| Peer-Reviewed

Study the Effect of Different Parameters and Improving the Shielding Effectiveness of a Metallic Enclosure with Extra Wall

Received: 21 April 2019     Accepted: 23 July 2019     Published: 14 August 2019
Views:       Downloads:
Abstract

This paper propose a new method for improving shielding effectiveness (SE) of a rectangular enclosure with multiple circular apertures. In this method in order to compensate the effects of the apertures on (SE) parameter, we use two metallic walls each containing apertures instead of the one wall. By using two walls for shielding an enclosure, the shielding effectiveness of the enclosure will improve. The numerical simulation uses a symmetric condensed node of TLM – TD (Transmission line Modeling Method – Time Domain) and subsequent Fourier Transform and the result was verified by HFSS and CST software. We obtain the shielding effectiveness response to an electric field impulsive excitation. It is shown that field polarization and enclosure direction has a noticeable effect on SE that should be considered in SE calculations. The effect of different parameters and improving the shielding effectiveness of a metallic enclosure with extra wall is studied. An optimization of the influence of the place of apertures in the walls and the diameter of circles on two walls is presented.

Published in American Journal of Electrical and Computer Engineering (Volume 3, Issue 2)
DOI 10.11648/j.ajece.20190302.11
Page(s) 53-57
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Shielding Effectiveness, EMC, TLM, Extra Shielding Wall

References
[1] G. Cerri, R. D. Leo, V. M. Primiani, and M. Righetti, “Field penetration into metallic enclosures through slots excited by ESD,” IEEE Trans. Electromagnetic Compatibility, Vol. EMC-36, No. 2, pp. 110-1 16, May. 1999.
[2] G. Cerri, R. D. Leo and V. M. Primiani, “Theoretical and experimental evaluation of the electromagnetic radiation from apertures in shielded enclosures,” IEEE Trans Electromagnetic Compatibility., Vol. EMC-34, No. 4, pp. 423-432, November 1992.
[3] M. Edrisi and W. K. Chan, “EMC methodology for numerical electric field computation inside enclosure with aperture,” Electronics Letters, Vol. 35, pp. 1233- 1235, 1999.
[4] A. R Attari, K. Barkeshli, “Application of the Transmission Line Matrix Method to the Calculation of the Shielding Effectiveness for Metallic Enclosures,” Palais des congrès Acropolis, France, November12-14, 2002.
[5] M. Bahadorzadeh, M. Naser. Moghaddasi, “Improving the shielding effectiveness of a rectangular metallic enclosure with aperture by using extra shielding wall,” IEEE Trans. Montreal, QC, July 2006.
[6] J. L. SiIveiraP, S. Benhassine', L. Pichon' and A. Raizer, ” Analysis of the shielding effectiveness of a rectangular enclosure with apertures by TLM-TD,” Fourth International Conference on Computation in Electromagnetics (CEM 2002), 8-11 APRIL 2002, BOURNEMOUTH, UK.
[7] M. Bahadorzadeh, A. A. Lotfi-Neyestanak "A novel and efficient technique for improving shielding effectiveness of a rectangular enclosure using optimized aperture load Authors" Journal Elektronika ir Elektrotechnika, Volume 18, Issue 10, Pages 89-92.
[8] A. Shourvarzi, and M. Joodaki, “A network of ports to estimate shielding effectiveness of an enclosure with apertures,” in Proc. Electromagn. Compat. Eur., 2016, pp. 626–630.
[9] A. Shourvarzi, and M. Joodaki, “Using Aperture Impedance for Shielding Effectiveness Estimation of a Metallic Enclosure with Multiple Apertures on Different Walls Considering Higher Order Modes,” IEEE Trans. Electromagnetic Compatibility, vol. PP, issue: 99, 2017.
[10] A. Shourvarzi, and M. Joodaki, “Shielding effectiveness estimation of an enclosure with an arbitrary shape aperture”, EMC Europe 2017.
[11] Nie, B. L. and P. A. Du, “An efficient and reliable circuit model for the shielding effectiveness prediction of an enclosure with an aperture,” IEEE Transactions on Electromagnetic Compatibility, Vol. 57, No. 3, 357–364, 2015.
[12] Yin, M. C. and P. A. Du, “An improved circuit model for the prediction of the shielding effectiveness and resonances of an enclosure with apertures,” IEEE Transactions on Electromagnetic Compatibility, Vol. 58, No. 2, 448–456, 2016.
[13] Dehkhoda, P., A. Tavakoli, and M. Azadifar, “Shielding effectiveness of an enclosure with finite wall thickness and perforated opposing walls at oblique incidence and arbitrary polarization by GMMoM,” IEEE Transactions on Electromagnetic Compatibility, Vol. 54, No. 4, 792–805, 2012.
[14] S. Celozzi, R. Araneo, G. Lovat, Electromagnetic shielding, Hoboken, New Jersey: Wiley & Sons, pp. 42-46, 2008.
[15] M. P. Robinson, T. M. Benson, C. Christopoulos, J. F. Dawson, M. D. Ganley, A. C. Marvin, S. J. Porter, D. W. P. Thomas, "Analytical formulation for the shielding effectiveness of enclosures with apertures", IEEE Trans. Electromagn. Compat., vol. 40, no. 3, pp. 240-248, Aug. 1998.
Cite This Article
  • APA Style

    Sedigheh Vaezikakhki, Seyed Saeid Mosavinejad, Mehdi Bahadorzadeh. (2019). Study the Effect of Different Parameters and Improving the Shielding Effectiveness of a Metallic Enclosure with Extra Wall. American Journal of Electrical and Computer Engineering, 3(2), 53-57. https://doi.org/10.11648/j.ajece.20190302.11

    Copy | Download

    ACS Style

    Sedigheh Vaezikakhki; Seyed Saeid Mosavinejad; Mehdi Bahadorzadeh. Study the Effect of Different Parameters and Improving the Shielding Effectiveness of a Metallic Enclosure with Extra Wall. Am. J. Electr. Comput. Eng. 2019, 3(2), 53-57. doi: 10.11648/j.ajece.20190302.11

    Copy | Download

    AMA Style

    Sedigheh Vaezikakhki, Seyed Saeid Mosavinejad, Mehdi Bahadorzadeh. Study the Effect of Different Parameters and Improving the Shielding Effectiveness of a Metallic Enclosure with Extra Wall. Am J Electr Comput Eng. 2019;3(2):53-57. doi: 10.11648/j.ajece.20190302.11

    Copy | Download

  • @article{10.11648/j.ajece.20190302.11,
      author = {Sedigheh Vaezikakhki and Seyed Saeid Mosavinejad and Mehdi Bahadorzadeh},
      title = {Study the Effect of Different Parameters and Improving the Shielding Effectiveness of a Metallic Enclosure with Extra Wall},
      journal = {American Journal of Electrical and Computer Engineering},
      volume = {3},
      number = {2},
      pages = {53-57},
      doi = {10.11648/j.ajece.20190302.11},
      url = {https://doi.org/10.11648/j.ajece.20190302.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajece.20190302.11},
      abstract = {This paper propose a new method for improving shielding effectiveness (SE) of a rectangular enclosure with multiple circular apertures. In this method in order to compensate the effects of the apertures on (SE) parameter, we use two metallic walls each containing apertures instead of the one wall. By using two walls for shielding an enclosure, the shielding effectiveness of the enclosure will improve. The numerical simulation uses a symmetric condensed node of TLM – TD (Transmission line Modeling Method – Time Domain) and subsequent Fourier Transform and the result was verified by HFSS and CST software. We obtain the shielding effectiveness response to an electric field impulsive excitation. It is shown that field polarization and enclosure direction has a noticeable effect on SE that should be considered in SE calculations. The effect of different parameters and improving the shielding effectiveness of a metallic enclosure with extra wall is studied. An optimization of the influence of the place of apertures in the walls and the diameter of circles on two walls is presented.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Study the Effect of Different Parameters and Improving the Shielding Effectiveness of a Metallic Enclosure with Extra Wall
    AU  - Sedigheh Vaezikakhki
    AU  - Seyed Saeid Mosavinejad
    AU  - Mehdi Bahadorzadeh
    Y1  - 2019/08/14
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ajece.20190302.11
    DO  - 10.11648/j.ajece.20190302.11
    T2  - American Journal of Electrical and Computer Engineering
    JF  - American Journal of Electrical and Computer Engineering
    JO  - American Journal of Electrical and Computer Engineering
    SP  - 53
    EP  - 57
    PB  - Science Publishing Group
    SN  - 2640-0502
    UR  - https://doi.org/10.11648/j.ajece.20190302.11
    AB  - This paper propose a new method for improving shielding effectiveness (SE) of a rectangular enclosure with multiple circular apertures. In this method in order to compensate the effects of the apertures on (SE) parameter, we use two metallic walls each containing apertures instead of the one wall. By using two walls for shielding an enclosure, the shielding effectiveness of the enclosure will improve. The numerical simulation uses a symmetric condensed node of TLM – TD (Transmission line Modeling Method – Time Domain) and subsequent Fourier Transform and the result was verified by HFSS and CST software. We obtain the shielding effectiveness response to an electric field impulsive excitation. It is shown that field polarization and enclosure direction has a noticeable effect on SE that should be considered in SE calculations. The effect of different parameters and improving the shielding effectiveness of a metallic enclosure with extra wall is studied. An optimization of the influence of the place of apertures in the walls and the diameter of circles on two walls is presented.
    VL  - 3
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Faculty of Engineering, Islamic Azad University, Mashhad, Iran

  • Faculty of Engineering, Islamic Azad University, Mashhad, Iran

  • Faculty of Engineering, Islamic Azad University, Mashhad, Iran

  • Sections