,
      author = {Jerry John Kponyo and Kwasi Adu-Boahen Opare and Ahmed Abdul-Rahman and Justice Owusu Agyemang},
      title = {An Intelligent Irrigation System for Rural Agriculture},
      journal = {International Journal of Applied Agricultural Sciences},
      volume = {5},
      number = {3},
      pages = {75-81},
      doi = {10.11648/j.ijaas.20190503.13},
      url = {https://doi.org/10.11648/j.ijaas.20190503.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijaas.20190503.13},
      abstract = {The agricultural sector significantly contributes to the economic growth of every country. This sector faces challenges with respect to producing the right quantity and quality of food. Most traditional methods used in growing crops are inadequate to ensuring food security. This challenge can be addressed by applying Information and Communication Technology (I.C.T.) in the agricultural sector. In the cultivation of crops, the use of proper irrigation method is essential in enhancing the growth and yield of crops. This research focuses on the application of information technology to provide the required amount of water needed by crops for growth. With the emergence of Internet of Things (IoT) which involves the interconnection of electronic devices to the Internet and the acquisition of data from these devices through the use sensors, an IoT based Intelligent Irrigation System was built. The Intelligent Irrigation System consisted of a transmitter and a receiver circuit (which is connected to a water pump via an actuator). The transmitter circuit was responsible for reading the moisture content of the soil and transmitting it wirelessly to the receiver. The receiver then made decisions on whether to trigger the pump on or off depending on the received soil moisture data. The Intelligent Irrigation System was piloted on a carrot farm. A total of 16 beds were constructed for the study. It was divided into 2 different blocks. The first block comprised of 8 beds which were manually irrigated and the second block was made up of 8 beds which were irrigated by means of machine-to-machine (M2M) communication. For pre-harvest, the performance indicators used were the height of the plants and the number of leaves per plant. The weight, length and diameter of the carrot plants were used as performance indicators for post-harvest. It was realized that the crops that were watered via M2M communication showed better growth performances as compared to those that were watered manually.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - An Intelligent Irrigation System for Rural Agriculture
    AU  - Jerry John Kponyo
    AU  - Kwasi Adu-Boahen Opare
    AU  - Ahmed Abdul-Rahman
    AU  - Justice Owusu Agyemang
    Y1  - 2019/07/13
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ijaas.20190503.13
    DO  - 10.11648/j.ijaas.20190503.13
    T2  - International Journal of Applied Agricultural Sciences
    JF  - International Journal of Applied Agricultural Sciences
    JO  - International Journal of Applied Agricultural Sciences
    SP  - 75
    EP  - 81
    PB  - Science Publishing Group
    SN  - 2469-7885
    UR  - https://doi.org/10.11648/j.ijaas.20190503.13
    AB  - The agricultural sector significantly contributes to the economic growth of every country. This sector faces challenges with respect to producing the right quantity and quality of food. Most traditional methods used in growing crops are inadequate to ensuring food security. This challenge can be addressed by applying Information and Communication Technology (I.C.T.) in the agricultural sector. In the cultivation of crops, the use of proper irrigation method is essential in enhancing the growth and yield of crops. This research focuses on the application of information technology to provide the required amount of water needed by crops for growth. With the emergence of Internet of Things (IoT) which involves the interconnection of electronic devices to the Internet and the acquisition of data from these devices through the use sensors, an IoT based Intelligent Irrigation System was built. The Intelligent Irrigation System consisted of a transmitter and a receiver circuit (which is connected to a water pump via an actuator). The transmitter circuit was responsible for reading the moisture content of the soil and transmitting it wirelessly to the receiver. The receiver then made decisions on whether to trigger the pump on or off depending on the received soil moisture data. The Intelligent Irrigation System was piloted on a carrot farm. A total of 16 beds were constructed for the study. It was divided into 2 different blocks. The first block comprised of 8 beds which were manually irrigated and the second block was made up of 8 beds which were irrigated by means of machine-to-machine (M2M) communication. For pre-harvest, the performance indicators used were the height of the plants and the number of leaves per plant. The weight, length and diameter of the carrot plants were used as performance indicators for post-harvest. It was realized that the crops that were watered via M2M communication showed better growth performances as compared to those that were watered manually.
    VL  - 5
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • College of Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

  • College of Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

  • College of Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

  • College of Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

  • Sections