| Peer-Reviewed

Dynamic Active Power Control in Mosul City Ring System Using ESTATCOM

Received: 11 June 2013     Published: 20 August 2013
Views:       Downloads:
Abstract

Static synchronous compensation (STATCOM) is an application that utilizes a voltage source converter (VSC) to provide instantaneous reactive power support to the connected power system. Conventionally, STATCOMs are employed for reactive power support only. However, with the integration of energy storage (ES) into a STATCOM, it can provide active power support in addition to the reactive power support. The control method of a STATCOM with an energy storage device is discussed in this paper. To determine the switching level control, SPWM (Sinusoidal Pulse Width Modulation) methods is used. This paper will introduce an integrated STATCOM/BESS for the improvement of dynamic and transient stability and transmission capability. This work suggests a simple and easy to implement PI controller to control the operation of ESTATCOM placed at the weak point of Mosul city 132 kV ring system. The whole system including the ESTATCOM and its controller has been simulated after some kinds of disturbances and the results show improvements in the dynamic active and reactive power capabilities of the system.

Published in American Journal of Electrical Power and Energy Systems (Volume 2, Issue 5)
DOI 10.11648/j.epes.20130205.12
Page(s) 116-122
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

ESTATCOM, Active Power Control, Dynamic Active and Reactive Power Capabilities, Battery Energy Storage

References
[1] Dr. Dhiya A. Al-Nimma, Dr. Majed S. M. Al-Hafid and Saad Enad Mohamed "Voltage Profile Improvements of Mosul City Ring System by STATCOM Reactive Power Control", Acemp – Electromotion 2011, 8 – 10 September 2011 Istanbul – Turkey.
[2] Dhiya A. Al-Nimma, Majed S. M. Al-Hafid and Saad Enad Mohamed "Simultaneous Active and Reactive Power Control of ESTATCOM for Improving Mosul City Ring System" The First National Conference for Engineering cience, Baghdad-Iraq, 7-8 Nov. 2012.
[3] Majed S. M. Al-Hafid "Simulation of a Static Synchronous Compensator in the 132 KV Mosul Ring System" a PHD Thesis , University of Mosul - Iraq, 2006.
[4] R. Kuiava, R. A. Ramos and N. G. Bretas, "Control Design of a STATCOM with Energy Storage System for Stability and Power Quality Improvements," IEEE International Conference on Industrial Object Identifier, 2009.
[5] Vasudeo B. Virulkar and Mohan V. Aware, "Modeling and Control of DSTATCOM with BESS for Mitigation of Flicker, " Asian Power Electronics Journal, Vol. 4 No.1 April 2010.
[6] B. Singh and R. Saha, "A New 24-Pulse STATCOM for Voltage Regulation," International Conference on Power Electron. Drives and Energy Systems, 2006. PEDES '06, 12-15 Dec. 06, pp. 1-5.
[7] Alper Çetin and Muammer Ermi¸s, Member, IEEE, "VSC-Based D-STATCOM With Selective Harmonic Elimination," IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 45, NO. 3, MAY/JUNE 2009.
Cite This Article
  • APA Style

    Dhiya A. Al-Nimma, Majid S. M. Al-Hafidh, Saad Enad Mohamed. (2013). Dynamic Active Power Control in Mosul City Ring System Using ESTATCOM. American Journal of Electrical Power and Energy Systems, 2(5), 116-122. https://doi.org/10.11648/j.epes.20130205.12

    Copy | Download

    ACS Style

    Dhiya A. Al-Nimma; Majid S. M. Al-Hafidh; Saad Enad Mohamed. Dynamic Active Power Control in Mosul City Ring System Using ESTATCOM. Am. J. Electr. Power Energy Syst. 2013, 2(5), 116-122. doi: 10.11648/j.epes.20130205.12

    Copy | Download

    AMA Style

    Dhiya A. Al-Nimma, Majid S. M. Al-Hafidh, Saad Enad Mohamed. Dynamic Active Power Control in Mosul City Ring System Using ESTATCOM. Am J Electr Power Energy Syst. 2013;2(5):116-122. doi: 10.11648/j.epes.20130205.12

    Copy | Download

  • @article{10.11648/j.epes.20130205.12,
      author = {Dhiya A. Al-Nimma and Majid S. M. Al-Hafidh and Saad Enad Mohamed},
      title = {Dynamic Active Power Control in Mosul City Ring System Using ESTATCOM},
      journal = {American Journal of Electrical Power and Energy Systems},
      volume = {2},
      number = {5},
      pages = {116-122},
      doi = {10.11648/j.epes.20130205.12},
      url = {https://doi.org/10.11648/j.epes.20130205.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20130205.12},
      abstract = {Static synchronous compensation (STATCOM) is an application that utilizes a voltage source converter (VSC) to provide instantaneous reactive power support to the connected power system. Conventionally, STATCOMs are employed for reactive power support only. However, with the integration of energy storage (ES) into a STATCOM, it can provide active power support in addition to the reactive power support. The control method of a STATCOM with an energy storage device is discussed in this paper. To determine the switching level control, SPWM (Sinusoidal Pulse Width Modulation) methods is used. This paper will introduce an integrated STATCOM/BESS for the improvement of dynamic and transient stability and transmission capability. This work suggests a simple and easy to implement PI controller to control the operation of ESTATCOM placed at the weak point of Mosul city 132 kV ring system. The whole system including the ESTATCOM and its controller has been simulated after some kinds of disturbances and the results show improvements in the dynamic active and reactive power capabilities of the system.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Dynamic Active Power Control in Mosul City Ring System Using ESTATCOM
    AU  - Dhiya A. Al-Nimma
    AU  - Majid S. M. Al-Hafidh
    AU  - Saad Enad Mohamed
    Y1  - 2013/08/20
    PY  - 2013
    N1  - https://doi.org/10.11648/j.epes.20130205.12
    DO  - 10.11648/j.epes.20130205.12
    T2  - American Journal of Electrical Power and Energy Systems
    JF  - American Journal of Electrical Power and Energy Systems
    JO  - American Journal of Electrical Power and Energy Systems
    SP  - 116
    EP  - 122
    PB  - Science Publishing Group
    SN  - 2326-9200
    UR  - https://doi.org/10.11648/j.epes.20130205.12
    AB  - Static synchronous compensation (STATCOM) is an application that utilizes a voltage source converter (VSC) to provide instantaneous reactive power support to the connected power system. Conventionally, STATCOMs are employed for reactive power support only. However, with the integration of energy storage (ES) into a STATCOM, it can provide active power support in addition to the reactive power support. The control method of a STATCOM with an energy storage device is discussed in this paper. To determine the switching level control, SPWM (Sinusoidal Pulse Width Modulation) methods is used. This paper will introduce an integrated STATCOM/BESS for the improvement of dynamic and transient stability and transmission capability. This work suggests a simple and easy to implement PI controller to control the operation of ESTATCOM placed at the weak point of Mosul city 132 kV ring system. The whole system including the ESTATCOM and its controller has been simulated after some kinds of disturbances and the results show improvements in the dynamic active and reactive power capabilities of the system.
    VL  - 2
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Electrical Engineering Department, University of Mosul, Mosul- IRAQ

  • Electrical Engineering Department, University of Mosul, Mosul- IRAQ

  • Electrical Engineering Department, University of Mosul, Mosul- IRAQ

  • Sections