| Peer-Reviewed

A Comparative Study on Compressive Strength of Concrete Mix Containing Plastic, Glass and Rubber Aggregates

Received: 20 July 2020     Accepted: 30 July 2020     Published: 4 November 2020
Views:       Downloads:
Abstract

In this study, the behavior of the recycled plastic, glass and rubber tire as partial replacement of coarse aggregate in concrete have been investigated. Polyethylene terephthalate (PET) bottles, one of the waste plastic types, broken glass of bottles and rubber tires are used for these purposes. The reason to choose these to transfer the recycles materials into valuable product and to solve the problem of dumping the tons of plastic waste, broken glass and rickshaw tires. In this study compressive strength of cylinder concrete specimens were carried out at 7 and 28 days curing. Six concrete mixes have been studied, those are—reference specimens with no recycled material (CS0), specimens with 15% plastic (CSP15), specimens with 15% (CSR15) and 30% (CSR30) tire, specimens with 15% (CSG15) and 30% (CSG30) glass. Total 24 cylindrical specimen of 8”x4” were tested for compressive strength. The order of compressive strength was CS0 > CSG30 > CSG15 > CSR15 > CSR30 > CSP15. The Study found that compressive strength of concrete mix decreases with the increase of plastic and rubber content. However, compressive strength of concrete increases with the increase of glass content. Plastic material have low bonding with cement in concrete and perform poorly. On contrary, glass works very well with concrete and compressive strength of concrete reduces with the increase of rubber content.

Published in Advances in Applied Sciences (Volume 5, Issue 4)
DOI 10.11648/j.aas.20200504.11
Page(s) 97-102
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Waste Plastic, Broken Glass, Rubber Tire, Concrete Compressive Strength, Non-biodegradable Materials

References
[1] Gaikwad, M. N., Shubham, A. G., Gannesh, Y. H., Mangesh, M. K., & Pratik, A. G. (2018). Experimental study on plastic waste as a course aggregate for structural concrete. International Journal on Recent and Innovation Trends in Computing and Communication, 6 (4), 63-67.
[2] Bt, A. M. (2016). Partial replacement of e-plastic waste as coarse-aggregate in concrete. Procedia Environmental Sciences, 35, 731-739.
[3] Jaivignesh, B., & Sofi, A. (2017, July). Study on mechanical properties of concrete using plastic waste as an aggregate. In IOP Conference Series: Earth and Environmental Science (Vol. 80, No. 1, p. 012016).
[4] Islam, M. J., Dipta, I. A., & Rahat, M. (2018). Investigation of recycled poly-ethylene terephthalate (PET) as partial replacement of coarse aggregate in concrete. Journal of Civil Engineering (IEB), 46 (1), 11-20.
[5] Rajagopalan, P., Balaji, V., Unnikrishnan, N., Haq, T. J., & Bhuvaneshwari, P. (2017, July). Study of Bond Characteristics of Reinforced Waste Glass Aggregate Concrete. In IOP Conf. Series: Earth and Environmental Science.
[6] Olofinnade, O. M., Ndambuki, J. M., Ede, A. N., & Olukanni, D. O. (2016). Effect of substitution of crushed waste glass as partial replacement for natural fine and coarse aggregate in concrete. In Materials Science Forum (Vol. 866, pp. 58-62). Trans Tech Publications Ltd.
[7] Metawei, H., Elkashif, A. F., Arafa, D., & Taha, N. A. (2019). Experimental Study on Concrete Made With Waste Glass Aggregates. Al Azhar University Journal.
[8] Mohammadinia, A., Wong, Y. C., Arulrajah, A., & Horpibulsuk, S. (2019). Strength evaluation of utilizing recycled plastic waste and recycled crushed glass in concrete footpaths. Construction and Building Materials, 197, 489-496.
[9] Záleská, M., Pavlíková, M., Čítek, D., & Pavlík, Z. (2019, November). Mechanical and thermal properties of light-weight concrete with incorporated waste tire rubber as coarse aggregate. In AIP Conference Proceedings (Vol. 2170, No. 1, p. 020026). AIP Publishing LLC.
[10] Banasode, N. Y. (2017). Investigation Performance by Relatively Substitution of Cement and Coarse Aggregate by Fly ash and Waste Tire Rubber in Concrete. International Research Journal of Engineering and Technology, 4 (10), 1615-1619.
[11] David, T. K., Chandrasegaran, R. S., & Nair, S. K. (2018, June). Modified pervious concrete containing recycled asphalt pavement and waste tire rubber. In IOP Conference Series: Materials Science and Engineering (Vol. 371, p. 012011). IOP Publishing.
[12] ASTM, (2001). ASTM C150: Standard specification for Portland cement. Philadelphia^ ePA PA: ASTM.
[13] Standard, A. S. T. M., C566 (2013). Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying. ASTM International, West Conshohocken, PA, 2013, DOI: 10.1520/C0566-13.
[14] ASTM, C. (2006). Standard test method for sieve analysis of fine and coarse aggregates. ASTM C136-06.
[15] ASTM C192. (2016). ASTM C192/C192M—16a standard practice for making and curing concrete test specimens in the laboratory. ASTM Standard Book, 4-9.
Cite This Article
  • APA Style

    Khandaker Samin Atif, Md. Asadullah-Al-Galib, Nabil Ahmed, Nayem Hasan, Saurav Barua. (2020). A Comparative Study on Compressive Strength of Concrete Mix Containing Plastic, Glass and Rubber Aggregates. Advances in Applied Sciences, 5(4), 97-102. https://doi.org/10.11648/j.aas.20200504.11

    Copy | Download

    ACS Style

    Khandaker Samin Atif; Md. Asadullah-Al-Galib; Nabil Ahmed; Nayem Hasan; Saurav Barua. A Comparative Study on Compressive Strength of Concrete Mix Containing Plastic, Glass and Rubber Aggregates. Adv. Appl. Sci. 2020, 5(4), 97-102. doi: 10.11648/j.aas.20200504.11

    Copy | Download

    AMA Style

    Khandaker Samin Atif, Md. Asadullah-Al-Galib, Nabil Ahmed, Nayem Hasan, Saurav Barua. A Comparative Study on Compressive Strength of Concrete Mix Containing Plastic, Glass and Rubber Aggregates. Adv Appl Sci. 2020;5(4):97-102. doi: 10.11648/j.aas.20200504.11

    Copy | Download

  • @article{10.11648/j.aas.20200504.11,
      author = {Khandaker Samin Atif and Md. Asadullah-Al-Galib and Nabil Ahmed and Nayem Hasan and Saurav Barua},
      title = {A Comparative Study on Compressive Strength of Concrete Mix Containing Plastic, Glass and Rubber Aggregates},
      journal = {Advances in Applied Sciences},
      volume = {5},
      number = {4},
      pages = {97-102},
      doi = {10.11648/j.aas.20200504.11},
      url = {https://doi.org/10.11648/j.aas.20200504.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.aas.20200504.11},
      abstract = {In this study, the behavior of the recycled plastic, glass and rubber tire as partial replacement of coarse aggregate in concrete have been investigated. Polyethylene terephthalate (PET) bottles, one of the waste plastic types, broken glass of bottles and rubber tires are used for these purposes. The reason to choose these to transfer the recycles materials into valuable product and to solve the problem of dumping the tons of plastic waste, broken glass and rickshaw tires. In this study compressive strength of cylinder concrete specimens were carried out at 7 and 28 days curing. Six concrete mixes have been studied, those are—reference specimens with no recycled material (CS0), specimens with 15% plastic (CSP15), specimens with 15% (CSR15) and 30% (CSR30) tire, specimens with 15% (CSG15) and 30% (CSG30) glass. Total 24 cylindrical specimen of 8”x4” were tested for compressive strength. The order of compressive strength was CS0 > CSG30 > CSG15 > CSR15 > CSR30 > CSP15. The Study found that compressive strength of concrete mix decreases with the increase of plastic and rubber content. However, compressive strength of concrete increases with the increase of glass content. Plastic material have low bonding with cement in concrete and perform poorly. On contrary, glass works very well with concrete and compressive strength of concrete reduces with the increase of rubber content.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - A Comparative Study on Compressive Strength of Concrete Mix Containing Plastic, Glass and Rubber Aggregates
    AU  - Khandaker Samin Atif
    AU  - Md. Asadullah-Al-Galib
    AU  - Nabil Ahmed
    AU  - Nayem Hasan
    AU  - Saurav Barua
    Y1  - 2020/11/04
    PY  - 2020
    N1  - https://doi.org/10.11648/j.aas.20200504.11
    DO  - 10.11648/j.aas.20200504.11
    T2  - Advances in Applied Sciences
    JF  - Advances in Applied Sciences
    JO  - Advances in Applied Sciences
    SP  - 97
    EP  - 102
    PB  - Science Publishing Group
    SN  - 2575-1514
    UR  - https://doi.org/10.11648/j.aas.20200504.11
    AB  - In this study, the behavior of the recycled plastic, glass and rubber tire as partial replacement of coarse aggregate in concrete have been investigated. Polyethylene terephthalate (PET) bottles, one of the waste plastic types, broken glass of bottles and rubber tires are used for these purposes. The reason to choose these to transfer the recycles materials into valuable product and to solve the problem of dumping the tons of plastic waste, broken glass and rickshaw tires. In this study compressive strength of cylinder concrete specimens were carried out at 7 and 28 days curing. Six concrete mixes have been studied, those are—reference specimens with no recycled material (CS0), specimens with 15% plastic (CSP15), specimens with 15% (CSR15) and 30% (CSR30) tire, specimens with 15% (CSG15) and 30% (CSG30) glass. Total 24 cylindrical specimen of 8”x4” were tested for compressive strength. The order of compressive strength was CS0 > CSG30 > CSG15 > CSR15 > CSR30 > CSP15. The Study found that compressive strength of concrete mix decreases with the increase of plastic and rubber content. However, compressive strength of concrete increases with the increase of glass content. Plastic material have low bonding with cement in concrete and perform poorly. On contrary, glass works very well with concrete and compressive strength of concrete reduces with the increase of rubber content.
    VL  - 5
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Department of Civil Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh

  • Department of Civil Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh

  • Department of Civil Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh

  • Department of Civil Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh

  • Department of Civil Engineering, Daffodil International University, Dhaka, Bangladesh

  • Sections