| Peer-Reviewed

Study on the Form and Production Technology of Wood Structure Building

Received: 18 July 2021     Accepted: 29 July 2021     Published: 4 August 2021
Views:       Downloads:
Abstract

Wood structure is a structure that only or mainly bears the load by wood, and it is connected and fixed by various metal connectors or mortise and tenon means. According to the classification of materials used, it can be divided into: ordinary wood structure, glulam structure, and light wood structure. Wood is the only renewable material in building materials. As a structural material, the seismic performance of wood is obviously better than other materials. Timber structure building usually uses standard timber and wood-based structural board or gypsum board to make timber frame wall, floor and roof system. Light wood structure building, log structure building and ordinary structure building have their own characteristics, production technology and processing equipment are different. Wood structure architecture has a long history, but at the same time, the development of wood structure is also facing a series of problems. The misunderstanding of wood structure buildings is first reflected in the belief that cutting down trees to build wood structure buildings destroys ecology and is not environmental friendly. Another important misunderstanding is flammability. In addition, there are many misunderstandings about wood structure architecture, such as weak strength, easy corrosion and so on. In fact, all these problems have been better solved with the development of modern technology. This paper studies the form and production technology of wood structure building, and discusses the existing problems of wood structure building as well as the protection technology of wood structure.

Published in Advances in Applied Sciences (Volume 6, Issue 3)
DOI 10.11648/j.aas.20210603.13
Page(s) 54-58
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Wood Structure, Building Form, Production Technology, Building Material

References
[1] U. S. Department of Agriculture, Forest Service, Forest Products Laboratory. Wood Handbook Wood as an Engineering Material [M]. General Technical Report FPL-GTR-190. 2010. Madison, WI.
[2] Jungmeier G, Werner F, Jarnehammer A (2020) Allocation in LCA of wood-based products; experiences of Cost Action E9; part I. methodology. The International Journal of Life Cycle Assessment, 7: 290-294.
[3] Werner F, Richter K (2007) Wooden building products in comparative LCA. The International Journal of Life Cycle Assessment, 12 (7): 470-479.
[4] Zeng J. Yu, H. Y. Zhang, D. D (2018). Comparison of carbon emission between wood structural materials and other building structural materials. Wood Industry, 32 (1): 28-32.
[5] Fallis A. G., S. Gagnon, C. Pirvu. (2011) CLT handbook: cross-laminated timber [M]. FP Innovations. Vancouver, Canada.
[6] Qiu P. F, Peng L, Ni Z. P (2020) Fire safety requirements and current status for multi-story and high-rise timber buildings. Architecture Technology, 51 (3): 275-278.
[7] Bowyer J D, Briggs B, Lippke J (2004) Life cycle environmental performance of renewable building materials in the context of residential construction. Consortium for Research on Renewable Industrial Materials. University of Washington, Seattle, WA.
[8] Garcia J, Lippke B, Briggs D (2005) The environmental performance of renewable building materials in the context of residential construction. Wood and Fiber Science, 37: 3-17.
[9] Zhang Z. Z (2019) Theoretical Logic of the "Material Circulation and Reutilization" Thought: Based on the dimension of Marxist Green Development. Journal of Central South University of Forestry & Technology, 13 (1): 12-17.
[10] Cui W. Z (2019) Study on the development of forestry industry from the perspective of circular economy. Science and Technology Innovation Herald, 16 (19): 255-257.
Cite This Article
  • APA Style

    Lei Chen, Weitao Xu, Baoyu Huang. (2021). Study on the Form and Production Technology of Wood Structure Building. Advances in Applied Sciences, 6(3), 54-58. https://doi.org/10.11648/j.aas.20210603.13

    Copy | Download

    ACS Style

    Lei Chen; Weitao Xu; Baoyu Huang. Study on the Form and Production Technology of Wood Structure Building. Adv. Appl. Sci. 2021, 6(3), 54-58. doi: 10.11648/j.aas.20210603.13

    Copy | Download

    AMA Style

    Lei Chen, Weitao Xu, Baoyu Huang. Study on the Form and Production Technology of Wood Structure Building. Adv Appl Sci. 2021;6(3):54-58. doi: 10.11648/j.aas.20210603.13

    Copy | Download

  • @article{10.11648/j.aas.20210603.13,
      author = {Lei Chen and Weitao Xu and Baoyu Huang},
      title = {Study on the Form and Production Technology of Wood Structure Building},
      journal = {Advances in Applied Sciences},
      volume = {6},
      number = {3},
      pages = {54-58},
      doi = {10.11648/j.aas.20210603.13},
      url = {https://doi.org/10.11648/j.aas.20210603.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.aas.20210603.13},
      abstract = {Wood structure is a structure that only or mainly bears the load by wood, and it is connected and fixed by various metal connectors or mortise and tenon means. According to the classification of materials used, it can be divided into: ordinary wood structure, glulam structure, and light wood structure. Wood is the only renewable material in building materials. As a structural material, the seismic performance of wood is obviously better than other materials. Timber structure building usually uses standard timber and wood-based structural board or gypsum board to make timber frame wall, floor and roof system. Light wood structure building, log structure building and ordinary structure building have their own characteristics, production technology and processing equipment are different. Wood structure architecture has a long history, but at the same time, the development of wood structure is also facing a series of problems. The misunderstanding of wood structure buildings is first reflected in the belief that cutting down trees to build wood structure buildings destroys ecology and is not environmental friendly. Another important misunderstanding is flammability. In addition, there are many misunderstandings about wood structure architecture, such as weak strength, easy corrosion and so on. In fact, all these problems have been better solved with the development of modern technology. This paper studies the form and production technology of wood structure building, and discusses the existing problems of wood structure building as well as the protection technology of wood structure.},
     year = {2021}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Study on the Form and Production Technology of Wood Structure Building
    AU  - Lei Chen
    AU  - Weitao Xu
    AU  - Baoyu Huang
    Y1  - 2021/08/04
    PY  - 2021
    N1  - https://doi.org/10.11648/j.aas.20210603.13
    DO  - 10.11648/j.aas.20210603.13
    T2  - Advances in Applied Sciences
    JF  - Advances in Applied Sciences
    JO  - Advances in Applied Sciences
    SP  - 54
    EP  - 58
    PB  - Science Publishing Group
    SN  - 2575-1514
    UR  - https://doi.org/10.11648/j.aas.20210603.13
    AB  - Wood structure is a structure that only or mainly bears the load by wood, and it is connected and fixed by various metal connectors or mortise and tenon means. According to the classification of materials used, it can be divided into: ordinary wood structure, glulam structure, and light wood structure. Wood is the only renewable material in building materials. As a structural material, the seismic performance of wood is obviously better than other materials. Timber structure building usually uses standard timber and wood-based structural board or gypsum board to make timber frame wall, floor and roof system. Light wood structure building, log structure building and ordinary structure building have their own characteristics, production technology and processing equipment are different. Wood structure architecture has a long history, but at the same time, the development of wood structure is also facing a series of problems. The misunderstanding of wood structure buildings is first reflected in the belief that cutting down trees to build wood structure buildings destroys ecology and is not environmental friendly. Another important misunderstanding is flammability. In addition, there are many misunderstandings about wood structure architecture, such as weak strength, easy corrosion and so on. In fact, all these problems have been better solved with the development of modern technology. This paper studies the form and production technology of wood structure building, and discusses the existing problems of wood structure building as well as the protection technology of wood structure.
    VL  - 6
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Planning and Design Institute of Forest Products Industry of National Forestry and Grassland Administration, Beijing, China

  • Planning and Design Institute of Forest Products Industry of National Forestry and Grassland Administration, Beijing, China

  • College of Forestry, Shandong Agricultural University, Taian, China

  • Sections