Regulation and Thermal Compensation of Continuous Forced Convection Indirect Solar Dryer for the Drying of Agricultural Products: Maize, Mahogany Nuts, Shea Nuts, By-products Derived from the Processing of Mango
Volume 3, Issue 2, December 2019, Pages: 119-124
Received: Jul. 13, 2019;
Accepted: Aug. 14, 2019;
Published: Sep. 18, 2019
Views 197 Downloads 48
Madjoyogo Herve Sirima, Mechanization Department, Institute of Research in Applied and Technological Sciences, National Center for Scientific and Technological Research, Ouagadougou, Burkina Faso
Betaboale Naon, Study and Research Group in Mechanics, Energetics and Industrial Technics, University Institute of Technology, Nazi Boni University, Bobo – Dioulasso, Burkina Faso
Paul Wambua, Industrial Engineering Department, Distant Production House University, Kigali, Rwanda
Follow on us
In this work; we were interested in the respect of the drying parameters, namely the recommended temperature range and the extraction of the moisture content during the drying of maize, mahogany nuts, shea nuts or by-products resulting from the processing of the mango. The thermal analysis of the drying system leads us to develop a system of regulation and thermal compensation in order to avoid the calcinations of the finished product and to respect the physicochemical parameters of the material. It must be emphasized that there are several agricultural products and their physicochemical parameters are not the same. Therefore the temperature ranges will be selected from the control system and compensation while taking into account the quality of said products. Note also that this study is conducted in a Sahelian country where sunshine is important and it becomes interesting to proceed to a regulation and a thermal compensation. To do this, we designed the control system and thermal compensation while taking into account the drying temperature.
Thermal Regulation, Thermal Compensation, Solar Drying, Agricultural Products and by-Products, Temperature, Humidity
To cite this article
Madjoyogo Herve Sirima,
Regulation and Thermal Compensation of Continuous Forced Convection Indirect Solar Dryer for the Drying of Agricultural Products: Maize, Mahogany Nuts, Shea Nuts, By-products Derived from the Processing of Mango, Applied Engineering.
Vol. 3, No. 2,
2019, pp. 119-124.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
IFM electronic 7844X Made in Germany Edition 2, 2011, 311 pages.
Reports of the 2015, 2016, 2017 year campaigns of the Tropical Fruit Transformation Society "DAFANIS. A.", 376 pages.
(Mopate and Koussou 2003, MRA 2007, Kiendrebeogo 2008, Mopate and al., 2011), Production processes of unconventional food for pigs based on mango waste and determination of their food values in Burkina Faso;38 pages.
Francis COURTOIS ENSIA Engineer on "IMPROVING AGROINDUSTRIAL QUALITY OF MAIZE BY DYNAMIC DRYING MODELING", Ph.D. Thesis of the National School of Food and Agricultural Industries (ENSIA), 27 September 1991, 102 pages.
Bouadel-Taounate-Morocco: "GUIDE TO THE MANUFACTURER OF HYBRID DRYER", 2005, 26 pages.
BENAOUDA. N, BENHAMOU. A, BIDDARI. A, ABDELLAOUI. M, BELHAMEL. M: "Design, realization and experimentation of a partially solar-heated dryer operating in forced convection "Laboratory of Thermal Development Center of Renewable Energies Observatory Route BP62 Bouzaréah, Algiers ALGERIA 2001, 7 pages.
S. Ould Amrouche and N. Benaouda Division Solar Power Photovoltaic D Solar Thermal Division and Geothermal Energy Renewable Energy Development Center BP 62, Observatory Road, Bouzaréah, Algiers, Algeria «Control system of asolardryer for aromatic and medicinal plants» Renewable Energies Review SMSTS'08 Algiers (2008) 221-228, 8 pages.
C. HAZARD Memotech industrial drawing, Casteilla edition, Paris 2003, 432 Pages.
D. Cogniel, F. Castellazzi, Y. Gangloff, Memotech Industrial Maintenance, Casteilla edition, Paris 2003, 331 pages.
P. Drexler, H. Faatz, F. Feicht, H. Geis (Dr. Ing.), J. Morlok (Dr. Ing.) And E. Wiesmann, Study and Design of Hydraulic Facilities, ed. Mannesmann Rexroth GmbH, Lohram Main/Federal Republic of Germany (FRG), 1988; 337 pages.
Spirax Sarco Worldclass-Worldwide (Sizing Fluidic Circuits); 25 pages.
Gilles ZWINGELSTEIN Dependability of complex systems; 32 pages.
Legrand, Products and systems for electrical and digital building infrastructures, CATALOG 2012, 964 pages.