| Peer-Reviewed

Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine

Received: 15 February 2014     Accepted: 11 April 2014     Published: 20 April 2014
Views:       Downloads:
Abstract

The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed

Published in American Journal of Electrical Power and Energy Systems (Volume 3, Issue 2)
DOI 10.11648/j.epes.20140302.15
Page(s) 45-49
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Power System Stabilizer, ETAP-Software, Transient Stability, Three Phase Fault

References
[1] Kundur, P., Power system stability and control, McGraw-Hill, New York, 1994.
[2] P. Kundur, M. Klein, G.J. Rogers, and M.S. Zywno, “ Application of power system stabilizers for Enhancement of overall system stability,” IEEE Trans., Vol. PWRS-4, No.2, PP.614- 626,May 1989.
[3] P. Kundur, D.C. Lee and H.M. Zein EL-Din,” Power system stabilizer for thermal units: Analytical Techniques and on-site Validation,” IEEE Trans., Vol.PAS-100,PP.81-95,January 1981.
[4] IEEE Committee Report “Proposed Excitation system Definition for synchronous machine,” IEEE Trans., Vol. PAS- 88, PP.1228-1258,August 1969.
[5] IEEE/CIGRE Joint task force on stability terms and definitions, ‘Definition and classification of Power System Stability,’ IEEE trans. Power System, Vol. 19,No.2, PP. 1387-1401, May 2004.
[6] IEEE standard Definitions for excitation system for synchronous machines IEEE standard.
[7] Kamwa I. ,Grandin R. and Trudal G. , ‘IEEE PSS2B versus PSS4B: The limit of performance of modem Power System Stabilizers, IEEE Trans. Power System, Vol., NO.2,PP.903-915,May 2005.
[8] P. Kundur and D.C lee “Advanced excitation control for power system stability Enhancement,” CIGRE Paper 38- 01, paris, France 1986.
[9] E. W. Kimbark, power system stability, Vol.3: Synchronous machines Jon Wiley &Sons,1956.
[10] P.K. Iyambo, R. Tzonova, “Transient Stability Analysis of the IEEE 14-Bus Electrical Power System”, IEEE Conf. 2007
[11] K.R. Padiyar, ‘Power system Dynamics-Stability and control,’ second Edition, (Hyderabad), B.S. Publication, 2002.
[12] IEEE Task force, “Proposed terms and Definition for power system stability,” IEEE trans.,Vol.PAS-101,pp.1894-1898, July 1982.
[13] F.P. deMello and C. Corcordia, “Concepta of Synchronous Machine Stability as Affected by Excitation control,” IEEE Trans., Vol. PAS-88, PP.316-329, April 1969.
Cite This Article
  • APA Style

    Pushpalata Khalkho, Arvind Kumar Singh. (2014). Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. American Journal of Electrical Power and Energy Systems, 3(2), 45-49. https://doi.org/10.11648/j.epes.20140302.15

    Copy | Download

    ACS Style

    Pushpalata Khalkho; Arvind Kumar Singh. Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. Am. J. Electr. Power Energy Syst. 2014, 3(2), 45-49. doi: 10.11648/j.epes.20140302.15

    Copy | Download

    AMA Style

    Pushpalata Khalkho, Arvind Kumar Singh. Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine. Am J Electr Power Energy Syst. 2014;3(2):45-49. doi: 10.11648/j.epes.20140302.15

    Copy | Download

  • @article{10.11648/j.epes.20140302.15,
      author = {Pushpalata Khalkho and Arvind Kumar Singh},
      title = {Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine},
      journal = {American Journal of Electrical Power and Energy Systems},
      volume = {3},
      number = {2},
      pages = {45-49},
      doi = {10.11648/j.epes.20140302.15},
      url = {https://doi.org/10.11648/j.epes.20140302.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20140302.15},
      abstract = {The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Transient Stability Improvement by Using PSS and Increasing Inertia of Synchronous Machine
    AU  - Pushpalata Khalkho
    AU  - Arvind Kumar Singh
    Y1  - 2014/04/20
    PY  - 2014
    N1  - https://doi.org/10.11648/j.epes.20140302.15
    DO  - 10.11648/j.epes.20140302.15
    T2  - American Journal of Electrical Power and Energy Systems
    JF  - American Journal of Electrical Power and Energy Systems
    JO  - American Journal of Electrical Power and Energy Systems
    SP  - 45
    EP  - 49
    PB  - Science Publishing Group
    SN  - 2326-9200
    UR  - https://doi.org/10.11648/j.epes.20140302.15
    AB  - The main objective of this paper is to perform transient stability analysis using the electrical power system design and analysis software namely E-Tap. The purpose of performing transient stability on the power system is to study the stability of a system under various disturbances. The stability of the power system is the ability of generators to remain in synchronization even when subjected to disturbance. In this paper a 9-bus test system is considered fig.(1). Improvement of transient stability by coordination of PSS (Power System Stabilizer) and increasing inertia of synchronous machine has been observed
    VL  - 3
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Electrical Engg. Deptt. B.I.T Sindri, Dhanbad, Govt. of Jharkhand-828123, India

  • Electrical Engg. Deptt. B.I.T Sindri, Dhanbad, Govt. of Jharkhand-828123, India

  • Sections