| Peer-Reviewed

Evaluation of Torsional Capacity of Square RC Columns Strengthened with CFRP Using Finite Element Modeling

Received: 7 October 2013     Published: 10 November 2013
Views:       Downloads:
Abstract

Researches on behavior of reinforced concrete (RC) columns subjected to torsion including mechanical properties like cracks and failure modes are not commonly studied and investigated well. It is necessary to investigate the mechanical properties and characteristics for RC columns subjected to torsion during different types of loading including earthquakes. Also, as a reinforcing method to existing RC structures, the application of Carbon Fiber Reinforced Polymers (CFRP) became common. CFRP has properties of high tensile strength, light weight and easy execution. CFRP is easy to adjust the reinforcement volume whenever necessary and considered excellent in endurance because the rust will not occur. The purpose of this study is to present a model suitable for analyzing square RC columns strengthened with CFRP under torsional effects and developing a reasonable method for calculating angles of twist for square concrete columns using the finite element method. Final available version of finite element analysis software [ANSYS 14 – 64 bits] is used to solve the problem and to predict the torsional behavior of the columns under investigation. The results are compared and verified with an experimental study and the numerical results showed acceptable agreement with the experimental results. Several important parameters affecting the torsional capacity of square columns strengthened with CFRP under torsion are studied in parametric study. These parameters include: the presence (distribution type) of CFRP, CFRP number of layers (thickness), type of interface between CFRP layers and concrete surface, CFRP orientation and effect of applying axial load in addition to torque. The results showed that zebra shape (where sheets are straight and fibers are inclined with 45o) is the best way to increase the torsional capacity of RC columns.

Published in American Journal of Civil Engineering (Volume 1, Issue 3)
DOI 10.11648/j.ajce.20130103.15
Page(s) 111-123
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Torsion, RC Columns, CFRP, FEA, ANSYS

References
[1] Shrive P.L., Azarnejad A., Tadros G., McWhinnie C., and Shrive N.G., "Strengthening of concrete columns with carbon fiber reinforced polymer wrap ", Canadian Journal of Civil Engineering, May, Vol. 30, 2003, pp. 543–554.
[2] Norayanan R., "Axially Compressed Structures Stability and Strength", Applied Science Publishers, LTD., 1982.
[3] Zhou J., Hirosawa M., Kondo T., and Shimizu Y., "Effect of the torsional moment on the shear strength of reinforced concrete columns due to eccentric jointing of beam to column ", 12th world conference of earthquake engineering, Auckland, New Zealand, Sunday, 2000.
[4] Manopulo N., "An Introduction to Finite Element Methods" Seminar: Interplay of Mathematical Modeling and Numerical Simulation, May, 2005, 16pp.
[5] He, H.M., and Kiyomiya, O., "Study on torsion properties of carbon fiber sheets strengthened PC member with zebra-shaped", Journal of Structural Eng./ Earthquake Eng., JSCE, Vol. 25, No 1, 2008, pp. 1s-15s.
[6] ANSYS, "ANSYS Help", Release 14.0, Copyright 2013.
[7] ACI Committee 318, "Building Code Requirements fo Structural Concrete (ACI 318M-11) and Commentary (ACI 318R-11)", American Concrete Institute, Farmington Hills, MI, 2008, 466 pp.
[8] Kachlakev D., Miller Th., Yim S., Chansawat K. and Potisuk T., "Finite Element Modeling of Reinforced Concrete Structures Strengthened with FRP Laminates", Report for Oregon Department Of Transportation, May, 2001, 99 pp.
[9] Nilson A., Darwin D., Dolan C., "Design of Prestressed Concrete", John Wiley & sons, 2nd edition, 1987, 43 pp.
Cite This Article
  • APA Style

    Ahmed Sameer Younus, Ammar A. Abdul Rahman. (2013). Evaluation of Torsional Capacity of Square RC Columns Strengthened with CFRP Using Finite Element Modeling. American Journal of Civil Engineering, 1(3), 111-123. https://doi.org/10.11648/j.ajce.20130103.15

    Copy | Download

    ACS Style

    Ahmed Sameer Younus; Ammar A. Abdul Rahman. Evaluation of Torsional Capacity of Square RC Columns Strengthened with CFRP Using Finite Element Modeling. Am. J. Civ. Eng. 2013, 1(3), 111-123. doi: 10.11648/j.ajce.20130103.15

    Copy | Download

    AMA Style

    Ahmed Sameer Younus, Ammar A. Abdul Rahman. Evaluation of Torsional Capacity of Square RC Columns Strengthened with CFRP Using Finite Element Modeling. Am J Civ Eng. 2013;1(3):111-123. doi: 10.11648/j.ajce.20130103.15

    Copy | Download

  • @article{10.11648/j.ajce.20130103.15,
      author = {Ahmed Sameer Younus and Ammar A. Abdul Rahman},
      title = {Evaluation of Torsional Capacity of Square RC Columns Strengthened with CFRP Using Finite Element Modeling},
      journal = {American Journal of Civil Engineering},
      volume = {1},
      number = {3},
      pages = {111-123},
      doi = {10.11648/j.ajce.20130103.15},
      url = {https://doi.org/10.11648/j.ajce.20130103.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajce.20130103.15},
      abstract = {Researches on behavior of reinforced concrete (RC) columns subjected to torsion including mechanical properties like cracks and failure modes are not commonly studied and investigated well. It is necessary to investigate the mechanical properties and characteristics for RC columns subjected to torsion during different types of loading including earthquakes. Also, as a reinforcing method to existing RC structures, the application of Carbon Fiber Reinforced Polymers (CFRP) became common. CFRP has properties of high tensile strength, light weight and easy execution. CFRP is easy to adjust the reinforcement volume whenever necessary and considered excellent in endurance because the rust will not occur. The purpose of this study is to present a model suitable for analyzing square RC columns strengthened with CFRP under torsional effects and developing a reasonable method for calculating angles of twist for square concrete columns using the finite element method. Final available version of finite element analysis software [ANSYS 14 – 64 bits] is used to solve the problem and to predict the torsional behavior of the columns under investigation. The results are compared and verified with an experimental study and the numerical results showed acceptable agreement with the experimental results. Several important parameters affecting the torsional capacity of square columns strengthened with CFRP under torsion are studied in parametric study. These parameters include: the presence (distribution type) of CFRP, CFRP number of layers (thickness), type of interface between CFRP layers and concrete surface, CFRP orientation and effect of applying axial load in addition to torque. The results showed that zebra shape (where sheets are straight and fibers are inclined with 45o) is the best way to increase the torsional capacity of RC columns.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Evaluation of Torsional Capacity of Square RC Columns Strengthened with CFRP Using Finite Element Modeling
    AU  - Ahmed Sameer Younus
    AU  - Ammar A. Abdul Rahman
    Y1  - 2013/11/10
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ajce.20130103.15
    DO  - 10.11648/j.ajce.20130103.15
    T2  - American Journal of Civil Engineering
    JF  - American Journal of Civil Engineering
    JO  - American Journal of Civil Engineering
    SP  - 111
    EP  - 123
    PB  - Science Publishing Group
    SN  - 2330-8737
    UR  - https://doi.org/10.11648/j.ajce.20130103.15
    AB  - Researches on behavior of reinforced concrete (RC) columns subjected to torsion including mechanical properties like cracks and failure modes are not commonly studied and investigated well. It is necessary to investigate the mechanical properties and characteristics for RC columns subjected to torsion during different types of loading including earthquakes. Also, as a reinforcing method to existing RC structures, the application of Carbon Fiber Reinforced Polymers (CFRP) became common. CFRP has properties of high tensile strength, light weight and easy execution. CFRP is easy to adjust the reinforcement volume whenever necessary and considered excellent in endurance because the rust will not occur. The purpose of this study is to present a model suitable for analyzing square RC columns strengthened with CFRP under torsional effects and developing a reasonable method for calculating angles of twist for square concrete columns using the finite element method. Final available version of finite element analysis software [ANSYS 14 – 64 bits] is used to solve the problem and to predict the torsional behavior of the columns under investigation. The results are compared and verified with an experimental study and the numerical results showed acceptable agreement with the experimental results. Several important parameters affecting the torsional capacity of square columns strengthened with CFRP under torsion are studied in parametric study. These parameters include: the presence (distribution type) of CFRP, CFRP number of layers (thickness), type of interface between CFRP layers and concrete surface, CFRP orientation and effect of applying axial load in addition to torque. The results showed that zebra shape (where sheets are straight and fibers are inclined with 45o) is the best way to increase the torsional capacity of RC columns.
    VL  - 1
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Structural Engineering, Civil Engineering Department, Al Nahrain University, Baghdad, IRAQ

  • Structural Engineering, Faculty Member, Civil Engineering Department, Al Nahrain University, Baghdad, IRAQ

  • Sections