| Peer-Reviewed

Model for Vertical Hyperthermic Temperature Gradient Distribution in Concrete Box Girder in China

Received: 1 May 2020     Accepted: 15 May 2020     Published: 18 May 2020
Views:       Downloads:
Abstract

The temperature field of concrete box girder under sunshine is an important factor to be considered in the design of bridge superstructure. Based on the meteorological parameters and the semi-empirical formula given by related bridge specifications, the vertical temperature gradient distribution model of prestressed concrete box girder was established using SPSS software. The amplitude of the temperature gradient model is calculated according to the theory of statistics. The index function model considering wind speed, solar radiation and temperature variation was obtained, and the method to determine the amplitude of vertical temperature gradient was summarized according to different building climate zones in China. The applicable conditions of the model are as follows: sunny and cloudless days with high radiation quantity should be selected; The selected months are generally from May to July, and June in extremely cold regions. It is verified that the calculated value fits well with the measured value by monitoring data of 3 real Bridges in different zones. The model of temperature gradient heating in warm areas was calculated. For the temperate climate regions without real bridge measured data, the recommended value of temperature gradient amplitude in this region is given after trial calculation. It explores the method of using only meteorological data without surveying and mapping, which can save a lot of manpower and material resources.

Published in American Journal of Civil Engineering (Volume 8, Issue 3)
DOI 10.11648/j.ajce.20200803.11
Page(s) 48-56
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Temperature Gradient, Concrete Box Girder, Building Climate Demarcation, Meteorological Factors

References
[1] B. Hunt and N. Cooke (1975). “Thermal Calculations for Bridge Design,” Journal of the Structural Division, 176-178.
[2] Wang J. F., Zhang J. T., Yang A. X. and Xu R. Q. (2020). “Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges,” Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 21 (4), 255-267.
[3] Zhao R. D., Wang Y. B. (2016). “Studies on Temperature Field Boundary Conditions for Concrete Box-Girder Bridges Under Solar Radiation,” China Journal of Highway and Transport, 29 (7), 52-61.
[4] Zhang L. L., Wu L. Q., Yang L. (2012) “Analysis of Temperature Field Of Concrete Box Girder And Secondary Development Of Program,” Journal of Convergence Information Technology, 7 (5), 254-262.
[5] Jiang C. R., Ren, J. M. and Wang, Z. L. (2013). “Research of Temperature Field of Long Span Concrete Box Girder Bridge Caused by Solar Radiation,” Applied Mechanics and Materials, 256-259 (PART 1), 1635-1639
[6] Liu X. F. (1985). “Temperature distribution of concrete bridge,” Journal Railway Engineering Society, 107-111.
[7] Zhang, Y., Hu, Z. T., Jia, R. Z. (2006). “Temperature Gradient of Reinforced Concrete Continuous Curved Box Girder Bridge,” Journal Chang’an University, 26 (7), 58-62.
[8] Nie Y. D. (2013). “Analysis of temperature field and temperature effect for long span concrete box girder bridges in cold regions,” Doctoral Dissertation of Harbin Institute of Technology, 66-70.
[9] L. Roberis-Wollman, C. Cawrse, E Breen J. (2002). “Measurement of Thermal Gradients and Their Effects on Segmental Concrete Bridge,” Journal of Structural Engineering, 3 (7), 166-174.
[10] N. Li D., A. Maes M. and H. Dilger (2008). “Evaluation of Temperature Data of Confederation Bridge: Thermal Loadingand Movement at Expansion Joint,” Proceeding of The ASCE: Structure Congress, 1 (120), 314-324.
[11] Liu J., Liu Y. J., Bai, Y. X. and Liu G. L. (2020). “Regional Variation and Zoning of Temperature Gradient Pattern of Concrete Box Girder,” China Journal of Highway Transportation. 33 (3), 73-84.
[12] Li G. Q., Wang C. A., Ye F. and Chen S. W. (2019). “Research on Temperature Field and Thermal Deformation of Steel Box Maglev Guideway Caused by Solar Radiation,” China Civil Engineering Journal. 52 (11), 45-55.
[13] Sheng C. and Yu T. L. (2008). “Research and Temperature Effects on Continuous Rigid Frame Box Beam Bridge,” Forest Engineering. 24 (5), 49-96.
[14] Cui X. Q., Feng. R. and Huang Y. (2010) “Study on Temperature Field of Concrete Box Girder Bridge by Solar Radiation,” Concrete, 6, 37-40.
[15] Li H. J., Li, Z. and Wang Y. J., etc.(2005) “Research on Temperature Gradient of Concrete Box Girder of Continuous Rigid-Frame Bridge Named Aids to Navigation Bridge in Town Humen, Guangdong Province.” Journal Highway and Transportation Research and Development, 22 (5), 67-70.
[16] China Meteorological Data Sharing Service System. (2009). “Daily value data sets of China radiation international exchange station” and “Daily value data sets of climatic resources of Chinese ground international exchange station”. http://cdc.cma.gov.cn.
Cite This Article
  • APA Style

    Ziying Liu, Tianlai Yu. (2020). Model for Vertical Hyperthermic Temperature Gradient Distribution in Concrete Box Girder in China. American Journal of Civil Engineering, 8(3), 48-56. https://doi.org/10.11648/j.ajce.20200803.11

    Copy | Download

    ACS Style

    Ziying Liu; Tianlai Yu. Model for Vertical Hyperthermic Temperature Gradient Distribution in Concrete Box Girder in China. Am. J. Civ. Eng. 2020, 8(3), 48-56. doi: 10.11648/j.ajce.20200803.11

    Copy | Download

    AMA Style

    Ziying Liu, Tianlai Yu. Model for Vertical Hyperthermic Temperature Gradient Distribution in Concrete Box Girder in China. Am J Civ Eng. 2020;8(3):48-56. doi: 10.11648/j.ajce.20200803.11

    Copy | Download

  • @article{10.11648/j.ajce.20200803.11,
      author = {Ziying Liu and Tianlai Yu},
      title = {Model for Vertical Hyperthermic Temperature Gradient Distribution in Concrete Box Girder in China},
      journal = {American Journal of Civil Engineering},
      volume = {8},
      number = {3},
      pages = {48-56},
      doi = {10.11648/j.ajce.20200803.11},
      url = {https://doi.org/10.11648/j.ajce.20200803.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajce.20200803.11},
      abstract = {The temperature field of concrete box girder under sunshine is an important factor to be considered in the design of bridge superstructure. Based on the meteorological parameters and the semi-empirical formula given by related bridge specifications, the vertical temperature gradient distribution model of prestressed concrete box girder was established using SPSS software. The amplitude of the temperature gradient model is calculated according to the theory of statistics. The index function model considering wind speed, solar radiation and temperature variation was obtained, and the method to determine the amplitude of vertical temperature gradient was summarized according to different building climate zones in China. The applicable conditions of the model are as follows: sunny and cloudless days with high radiation quantity should be selected; The selected months are generally from May to July, and June in extremely cold regions. It is verified that the calculated value fits well with the measured value by monitoring data of 3 real Bridges in different zones. The model of temperature gradient heating in warm areas was calculated. For the temperate climate regions without real bridge measured data, the recommended value of temperature gradient amplitude in this region is given after trial calculation. It explores the method of using only meteorological data without surveying and mapping, which can save a lot of manpower and material resources.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Model for Vertical Hyperthermic Temperature Gradient Distribution in Concrete Box Girder in China
    AU  - Ziying Liu
    AU  - Tianlai Yu
    Y1  - 2020/05/18
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ajce.20200803.11
    DO  - 10.11648/j.ajce.20200803.11
    T2  - American Journal of Civil Engineering
    JF  - American Journal of Civil Engineering
    JO  - American Journal of Civil Engineering
    SP  - 48
    EP  - 56
    PB  - Science Publishing Group
    SN  - 2330-8737
    UR  - https://doi.org/10.11648/j.ajce.20200803.11
    AB  - The temperature field of concrete box girder under sunshine is an important factor to be considered in the design of bridge superstructure. Based on the meteorological parameters and the semi-empirical formula given by related bridge specifications, the vertical temperature gradient distribution model of prestressed concrete box girder was established using SPSS software. The amplitude of the temperature gradient model is calculated according to the theory of statistics. The index function model considering wind speed, solar radiation and temperature variation was obtained, and the method to determine the amplitude of vertical temperature gradient was summarized according to different building climate zones in China. The applicable conditions of the model are as follows: sunny and cloudless days with high radiation quantity should be selected; The selected months are generally from May to July, and June in extremely cold regions. It is verified that the calculated value fits well with the measured value by monitoring data of 3 real Bridges in different zones. The model of temperature gradient heating in warm areas was calculated. For the temperate climate regions without real bridge measured data, the recommended value of temperature gradient amplitude in this region is given after trial calculation. It explores the method of using only meteorological data without surveying and mapping, which can save a lot of manpower and material resources.
    VL  - 8
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • College of Civil Engineering, Northeast Forestry University, Harbin, China

  • College of Civil Engineering, Northeast Forestry University, Harbin, China

  • Sections