Journal of Civil, Construction and Environmental Engineering

| Peer-Reviewed |

Cable Force Adjustment of Torsion Cable-Stayed Bridge

Received: 10 August 2018    Accepted: 24 August 2018    Published: 19 September 2018
Views:       Downloads:

Share This Article

Abstract

Cable force adjustment of cable-stayed bridge has been a hotspot. The structure of the cable-stayed bridge is more complicated, and its cable force adjustment method is also difficult. In order to explore the reasonable method to adjust the cable force of the torsion cable-stayed Bridges, this paper discusses the objectives and principles of cable tension adjustment. The influence matrix method and the finite element analysis software midas civil 2012 of bridge structure are used to design the scheme. The cable adjustment scheme is developed by using the trial algorithm, and the cable adjustment effect is analyzed. Firstly, influence matrix method was used to analyze the mutual influence degree between adjacent cables. Then the adjusting value of cable force is calculated by iteration until convergence. Input the adjustment values of each step into the finite element analysis software to analyze the adjustment process and results The whole bridge is monitored and measured in the course of cable adjustment. The monitoring results show that the cable force is close to the target value after the adjustment of the cable force. The alignment of bridge deck after adjustment is also in good agreement with the design, and the deflection of tower top is improved. This practice will provide a more important reference for similar project.

DOI 10.11648/j.jccee.20180304.12
Published in Journal of Civil, Construction and Environmental Engineering (Volume 3, Issue 4, August 2018)
Page(s) 106-110
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Cable-Stayed Bridge, Cable Force Adjustment, Twisting Cable Plane, Influence Matrix, Midas

References
[1] JIANG W, Research on Cable - changing Theory and Technical Problems of Cable - stayed Bridge[D].Chengdu: Southwest Jiaotong University, 2000.
[2] VIRLOGEUX M, Recent evolution of cable-stayed bridges[J]. Engineering Structures, vol.12(8),pp.737-755, 1999.
[3] JIA L, XIAO R, SUN B, et al, Influence Matrix Method for Determining Tensile Force of Cable - stayed Bridge[J]. Journal of Suzhou Urban Construction Environmental Protection College, vol.12(8), pp.737-755, 1999.
[4] XIAO R and XIANG H, Influence Matrix Method for Cable Force Optimization of Cable - Stayed Bridge[J]. Journal of Tongji University, vol.26(3), pp.235-240, 1998.
[5] DU P,ZHANG Z,LIU C,et al. Optimal Control of Cable Tensioning Process of Cable - Stayed Bridge [J]. Chinese Journal of Computational Mechanics, vol.22(3), pp.326-329, 2005.
[6] GUAN W and HAN D, Cable tension adjustment of cable - stayed bridge[J]. Journal of Kunming University of Technology, vol.25(1), pp.125-128, 2000.
[7] WANG M, Adjustment of Cable Force and Optimization of Tuning Order of Hongfeng Lake Bridge[D].Dalian:Dalian University of Technology,2005.
[8] FANG Z , WANG J and YAN J. Tension test of cable and boom based on frequency method[J]. Vibration and shock, vol.26(9), pp.78-82, 2007.
[9] Chongqing transportation research and design institute, Guidelines for Design of Highway Cable-stayed Bridge: JTG/T D65-01-2007 [S]. Beijing: China Communications Press, 2007.
[10] HUANG C, BU Y. Discussion on the development of construction control method of cable-stayed bridge [J]. Sichuan Architecture sichuan architecture, vol.03,12-15, 2007.
[11] HUANG C, BU Y. Discussion on the development of construction control method of cable-stayed bridge [J]. Sichuan Architecture sichuan architecture, vol.03,12-15, 2007.
[12] LIU S. On the basic situation and development prospect of cable-stayed bridge [J]. Henan building materials, vol.05, 2016.
Author Information
  • Shandong Transportation Institute, Jinan, China

Cite This Article
  • APA Style

    Li Cai. (2018). Cable Force Adjustment of Torsion Cable-Stayed Bridge. Journal of Civil, Construction and Environmental Engineering, 3(4), 106-110. https://doi.org/10.11648/j.jccee.20180304.12

    Copy | Download

    ACS Style

    Li Cai. Cable Force Adjustment of Torsion Cable-Stayed Bridge. J. Civ. Constr. Environ. Eng. 2018, 3(4), 106-110. doi: 10.11648/j.jccee.20180304.12

    Copy | Download

    AMA Style

    Li Cai. Cable Force Adjustment of Torsion Cable-Stayed Bridge. J Civ Constr Environ Eng. 2018;3(4):106-110. doi: 10.11648/j.jccee.20180304.12

    Copy | Download

  • @article{10.11648/j.jccee.20180304.12,
      author = {Li Cai},
      title = {Cable Force Adjustment of Torsion Cable-Stayed Bridge},
      journal = {Journal of Civil, Construction and Environmental Engineering},
      volume = {3},
      number = {4},
      pages = {106-110},
      doi = {10.11648/j.jccee.20180304.12},
      url = {https://doi.org/10.11648/j.jccee.20180304.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.jccee.20180304.12},
      abstract = {Cable force adjustment of cable-stayed bridge has been a hotspot. The structure of the cable-stayed bridge is more complicated, and its cable force adjustment method is also difficult. In order to explore the reasonable method to adjust the cable force of the torsion cable-stayed Bridges, this paper discusses the objectives and principles of cable tension adjustment. The influence matrix method and the finite element analysis software midas civil 2012 of bridge structure are used to design the scheme. The cable adjustment scheme is developed by using the trial algorithm, and the cable adjustment effect is analyzed. Firstly, influence matrix method was used to analyze the mutual influence degree between adjacent cables. Then the adjusting value of cable force is calculated by iteration until convergence. Input the adjustment values of each step into the finite element analysis software to analyze the adjustment process and results The whole bridge is monitored and measured in the course of cable adjustment. The monitoring results show that the cable force is close to the target value after the adjustment of the cable force. The alignment of bridge deck after adjustment is also in good agreement with the design, and the deflection of tower top is improved. This practice will provide a more important reference for similar project.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Cable Force Adjustment of Torsion Cable-Stayed Bridge
    AU  - Li Cai
    Y1  - 2018/09/19
    PY  - 2018
    N1  - https://doi.org/10.11648/j.jccee.20180304.12
    DO  - 10.11648/j.jccee.20180304.12
    T2  - Journal of Civil, Construction and Environmental Engineering
    JF  - Journal of Civil, Construction and Environmental Engineering
    JO  - Journal of Civil, Construction and Environmental Engineering
    SP  - 106
    EP  - 110
    PB  - Science Publishing Group
    SN  - 2637-3890
    UR  - https://doi.org/10.11648/j.jccee.20180304.12
    AB  - Cable force adjustment of cable-stayed bridge has been a hotspot. The structure of the cable-stayed bridge is more complicated, and its cable force adjustment method is also difficult. In order to explore the reasonable method to adjust the cable force of the torsion cable-stayed Bridges, this paper discusses the objectives and principles of cable tension adjustment. The influence matrix method and the finite element analysis software midas civil 2012 of bridge structure are used to design the scheme. The cable adjustment scheme is developed by using the trial algorithm, and the cable adjustment effect is analyzed. Firstly, influence matrix method was used to analyze the mutual influence degree between adjacent cables. Then the adjusting value of cable force is calculated by iteration until convergence. Input the adjustment values of each step into the finite element analysis software to analyze the adjustment process and results The whole bridge is monitored and measured in the course of cable adjustment. The monitoring results show that the cable force is close to the target value after the adjustment of the cable force. The alignment of bridge deck after adjustment is also in good agreement with the design, and the deflection of tower top is improved. This practice will provide a more important reference for similar project.
    VL  - 3
    IS  - 4
    ER  - 

    Copy | Download

  • Sections