RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation

Md Mostafizur Rahman Komol; Amit Kumer Podder; Md Nesar Ali; Shariar Mohammed Ansary

doi:doi:10.11648/j.ajesa.20180601.13

| Peer-Reviewed

RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation

Md Mostafizur Rahman Komol, Amit Kumer Podder, Md Nesar Ali, Shariar Mohammed Ansary

Published in American Journal of Embedded Systems and Applications (Volume 6, Issue 1)

Received: 26 April 2018 Accepted: 16 May 2018 Published: 15 June 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper focuses on research works of control engineering field and aims at impenetrable security system especially in case of medication, jewelry, documents & others valuable items and mandatorily in the higher intelligence agency. Here, a developed security system with automatic sensing is introduced by the use of both Radio frequency identification (RFID) card tagging system and fingerprint sensing biometric security system to maintain the valid access of a person to a secured place. RFID reader and fingerprint sensing device work as a locker of the security and RFID tag and a validly ratified finger is considered as the key of the locker. In case of access granted entity, door bar gets opened with a servo mechanism system connected with door bar. On the contrary, no action is taken as cavalcade if the entity is considered invalid in the sensing system. These knock out the necessity for keeping track of keys or remembering a combination of password or pin. A prototype of the security system is also designed and the performance of it is tested. The satisfactory results of its performance show the validity of the system and indicate a better solution for the future security system.

Published in	American Journal of Embedded Systems and Applications (Volume 6, Issue 1)
DOI	10.11648/j.ajesa.20180601.13
Page(s)	15-22
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

RFID, Fingerprint Sensor, Extract Minutiae, Servomotor, Strenuous Security, Automation, Door Control

References

[1]	J. Baidya, T. Saha, R. Moyashir and R. Palit, “Design and implementation of a fingerprint based lock system for shared access,” 2017 IEEE 7th Annual Computing and Communication Workshop and Conference (CCWC), Las Vegas, NV, 2017, pp. 1-6.
[2]	U. Farooq, M. Hasan, M. Amar, A. Hanif, and M. U. Asad, “RFID based security and access control system”, in International Journal of Engineering and Technology, Vol. 6, No. 4, August, 2014, pp. 309–314.
[3]	L. Wu, W. W. Y. Ng, D. S. Yeung and H. L. Ding, “A brief survey on current RFID applications,” Proc. in International Conference on Machine Learning and Cybernetics, Baoding, 2009, pp. 2330-2335.
[4]	Yu-Chih Huang, “Secure access control scheme of RFID system application” in Proc. Fifth International Conference on Information Assurance and Security, China, 2009.
[5]	A. Juels, “RFID security and privacy: A Research survey, selected areas in communications”, IEEE Journal on Publication, Volume: 24, Issue: 2, Feb. 2006, pp. 381-394.
[6]	I. Yugashini, S. Vidhyasri, K. Gayathri Devi, “Design and implementation of automated door accessing system with face recognition”, International Journal of Science and Modern Engineering (IJISME) ISSN: 2319-6386, Vol. 1, Issue-12, November 2013.
[7]	O. Omidiora, O. A Fakolujo, O. T. Arulogun, D. O. Aborisade, “A prototype of a fingerprint based ignition systems in vehicles”, in European Journal of Scientific Research, Vol. 62, Issue 2, October, 2011, pp. 164.
[8]	A. Kawale, "Fingerprint based locking system" in International Journal of Scientific & Engineering Research, Vol. 4, Issue 5, May-2013.
[9]	R. P. Wildes. “Iris recognition: an emerging biometric technology”, Proceedings of the IEEE, vol. 85, no. 9, September, 1997, pp. 1348-1363.
[10]	X. L. Meng, Z. W. Song, and X. Y. Li, “RFID-Based security authentication system based on a novel face-recognition structure,” in Proc. WASE International Conference on Information Engineering, 2010, pp. 97-100.
[11]	D. L. Wu, W. W. Y. Ng, P. P. K. Chan, H. L. Ding, B. Z. Jing and D. S. Yeung, "Access control by RFID and face recognition based on neural network," Proc. in International Conference on Machine Learning and Cybernetics, Qingdao, 2010, pp. 675-680.
[12]	L. H. Thai, H. N. Tam, “Fingerprint recognition using standardized fingerprint model” in International Journal of Computer Science Issues, Vol. 7, Issue 3, No 7, May 2010.
[13]	T. Vanhuy, D. T. Minh, N. P. Kien, T. A. Vu, “Simple robotic hand in motion using arduino controlled servos”, in International Journal of Science and Research (IJSR), Vol. 6, Issue 3, March, 2017, pp. 972-975.
[14]	S. L. Ting, S. K. Kwok, A. H. C. Tsang and G. T. S. Ho, “The Study on using passive RFID tags for indoor positioning tagged objects”, in International Journal of Engineering Business Management, Volume: 3, January 1, 2011, pp. 9-16.
[15]	M. Wang, J. Pan, “Authentication test-based the RFID authentication protocol with security analysis”, Sensors & Transducers IFSA Publishing, S. L., Vol. 176, Issue 8, August 2014, pp. 196-202.
[16]	N. K. Ratha, J. H. Connell, R. M. Bolle, “Secure data hyding in wavelet compressed fingerprint images”, ACM Multimedia workshop Marina Del Rey CA USA, 2000.
[17]	A. Nagar, K. Nandakumar, A. K. Jain, “A hybrid biometric crypto system for securing fingerprint mutiae templates”, Pattern recognition Letters, Vol. 31, 2010, pp. 733-741.
[18]	A. Farina, Z. M. Kovács-Vajna and A. Leone, “Fingerprint minutiae xtraction from skeletonized binary images,” Journal of the pattern recognition society, Vol. 32, Issue 5, Bologna Italy 1999, pp. 877-889.
[19]	A. K. Jain, S. Prabhakar, L. Hong and S. Pankanti, "Filterbank-based fingerprint matching," in IEEE Transactions on Image Processing, vol. 9, no. 5, pp. 846-859, May 2000.
[20]	F. L. Podio, “Personal authentication through biometric technologies”, in Proc. 2002 IEEE 4th International Workshop on Networked Appliances (Cat. No. 02EX525), Gaithersburg, MD, 2002, pp. 57-66.
[21]	L. M. Mwaringa and T. Biketi. “Finger print based automotive security lock system.”, 2016 Annual Conference on Sustainable Research and Innovation, 4 - 6 May 2016, pp. 295-298.
[22]	M. M. H. Ali, V. H. Mahale, P. Yannawar and A. T. Gaikwad, "Overview of fingerprint recognition system," 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), Chennai, 2016, pp. 1334-1338.

Cite This Article

Plain Text BibTeX RIS

APA Style

Md Mostafizur Rahman Komol, Amit Kumer Podder, Md Nesar Ali, Shariar Mohammed Ansary. (2018). RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation. American Journal of Embedded Systems and Applications, 6(1), 15-22. https://doi.org/10.11648/j.ajesa.20180601.13

Copy | Download

ACS Style

Md Mostafizur Rahman Komol; Amit Kumer Podder; Md Nesar Ali; Shariar Mohammed Ansary. RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation. Am. J. Embed. Syst. Appl. 2018, 6(1), 15-22. doi: 10.11648/j.ajesa.20180601.13

Copy | Download

AMA Style

Md Mostafizur Rahman Komol, Amit Kumer Podder, Md Nesar Ali, Shariar Mohammed Ansary. RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation. Am J Embed Syst Appl. 2018;6(1):15-22. doi: 10.11648/j.ajesa.20180601.13

Copy | Download

@article{10.11648/j.ajesa.20180601.13,
  author = {Md Mostafizur Rahman Komol and Amit Kumer Podder and Md Nesar Ali and Shariar Mohammed Ansary},
  title = {RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation},
  journal = {American Journal of Embedded Systems and Applications},
  volume = {6},
  number = {1},
  pages = {15-22},
  doi = {10.11648/j.ajesa.20180601.13},
  url = {https://doi.org/10.11648/j.ajesa.20180601.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajesa.20180601.13},
  abstract = {This paper focuses on research works of control engineering field and aims at impenetrable security system especially in case of medication, jewelry, documents & others valuable items and mandatorily in the higher intelligence agency. Here, a developed security system with automatic sensing is introduced by the use of both Radio frequency identification (RFID) card tagging system and fingerprint sensing biometric security system to maintain the valid access of a person to a secured place. RFID reader and fingerprint sensing device work as a locker of the security and RFID tag and a validly ratified finger is considered as the key of the locker. In case of access granted entity, door bar gets opened with a servo mechanism system connected with door bar. On the contrary, no action is taken as cavalcade if the entity is considered invalid in the sensing system. These knock out the necessity for keeping track of keys or remembering a combination of password or pin. A prototype of the security system is also designed and the performance of it is tested. The satisfactory results of its performance show the validity of the system and indicate a better solution for the future security system.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation
AU  - Md Mostafizur Rahman Komol
AU  - Amit Kumer Podder
AU  - Md Nesar Ali
AU  - Shariar Mohammed Ansary
Y1  - 2018/06/15
PY  - 2018
N1  - https://doi.org/10.11648/j.ajesa.20180601.13
DO  - 10.11648/j.ajesa.20180601.13
T2  - American Journal of Embedded Systems and Applications
JF  - American Journal of Embedded Systems and Applications
JO  - American Journal of Embedded Systems and Applications
SP  - 15
EP  - 22
PB  - Science Publishing Group
SN  - 2376-6085
UR  - https://doi.org/10.11648/j.ajesa.20180601.13
AB  - This paper focuses on research works of control engineering field and aims at impenetrable security system especially in case of medication, jewelry, documents & others valuable items and mandatorily in the higher intelligence agency. Here, a developed security system with automatic sensing is introduced by the use of both Radio frequency identification (RFID) card tagging system and fingerprint sensing biometric security system to maintain the valid access of a person to a secured place. RFID reader and fingerprint sensing device work as a locker of the security and RFID tag and a validly ratified finger is considered as the key of the locker. In case of access granted entity, door bar gets opened with a servo mechanism system connected with door bar. On the contrary, no action is taken as cavalcade if the entity is considered invalid in the sensing system. These knock out the necessity for keeping track of keys or remembering a combination of password or pin. A prototype of the security system is also designed and the performance of it is tested. The satisfactory results of its performance show the validity of the system and indicate a better solution for the future security system.
VL  - 6
IS  - 1
ER  -

Copy | Download

Author Information

Md Mostafizur Rahman Komol

Department of Mechanical Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh
Amit Kumer Podder

Department of Electrical and Electronic Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh
Md Nesar Ali

Department of Mechanical Engineering, Chittagong University of Engineering and Technology, Chittagong, Bangladesh
Shariar Mohammed Ansary

Department of Mechanical Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Md Mostafizur Rahman Komol, Amit Kumer Podder, Md Nesar Ali, Shariar Mohammed Ansary. (2018). RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation. American Journal of Embedded Systems and Applications, 6(1), 15-22. https://doi.org/10.11648/j.ajesa.20180601.13

Copy | Download

ACS Style

Md Mostafizur Rahman Komol; Amit Kumer Podder; Md Nesar Ali; Shariar Mohammed Ansary. RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation. Am. J. Embed. Syst. Appl. 2018, 6(1), 15-22. doi: 10.11648/j.ajesa.20180601.13

Copy | Download

AMA Style

Md Mostafizur Rahman Komol, Amit Kumer Podder, Md Nesar Ali, Shariar Mohammed Ansary. RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation. Am J Embed Syst Appl. 2018;6(1):15-22. doi: 10.11648/j.ajesa.20180601.13

Copy | Download

@article{10.11648/j.ajesa.20180601.13,
  author = {Md Mostafizur Rahman Komol and Amit Kumer Podder and Md Nesar Ali and Shariar Mohammed Ansary},
  title = {RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation},
  journal = {American Journal of Embedded Systems and Applications},
  volume = {6},
  number = {1},
  pages = {15-22},
  doi = {10.11648/j.ajesa.20180601.13},
  url = {https://doi.org/10.11648/j.ajesa.20180601.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajesa.20180601.13},
  abstract = {This paper focuses on research works of control engineering field and aims at impenetrable security system especially in case of medication, jewelry, documents & others valuable items and mandatorily in the higher intelligence agency. Here, a developed security system with automatic sensing is introduced by the use of both Radio frequency identification (RFID) card tagging system and fingerprint sensing biometric security system to maintain the valid access of a person to a secured place. RFID reader and fingerprint sensing device work as a locker of the security and RFID tag and a validly ratified finger is considered as the key of the locker. In case of access granted entity, door bar gets opened with a servo mechanism system connected with door bar. On the contrary, no action is taken as cavalcade if the entity is considered invalid in the sensing system. These knock out the necessity for keeping track of keys or remembering a combination of password or pin. A prototype of the security system is also designed and the performance of it is tested. The satisfactory results of its performance show the validity of the system and indicate a better solution for the future security system.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - RFID and Finger Print Based Dual Security System: A Robust Secured Control to Access Through Door Lock Operation
AU  - Md Mostafizur Rahman Komol
AU  - Amit Kumer Podder
AU  - Md Nesar Ali
AU  - Shariar Mohammed Ansary
Y1  - 2018/06/15
PY  - 2018
N1  - https://doi.org/10.11648/j.ajesa.20180601.13
DO  - 10.11648/j.ajesa.20180601.13
T2  - American Journal of Embedded Systems and Applications
JF  - American Journal of Embedded Systems and Applications
JO  - American Journal of Embedded Systems and Applications
SP  - 15
EP  - 22
PB  - Science Publishing Group
SN  - 2376-6085
UR  - https://doi.org/10.11648/j.ajesa.20180601.13
AB  - This paper focuses on research works of control engineering field and aims at impenetrable security system especially in case of medication, jewelry, documents & others valuable items and mandatorily in the higher intelligence agency. Here, a developed security system with automatic sensing is introduced by the use of both Radio frequency identification (RFID) card tagging system and fingerprint sensing biometric security system to maintain the valid access of a person to a secured place. RFID reader and fingerprint sensing device work as a locker of the security and RFID tag and a validly ratified finger is considered as the key of the locker. In case of access granted entity, door bar gets opened with a servo mechanism system connected with door bar. On the contrary, no action is taken as cavalcade if the entity is considered invalid in the sensing system. These knock out the necessity for keeping track of keys or remembering a combination of password or pin. A prototype of the security system is also designed and the performance of it is tested. The satisfactory results of its performance show the validity of the system and indicate a better solution for the future security system.
VL  - 6
IS  - 1
ER  -

Copy | Download