Manufacturing Biofuel Briquettes from Industrial Sludge

Ing–Jia Chiou; I–Tsung Wu

doi:doi:10.11648/j.ijsdr.20160205.11

| Peer-Reviewed

Manufacturing Biofuel Briquettes from Industrial Sludge

Ing–Jia Chiou, I–Tsung Wu

Published in International Journal of Sustainable Development Research (Volume 2, Issue 4)

Received: 15 September 2016 Accepted: 5 November 2016 Published: 9 December 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Based on differences in the internal organization and thermal characteristics of industrial sludge, the main heat source or cementing agent is provided during the manufacture of biofuel briquettes. This study thus discusses the producibility and flammability of biofuel briquettes, and proposes the optimal formula for producing biofuel briquettes from industrial sludge. The experimental results demonstrated that food processing sludge and sewage sludge can offer excellent calorific value, combustion rate and flame temperature. Moreover, pulp sludge and sewage sludge can provide cementing properties. The four industrial sludge, including food processing sludge, pulp sludge, textile sludge and sewage sludge, can reach the surface combustion stage at 83°C, and can begin stable burning at 177–247°C. The corresponding temperature of maximum weight loss is 250–351°C. Considering the manufacturability, stability and combustion characteristics of biofuel briquettes produced from industrial sludge, the recommended appropriate additions of food processing sludge, pulp sludge, textile sludge and sewage sludge are 30–50%, 20–50%, 20–30% and 30–40% of the total mixture, respectively.

Published in	International Journal of Sustainable Development Research (Volume 2, Issue 4)
DOI	10.11648/j.ijsdr.20160205.11
Page(s)	18-25
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Sludge, Optimized Formula, Biofuel Briquettes, Formability, Combustion

References

[1]	Yaman, S., Şahan, M., Haykiri-açma, H., Şeşen, K., Küçükbayrak, S., 2000. Production of fuel briquettes from olive refuse and paper mill waste. Fuel Process. Technol. 68 (1), 23–31.
[2]	Li, Y., Liu, H., Zhang, O., 2001. High-pressure compaction of municipal solid waste to form densified fuel. Fuel Process. Technol. 74 (2), 81–91.
[3]	Mani, S., Tabil, L. G., Sokhansanj, S., 2004. Grinding performance and physical properties of wheat and barley straws, corn stover and switchgrass. Biomass and Bioenergy. 27 (4), 339–352.
[4]	Mani, S., Tabil, L. G., Sokhansanj, S., 2006. Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses. Biomass and Bioenergy. 30 (7), 648–654.
[5]	Chou, C. S., Lin, S. H., Lu, W. C., 2009. Preparation and characterization of solid biomass fuel made from rice straw and rice bran. Fuel Process. Technol. 90 (7–8), 980–987.
[6]	Wan, H. P., Cheng, Y. H., Chien, H. C., Lee, H. T., Huang, C. C., 2008. Emissions during co–firing of RDF-5 with bituminous coal paper sludge and waste tires in a commercial circulating fluidized bed co–generation boiler. Fuel. 87 (6), 761–767.
[7]	Chyang, C. S., Han, Y. L., Wu, L. W., Wan, H. P., Lee, H. T., Chang, Y. H. 2010. An investigation on pollutant emissions from co–firing of RDF and coal. Waste Manag. 30 (7), 1334–1340.
[8]	Lee, J. M., Kim, D. W., Kim, J. S., Geol, J., Lee, N. S. H., 2010. Co-combustion of refuse derived fuel with Korean Anthracite in a commercial circulating fluidized bed boiler. Energy. 35 (7), 2814–2818.
[9]	Chiou, I. J., Chen, C. H., Lin, Y. S., 2014. Combustion Behavior and Optimal Proportion of Industrial Sludge-Derived Fuels. Environmental Progress and Sustainable Energy. 33 (3), 1000–1007.
[10]	Chen, S. W., Chang, C. F., Shen, H. Y., Tsai, S. M., 2011. The characteristics of organic sludge/sawdust derived fuel. Bioresource Technol. 102 (9), 5406–5410.
[11]	Chen, W. S., Lin, C. W., Chang, F. C., Lee, W. J., Wu, J. L., 2012. Utilization of spent activated carbon to enhance the combustion efficiency of organic sludge derived fuel. Bioresource Technol. 113–7, 73–77.
[12]	Wzorek, M., 2012. Characterisation of the properties of alternative fuels containing sewage sludge. Fuel Process. Technol. 104, 80–89.
[13]	Miranda, T., Arranz, I. J., Montero, I., Román, S., Rojas, V. C., Nogales, S., 2012. Characterization and combustion of olive pomace and forest residue pellets. Fuel Process. Technol. 103, 91–96.
[14]	Chang, F. C., Ko, C. H., Wu, J. Y., Wanga, H. P., Chen, W. S., 2013. Resource recovery of organic sludge as refuse derived fuel by fry-drying process. Bioresource Technol. 141, 240–244.
[15]	Hou, S. S., Chen, M. C., Lin, T. H., 2014. Experimental study of the combustion characteristics of densified refuse derived fuel (RDF-5) produced from oil sludge. Fuel. 116 (15), 201–207.
[16]	Rada, E. C., Andreottola, G., 2012. RDF/SRF: Which perspective for its future in the EU. Waste Manag. 32 (6), 1059-1060.
[17]	Virmond, E., De Sena, R. F., Albrecht, W., Althoff, C. A., Moreira, R. F. P. M., José, H. J., 2012. Characterisation of agroindustrial solid residues as biofuels and potential application in thermochemical processes. Waste Manag. 32 (10), 1952-1961.
[18]	Himawanto, D. A., Indarto, I., Saptoadi, H., Rohmat, T. A., 2013. Thermogravimetric analysis of single-particle RDF combustion. Modern Applied Science. 7 (11), 33–42.

Cite This Article

Plain Text BibTeX RIS

APA Style

Ing–Jia Chiou, I–Tsung Wu. (2016). Manufacturing Biofuel Briquettes from Industrial Sludge. International Journal of Sustainable Development Research, 2(4), 18-25. https://doi.org/10.11648/j.ijsdr.20160205.11

Copy | Download

ACS Style

Ing–Jia Chiou; I–Tsung Wu. Manufacturing Biofuel Briquettes from Industrial Sludge. Int. J. Sustain. Dev. Res. 2016, 2(4), 18-25. doi: 10.11648/j.ijsdr.20160205.11

Copy | Download

AMA Style

Ing–Jia Chiou, I–Tsung Wu. Manufacturing Biofuel Briquettes from Industrial Sludge. Int J Sustain Dev Res. 2016;2(4):18-25. doi: 10.11648/j.ijsdr.20160205.11

Copy | Download

@article{10.11648/j.ijsdr.20160205.11,
  author = {Ing–Jia Chiou and I–Tsung Wu},
  title = {Manufacturing Biofuel Briquettes from Industrial Sludge},
  journal = {International Journal of Sustainable Development Research},
  volume = {2},
  number = {4},
  pages = {18-25},
  doi = {10.11648/j.ijsdr.20160205.11},
  url = {https://doi.org/10.11648/j.ijsdr.20160205.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijsdr.20160205.11},
  abstract = {Based on differences in the internal organization and thermal characteristics of industrial sludge, the main heat source or cementing agent is provided during the manufacture of biofuel briquettes. This study thus discusses the producibility and flammability of biofuel briquettes, and proposes the optimal formula for producing biofuel briquettes from industrial sludge. The experimental results demonstrated that food processing sludge and sewage sludge can offer excellent calorific value, combustion rate and flame temperature. Moreover, pulp sludge and sewage sludge can provide cementing properties. The four industrial sludge, including food processing sludge, pulp sludge, textile sludge and sewage sludge, can reach the surface combustion stage at 83°C, and can begin stable burning at 177–247°C. The corresponding temperature of maximum weight loss is 250–351°C. Considering the manufacturability, stability and combustion characteristics of biofuel briquettes produced from industrial sludge, the recommended appropriate additions of food processing sludge, pulp sludge, textile sludge and sewage sludge are 30–50%, 20–50%, 20–30% and 30–40% of the total mixture, respectively.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Manufacturing Biofuel Briquettes from Industrial Sludge
AU  - Ing–Jia Chiou
AU  - I–Tsung Wu
Y1  - 2016/12/09
PY  - 2016
N1  - https://doi.org/10.11648/j.ijsdr.20160205.11
DO  - 10.11648/j.ijsdr.20160205.11
T2  - International Journal of Sustainable Development Research
JF  - International Journal of Sustainable Development Research
JO  - International Journal of Sustainable Development Research
SP  - 18
EP  - 25
PB  - Science Publishing Group
SN  - 2575-1832
UR  - https://doi.org/10.11648/j.ijsdr.20160205.11
AB  - Based on differences in the internal organization and thermal characteristics of industrial sludge, the main heat source or cementing agent is provided during the manufacture of biofuel briquettes. This study thus discusses the producibility and flammability of biofuel briquettes, and proposes the optimal formula for producing biofuel briquettes from industrial sludge. The experimental results demonstrated that food processing sludge and sewage sludge can offer excellent calorific value, combustion rate and flame temperature. Moreover, pulp sludge and sewage sludge can provide cementing properties. The four industrial sludge, including food processing sludge, pulp sludge, textile sludge and sewage sludge, can reach the surface combustion stage at 83°C, and can begin stable burning at 177–247°C. The corresponding temperature of maximum weight loss is 250–351°C. Considering the manufacturability, stability and combustion characteristics of biofuel briquettes produced from industrial sludge, the recommended appropriate additions of food processing sludge, pulp sludge, textile sludge and sewage sludge are 30–50%, 20–50%, 20–30% and 30–40% of the total mixture, respectively.
VL  - 2
IS  - 4
ER  -

Copy | Download

Author Information

Ing–Jia Chiou

Department of Environmental Technology and Management, Nanya Institute of Technology, Taiwan, ROC
I–Tsung Wu

Department of Environmental Technology and Management, Nanya Institute of Technology, Taiwan, ROC

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Ing–Jia Chiou, I–Tsung Wu. (2016). Manufacturing Biofuel Briquettes from Industrial Sludge. International Journal of Sustainable Development Research, 2(4), 18-25. https://doi.org/10.11648/j.ijsdr.20160205.11

Copy | Download

ACS Style

Ing–Jia Chiou; I–Tsung Wu. Manufacturing Biofuel Briquettes from Industrial Sludge. Int. J. Sustain. Dev. Res. 2016, 2(4), 18-25. doi: 10.11648/j.ijsdr.20160205.11

Copy | Download

AMA Style

Ing–Jia Chiou, I–Tsung Wu. Manufacturing Biofuel Briquettes from Industrial Sludge. Int J Sustain Dev Res. 2016;2(4):18-25. doi: 10.11648/j.ijsdr.20160205.11

Copy | Download

@article{10.11648/j.ijsdr.20160205.11,
  author = {Ing–Jia Chiou and I–Tsung Wu},
  title = {Manufacturing Biofuel Briquettes from Industrial Sludge},
  journal = {International Journal of Sustainable Development Research},
  volume = {2},
  number = {4},
  pages = {18-25},
  doi = {10.11648/j.ijsdr.20160205.11},
  url = {https://doi.org/10.11648/j.ijsdr.20160205.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijsdr.20160205.11},
  abstract = {Based on differences in the internal organization and thermal characteristics of industrial sludge, the main heat source or cementing agent is provided during the manufacture of biofuel briquettes. This study thus discusses the producibility and flammability of biofuel briquettes, and proposes the optimal formula for producing biofuel briquettes from industrial sludge. The experimental results demonstrated that food processing sludge and sewage sludge can offer excellent calorific value, combustion rate and flame temperature. Moreover, pulp sludge and sewage sludge can provide cementing properties. The four industrial sludge, including food processing sludge, pulp sludge, textile sludge and sewage sludge, can reach the surface combustion stage at 83°C, and can begin stable burning at 177–247°C. The corresponding temperature of maximum weight loss is 250–351°C. Considering the manufacturability, stability and combustion characteristics of biofuel briquettes produced from industrial sludge, the recommended appropriate additions of food processing sludge, pulp sludge, textile sludge and sewage sludge are 30–50%, 20–50%, 20–30% and 30–40% of the total mixture, respectively.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Manufacturing Biofuel Briquettes from Industrial Sludge
AU  - Ing–Jia Chiou
AU  - I–Tsung Wu
Y1  - 2016/12/09
PY  - 2016
N1  - https://doi.org/10.11648/j.ijsdr.20160205.11
DO  - 10.11648/j.ijsdr.20160205.11
T2  - International Journal of Sustainable Development Research
JF  - International Journal of Sustainable Development Research
JO  - International Journal of Sustainable Development Research
SP  - 18
EP  - 25
PB  - Science Publishing Group
SN  - 2575-1832
UR  - https://doi.org/10.11648/j.ijsdr.20160205.11
AB  - Based on differences in the internal organization and thermal characteristics of industrial sludge, the main heat source or cementing agent is provided during the manufacture of biofuel briquettes. This study thus discusses the producibility and flammability of biofuel briquettes, and proposes the optimal formula for producing biofuel briquettes from industrial sludge. The experimental results demonstrated that food processing sludge and sewage sludge can offer excellent calorific value, combustion rate and flame temperature. Moreover, pulp sludge and sewage sludge can provide cementing properties. The four industrial sludge, including food processing sludge, pulp sludge, textile sludge and sewage sludge, can reach the surface combustion stage at 83°C, and can begin stable burning at 177–247°C. The corresponding temperature of maximum weight loss is 250–351°C. Considering the manufacturability, stability and combustion characteristics of biofuel briquettes produced from industrial sludge, the recommended appropriate additions of food processing sludge, pulp sludge, textile sludge and sewage sludge are 30–50%, 20–50%, 20–30% and 30–40% of the total mixture, respectively.
VL  - 2
IS  - 4
ER  -

Copy | Download