| Peer-Reviewed

Finite Element Modeling and Analysis of Precast Reinforced Concrete U-Shaped Box Culvert Using ABAQUS

Received: 10 December 2018     Published: 11 December 2018
Views:       Downloads:
Abstract

This paper presents the finite element results of a parametric investigation of the U-shaped box culvert of prefabricated reinforced concrete subject to loading conditions. It was included outer size span length 4.80m, rise of 4.80m, laying width 1.5m and 0.4m slab and wall thickness. Its components consisted of two symmetrical u-shaped structures joined together using the tip at the end of the bell. It was not recommended for areas with excessive settlement where deep foundations were required. The upper and side ground pressure was considered in the culvert, which depends on the depth of the canal. The finite element method has been chosen for purpose of modeling and analyzing the structural behaver of the standard three dimensional solid and wire elements of the u-shaped box culvert under different loading conditions using ABAQUS-V6.14-4 due to its flexibility in creating geometry and material modeling. The culvert has been modeled using 3-D solid (C3D8R) elements reduce integration for concrete and 3-D wire (T3D2H) elements for reinforcement having geometric and material linearity as well as hybrid formulation. The reinforcement was modeled as rebar elements embedded in the surface element. Finally, the Finite element analysis (FEA) results were showed deflection and stress as well as effect of with and without distribution steel on the culvert.

Published in American Journal of Civil Engineering (Volume 6, Issue 5)
DOI 10.11648/j.ajce.20180605.14
Page(s) 162-166
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

ABAQUS, Box Culvert, FEA, FEM, Precast Concrete, Reinforced Concrete

References
[1] M. Ahmed Alia Osman and E. Alarabi, "Development Formulation for Structural Design of Concrete Box Culverts," Practice Periodical on Structural Design and Construction, vol. 16, pp. 48-55, 2011/05/01 2011.
[2] A. Abolmaali and K. Garg Anil, "Effect of Wheel Live Load on Shear Behavior of Precast Reinforced Concrete Box Culverts," Journal of Bridge Engineering, vol. 13, pp. 93-99, 2008/01/01 2008.
[3] F. S. o. Y. W. D. Yijie, "Development and Application Prospect of Precast Prestressed Concrete Box Culvert," China Concrete and Cement Products, 2016.
[4] P. Jianzhong, "Analysis on the structural design of the sluice cover box" Shandong Industrial Technology, 2018.
[5] K. Garg Anil, A. Abolmaali, and R. Fernandez, "Experimental Investigation of Shear Capacity of Precast Reinforced Concrete Box Culverts," Journal of Bridge Engineering, vol. 12, pp. 511-517, 2007/07/01 2007.
[6] A. W. W. h. G. S. Y. H. Y. B. H. Shiguang, "Brief Analysis of Design and Production of Prefabricated Box Culverts in Integrated Pipe Gallery," Concrete world/China Concrete, 2018.
[7] L. Mengna, "Finite element structure analysis of underground box culvert," Zhengzhou University, 2014.
[8] W. Wei, "Research on Design Technology of Composite Culvert Frame Combination Culvert Structure," Xinjiang University, 2013.
[9] J. T.-C. o. Chinese, "precast concrete box culvert," China Concrete and Cement Products, 2018.
[10] C. o. China, Code for design concrete structures vol. GB50010: Publishing House of building Industry in China, Beijing (in Chineses), 2010.
[11] M. V. R. R. T. Tejaswini, "Analysis of RCC Beams using ABAQUS," International Journal of Innovations in Engineering and Technology (IJIET), vol. 5, pp. 248-255, 2015.
[12] S. K. K. A. C. LANDE, S. A. MAHADIK., "Finite Element Analysis of Box Culvert," International Journal of Advanced Structures and Geotechnical Engineering, vol. 04, pp. 57-62, 2015.
[13] G. B. Xu Chuan, "Finite element analysis and internal force diagram of box culvert," Journal of Disaster Prevention and Mitigation, vol. 34, pp. 92-96, 2018.
[14] R. I. Pawtucket, Abaqus/CAE -V6.14-4-Users Guide, 2014.
[15] Y. Y. Liu Liyu, Liu Xian, "Finite element analysis of double replacement method for box culvert jacking," Journal of Building Construction, vol. 32, pp. 110-112, 2010, 32 (02): 110-112.
[16] A. J. Wang Shuhong, Jie Rula, Wang Pengyu, Liu Weihua, "Simulation of Force Performance of Precast Rectangular Box Culvert and Its Potential Failure Mode," Journal of Northeastern University (Natural Science), 2018.
Cite This Article
  • APA Style

    Zenagebriel Gebremedhn, Guofu Qiao, Jilong Li. (2018). Finite Element Modeling and Analysis of Precast Reinforced Concrete U-Shaped Box Culvert Using ABAQUS. American Journal of Civil Engineering, 6(5), 162-166. https://doi.org/10.11648/j.ajce.20180605.14

    Copy | Download

    ACS Style

    Zenagebriel Gebremedhn; Guofu Qiao; Jilong Li. Finite Element Modeling and Analysis of Precast Reinforced Concrete U-Shaped Box Culvert Using ABAQUS. Am. J. Civ. Eng. 2018, 6(5), 162-166. doi: 10.11648/j.ajce.20180605.14

    Copy | Download

    AMA Style

    Zenagebriel Gebremedhn, Guofu Qiao, Jilong Li. Finite Element Modeling and Analysis of Precast Reinforced Concrete U-Shaped Box Culvert Using ABAQUS. Am J Civ Eng. 2018;6(5):162-166. doi: 10.11648/j.ajce.20180605.14

    Copy | Download

  • @article{10.11648/j.ajce.20180605.14,
      author = {Zenagebriel Gebremedhn and Guofu Qiao and Jilong Li},
      title = {Finite Element Modeling and Analysis of Precast Reinforced Concrete U-Shaped Box Culvert Using ABAQUS},
      journal = {American Journal of Civil Engineering},
      volume = {6},
      number = {5},
      pages = {162-166},
      doi = {10.11648/j.ajce.20180605.14},
      url = {https://doi.org/10.11648/j.ajce.20180605.14},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajce.20180605.14},
      abstract = {This paper presents the finite element results of a parametric investigation of the U-shaped box culvert of prefabricated reinforced concrete subject to loading conditions. It was included outer size span length 4.80m, rise of 4.80m, laying width 1.5m and 0.4m slab and wall thickness. Its components consisted of two symmetrical u-shaped structures joined together using the tip at the end of the bell. It was not recommended for areas with excessive settlement where deep foundations were required. The upper and side ground pressure was considered in the culvert, which depends on the depth of the canal. The finite element method has been chosen for purpose of modeling and analyzing the structural behaver of the standard three dimensional solid and wire elements of the u-shaped box culvert under different loading conditions using ABAQUS-V6.14-4 due to its flexibility in creating geometry and material modeling. The culvert has been modeled using 3-D solid (C3D8R) elements reduce integration for concrete and 3-D wire (T3D2H) elements for reinforcement having geometric and material linearity as well as hybrid formulation. The reinforcement was modeled as rebar elements embedded in the surface element. Finally, the Finite element analysis (FEA) results were showed deflection and stress as well as effect of with and without distribution steel on the culvert.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Finite Element Modeling and Analysis of Precast Reinforced Concrete U-Shaped Box Culvert Using ABAQUS
    AU  - Zenagebriel Gebremedhn
    AU  - Guofu Qiao
    AU  - Jilong Li
    Y1  - 2018/12/11
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ajce.20180605.14
    DO  - 10.11648/j.ajce.20180605.14
    T2  - American Journal of Civil Engineering
    JF  - American Journal of Civil Engineering
    JO  - American Journal of Civil Engineering
    SP  - 162
    EP  - 166
    PB  - Science Publishing Group
    SN  - 2330-8737
    UR  - https://doi.org/10.11648/j.ajce.20180605.14
    AB  - This paper presents the finite element results of a parametric investigation of the U-shaped box culvert of prefabricated reinforced concrete subject to loading conditions. It was included outer size span length 4.80m, rise of 4.80m, laying width 1.5m and 0.4m slab and wall thickness. Its components consisted of two symmetrical u-shaped structures joined together using the tip at the end of the bell. It was not recommended for areas with excessive settlement where deep foundations were required. The upper and side ground pressure was considered in the culvert, which depends on the depth of the canal. The finite element method has been chosen for purpose of modeling and analyzing the structural behaver of the standard three dimensional solid and wire elements of the u-shaped box culvert under different loading conditions using ABAQUS-V6.14-4 due to its flexibility in creating geometry and material modeling. The culvert has been modeled using 3-D solid (C3D8R) elements reduce integration for concrete and 3-D wire (T3D2H) elements for reinforcement having geometric and material linearity as well as hybrid formulation. The reinforcement was modeled as rebar elements embedded in the surface element. Finally, the Finite element analysis (FEA) results were showed deflection and stress as well as effect of with and without distribution steel on the culvert.
    VL  - 6
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • School of Civil Engineering, Harbin Institute of Technology, Harbin, China

  • School of Civil Engineering, Harbin Institute of Technology, Harbin, China

  • School of Civil Engineering, Harbin Institute of Technology, Harbin, China

  • Sections