The article discusses innovative areas of development of forestry and agricultural machinery with intelligent control systems. Kinematics is considered using the example of a harvester with a multi-link manipulator and walking chassis. Systems of equations are presented that characterize the spatial position of the working and chassis equipment with a large number of degrees of freedom. For this purpose, many companies have set themselves the task of creating multifunctional robots that operate autonomously and are controlled remotely using cloud technologies with special software. Intelligent control systems currently being developed can significantly expand the technological capabilities of machines that were unavailable in the not so distant past. The use of robots allows the introduction of new highly efficient technologies in which a person will be relieved of heavy physical labor, work in hazardous conditions, aggressive environments, etc. As a result of using robots, significant savings in material and labor resources, increased labor productivity and reduced production costs can be achieved. Currently, the use of walking vehicles for cargo transportation, clearing rubble, conducting emergency rescue operations in undeveloped areas in off-road conditions, as well as military use is considered promising. An assessment of existing problems and development prospects is given.
| Published in | Agriculture, Forestry and Fisheries (Volume 13, Issue 6) |
| DOI | 10.11648/j.aff.20241306.15 |
| Page(s) | 260-264 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Agrobotagrobot, Innovative Directions, Technology, Autonomous Robot Platforms
| [1] | Official website of FlierSystems . [Electronic resource.] – Access mode: |
| [2] | The official website of the company AutonomousTractor. [Electronic resource.] – Access mode: |
| [3] | The official website of Agrobot. [Electronic resource.] – Access mode: |
| [4] | Official website of the Wall-Ye company [Electronic resource.] – Access mode: |
| [5] | The official website of EcoRobotix [Electronic resource.] – Access mode: |
| [6] | Official website of Amazone-Werkeg GmbH [Electronic resource.] – Access mode: |
| [7] | Truflyak E. V. The main elements of the precision farming system / E. V. Truflyak. – Krasnodar: KubGAU, 2016. – 39 p. |
| [8] | Truflyak E. V. Systems of parallel driving / E. V. Truflyak. – Krasnodar: KubGAU, 2016. – 72 p. |
| [9] | Official website of JohnDeere [Electronic resource.] – Access mode: |
| [10] | Differential equations in examples and problems. - Reference manual on higher mathematics. Volume 5 Boyarchuk A K, Golovach G P 2001. |
APA Style
Shavazov, K., Zhuravleva, L., Karpov, M. (2024). AGRO-robotics: Problems and Prospects. Agriculture, Forestry and Fisheries, 13(6), 260-264. https://doi.org/10.11648/j.aff.20241306.15
ACS Style
Shavazov, K.; Zhuravleva, L.; Karpov, M. AGRO-robotics: Problems and Prospects. Agric. For. Fish. 2024, 13(6), 260-264. doi: 10.11648/j.aff.20241306.15
AMA Style
Shavazov K, Zhuravleva L, Karpov M. AGRO-robotics: Problems and Prospects. Agric For Fish. 2024;13(6):260-264. doi: 10.11648/j.aff.20241306.15
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.aff.20241306.15,
author = {Kadirjon Shavazov and Larisa Zhuravleva and Mihail Karpov},
title = {AGRO-robotics: Problems and Prospects
},
journal = {Agriculture, Forestry and Fisheries},
volume = {13},
number = {6},
pages = {260-264},
doi = {10.11648/j.aff.20241306.15},
url = {https://doi.org/10.11648/j.aff.20241306.15},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.aff.20241306.15},
abstract = {The article discusses innovative areas of development of forestry and agricultural machinery with intelligent control systems. Kinematics is considered using the example of a harvester with a multi-link manipulator and walking chassis. Systems of equations are presented that characterize the spatial position of the working and chassis equipment with a large number of degrees of freedom. For this purpose, many companies have set themselves the task of creating multifunctional robots that operate autonomously and are controlled remotely using cloud technologies with special software. Intelligent control systems currently being developed can significantly expand the technological capabilities of machines that were unavailable in the not so distant past. The use of robots allows the introduction of new highly efficient technologies in which a person will be relieved of heavy physical labor, work in hazardous conditions, aggressive environments, etc. As a result of using robots, significant savings in material and labor resources, increased labor productivity and reduced production costs can be achieved. Currently, the use of walking vehicles for cargo transportation, clearing rubble, conducting emergency rescue operations in undeveloped areas in off-road conditions, as well as military use is considered promising. An assessment of existing problems and development prospects is given.
},
year = {2024}
}
TY - JOUR T1 - AGRO-robotics: Problems and Prospects AU - Kadirjon Shavazov AU - Larisa Zhuravleva AU - Mihail Karpov Y1 - 2024/11/29 PY - 2024 N1 - https://doi.org/10.11648/j.aff.20241306.15 DO - 10.11648/j.aff.20241306.15 T2 - Agriculture, Forestry and Fisheries JF - Agriculture, Forestry and Fisheries JO - Agriculture, Forestry and Fisheries SP - 260 EP - 264 PB - Science Publishing Group SN - 2328-5648 UR - https://doi.org/10.11648/j.aff.20241306.15 AB - The article discusses innovative areas of development of forestry and agricultural machinery with intelligent control systems. Kinematics is considered using the example of a harvester with a multi-link manipulator and walking chassis. Systems of equations are presented that characterize the spatial position of the working and chassis equipment with a large number of degrees of freedom. For this purpose, many companies have set themselves the task of creating multifunctional robots that operate autonomously and are controlled remotely using cloud technologies with special software. Intelligent control systems currently being developed can significantly expand the technological capabilities of machines that were unavailable in the not so distant past. The use of robots allows the introduction of new highly efficient technologies in which a person will be relieved of heavy physical labor, work in hazardous conditions, aggressive environments, etc. As a result of using robots, significant savings in material and labor resources, increased labor productivity and reduced production costs can be achieved. Currently, the use of walking vehicles for cargo transportation, clearing rubble, conducting emergency rescue operations in undeveloped areas in off-road conditions, as well as military use is considered promising. An assessment of existing problems and development prospects is given. VL - 13 IS - 6 ER -
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, National Research University, Tashkent, Uzbekistan
Moscow Timiryazev Agricultural Academy, Russian State Agrarian University, Moscow, Russian Federation
Moscow Timiryazev Agricultural Academy, Russian State Agrarian University, Moscow, Russian Federation
Information