Positive Streamer Simulation in Air Using Finite Element Method

Abd Elatif El-Zein; Mohamed Talaat; Ashraf Samir

doi:doi:10.11648/j.ajme.20170305.12

| Peer-Reviewed

Positive Streamer Simulation in Air Using Finite Element Method

Abd Elatif El-Zein, Mohamed Talaat, Ashraf Samir

Published in American Journal of Modern Energy (Volume 3, Issue 5)

Received: 20 August 2017 Accepted: 30 August 2017 Published: 26 September 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

A new methodology for positive streamer process is presented. This process depends on the critical electric field value that required for streamer initiation. So, an accurate computational of the electric field distribution across needle-to-plane gap is required. A finite element method using Comsol Multiphysics program is adopted for this simulation. The streamer path has been considered as a conducting path of 300 micro-meter in length and 30 micro-meter in radius with 10⁸ electrons on its head. The results have been verified with others.

Published in	American Journal of Modern Energy (Volume 3, Issue 5)
DOI	10.11648/j.ajme.20170305.12
Page(s)	95-100
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Positive Streamer, Critical Electric Field, Needle-to-Plane, Finite Element Method

References

[1]	J.-P. Borra, "Nucleation and aerosol processing in atmospheric pressure electrical discharges: powders production, coatings and filtration," Journal of Physics D: Applied Physics, vol. 39, p. R19, 2006.
[2]	A. Y. Starikovskii, N. B. Anikin, I. N. Kosarev, E. I. Mintoussov, M. M. Nudnova, A. E. Rakitin, et al., "Nanosecond-pulsed discharges for plasma-assisted combustion and aerodynamics," Journal of Propulsion and Power, vol. 24, pp. 1182-1197, 2008.
[3]	S. V. Pancheshnyi, D. A. Lacoste, A. Bourdon, and C. O. Laux, "Ignition of propane–air mixtures by a repetitively pulsed nanosecond discharge," IEEE Transactions on Plasma Science, vol. 34, pp. 2478-2487, 2006.
[4]	A. Kulikovsky, "Two-dimensional simulation of the positive streamer in N2 between parallel-plate electrodes," Journal of Physics D: Applied Physics, vol. 28, p. 2483, 1995.
[5]	W.-G. Min, H.-S. Kim, S.-H. Lee, and S.-Y. Hahn, "An investigation of FEM-FCT method for streamer corona simulation," IEEE transactions on magnetics, vol. 36, pp. 1280-1284, 2000.
[6]	X. Wang, F. Wang, W. Pfeiffer, and N. Kouzichine, "Simulation of Two-Dimensional Streamer Discharge in Uniform Field in Low SF 6 Content Mixtures," in Electrical Insulation, 2008. ISEI 2008. Conference Record of the 2008 IEEE International Symposium on, 2008, pp. 324-326.
[7]	M. N. Sadiku, Numerical techniques in electromagnetics 2nd ed.: CRC press, 2001.
[8]	H. MENGMIN, "Numerical Methods and Comparison for Simulating Long Streamer Propagation," 2014.
[9]	A. Peyda, "Numerical and experimental investigation to determine corona inception electric field for rod-plane electrode configuration," in Masters Abstracts International, 2006.
[10]	L. F. Fouad, M. Abdel-Salam, A. G. Zeitoun, and M. K. Gohar, "Performance Characteristics of Alpha-Particle Corona-Streamer Counter," IEEE Transactions on Industry Applications, pp. 510-515, 1978.
[11]	M. Abdel-Salam and M. El-Mohandes, "Combined method based on finite differences and charge simulation for calculating electric fields," IEEE Transactions on Industry Applications, vol. 25, pp. 1060-1066, 1989.
[12]	M. M. El-Bahy, "A numerical modelling of microdischarge threshold in uniform electric fields," Journal of Physics D: Applied Physics, vol. 38, p. 103, 2004.
[13]	M. El-Bahy, M. Abouelsaad, N. Abdel-Gawad, and M. Badawi, "Onset voltage of negative corona on stranded conductors," Journal of Physics D: Applied Physics, vol. 40, p. 3094, 2007.
[14]	M. Gaber, M. Trlep, and B. Štumberger, "Successful 3D simulation of branching streamer in air bridging the gap between main electrodes using charge simulation method," in Electromagnetic Field Computation (CEFC), 2010 14th Biennial IEEE Conference on, 2010, pp. 1-1.
[15]	L. Arevalo, V. Cooray, D. Wu, and B. Jacobson, "A new static calculation of the streamer region for long spark gaps," Journal of electrostatics, vol. 70, pp. 15-19, 2012.
[16]	M. Talaat, "Electrostatic field calculation in air gaps with a transverse layer of dielectric barrier," Journal of Electrostatics, vol. 72, pp. 422-427, 2014.
[17]	G. Georghiou, R. Morrow, and A. Metaxas, "Two-dimensional simulation of streamers using the FE-FCT algorithm," Journal of physics D: Applied physics, vol. 33, p. L27, 2000.
[18]	H.-J. Ju, H.-D. Hwang, J.-H. Park, and K.-C. Ko, "2-dimensional simulation of corona discharge using FEM-FCT method in wire-cylinder reactor," in Plasma Science, 2003. ICOPS 2003. IEEE Conference Record-Abstracts. The 30th International Conference on, 2003, p. 290.
[19]	O. Eichwald, O. Ducasse, D. Dubois, A. Abahazem, N. Merbahi, M. Benhenni, et al., "Experimental analysis and modelling of positive streamer in air: towards an estimation of O and N radical production," Journal of Physics D: Applied Physics, vol. 41, p. 234002, 2008.
[20]	A. Luque and U. Ebert, "Density models for streamer discharges: beyond cylindrical symmetry and homogeneous media," Journal of Computational Physics, vol. 231, pp. 904-918, 2012.
[21]	R. Morrow, "Theory of negative corona in oxygen," Physical Review A, vol. 32, p. 1799, 1985.
[22]	N. Aleksandrov and E. Bazelyan, "Simulation of long-streamer propagation in air at atmospheric pressure," Journal of Physics D: Applied Physics, vol. 29, p. 740, 1996.
[23]	V. Shveigert, "Ionization wave at streamer gas breakdown. Driftdiffusion approximation," Teplofiz. Vys. Temp, vol. 28, pp. 1056-1063, 1990.
[24]	A. Davies, C. Evans, and F. L. Jones, "Electrical breakdown of gases: the spatio-temporal growth of ionization in fields distorted by space charge," in Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 1964, pp. 164-183.
[25]	K. Yoshida and H. Tagashira, "Computer simulation of a nitrogen discharge at high overvoltages," Journal of Physics D: Applied Physics, vol. 9, p. 491, 1976.
[26]	R. Morrow, "Properties of streamers and streamer channels in SF 6," Physical Review A, vol. 35, p. 1778, 1987.
[27]	C. Zhuang and R. Zeng, "A local discontinuous Galerkin method for 1.5-dimensional streamer discharge simulations," Applied Mathematics and Computation, vol. 219, pp. 9925-9934, 2013.
[28]	I. Pub, "60-1, “High-voltage test techniques, Part 1: General definitions and test requirements”," International Electrotechnical Commission, International Standard, 1989.
[29]	Y. P. Raizer and J. E. Allen, Gas discharge physics vol. 2: Springer Berlin, 1991.
[30]	J. Qin and V. P. Pasko, "On the propagation of streamers in electrical discharges," Journal of Physics D: Applied Physics, vol. 47, p. 435202, 2014.
[31]	N. Allen and A. Ghaffar, "The conditions required for the propagation of a cathode-directed positive streamer in air," Journal of Physics D: Applied Physics, vol. 28, p. 331, 1995.
[32]	F. Bastien and E. Marode, "The determination of basic quantities during glow-to-arc transition in a positive point-to-plane discharge," Journal of Physics D: Applied Physics, vol. 12, p. 249, 1979.
[33]	A. Kulikovsky, "The role of photoionization in positive streamer dynamics," Journal of Physics D: Applied Physics, vol. 33, p. 1514, 2000.
[34]	D. Kind and H. Kärner, High-voltage insulation technology vol. 621: Springer, 1985.
[35]	W. H. Hayt and J. A. Buck, Engineering electromagnetics vol. 7: McGraw-Hill New York, 2001.
[36]	A. Fridman and L. A. Kennedy, Plasma physics and engineering: CRC press, 2004.
[37]	L. B. Loeb and J. M. Meek, "The mechanism of spark discharge in air at atmospheric pressure. I," Journal of Applied Physics, vol. 11, pp. 438-447, 1940.
[38]	H. Raether, "Electron avalanches and breakdown in gases," 1964.
[39]	G. Dawson and W. P. Winn, "A model for streamer propagation," Zeitschrift für Physik, vol. 183, pp. 159-171, 1965.
[40]	I. Gallimberti, "A computer model for streamer propagation," Journal of Physics D: Applied Physics, vol. 5, p. 2179, 1972.
[41]	A. Gibert and F. Bastien, "Fine structure of streamers," Journal of Physics D: Applied Physics, vol. 22, p. 1078, 1989.

Cite This Article

Plain Text BibTeX RIS

APA Style

Abd Elatif El-Zein, Mohamed Talaat, Ashraf Samir. (2017). Positive Streamer Simulation in Air Using Finite Element Method. American Journal of Modern Energy, 3(5), 95-100. https://doi.org/10.11648/j.ajme.20170305.12

Copy | Download

ACS Style

Abd Elatif El-Zein; Mohamed Talaat; Ashraf Samir. Positive Streamer Simulation in Air Using Finite Element Method. Am. J. Mod. Energy 2017, 3(5), 95-100. doi: 10.11648/j.ajme.20170305.12

Copy | Download

AMA Style

Abd Elatif El-Zein, Mohamed Talaat, Ashraf Samir. Positive Streamer Simulation in Air Using Finite Element Method. Am J Mod Energy. 2017;3(5):95-100. doi: 10.11648/j.ajme.20170305.12

Copy | Download

@article{10.11648/j.ajme.20170305.12,
  author = {Abd Elatif El-Zein and Mohamed Talaat and Ashraf Samir},
  title = {Positive Streamer Simulation in Air Using Finite Element Method},
  journal = {American Journal of Modern Energy},
  volume = {3},
  number = {5},
  pages = {95-100},
  doi = {10.11648/j.ajme.20170305.12},
  url = {https://doi.org/10.11648/j.ajme.20170305.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajme.20170305.12},
  abstract = {A new methodology for positive streamer process is presented. This process depends on the critical electric field value that required for streamer initiation. So, an accurate computational of the electric field distribution across needle-to-plane gap is required. A finite element method using Comsol Multiphysics program is adopted for this simulation. The streamer path has been considered as a conducting path of 300 micro-meter in length and 30 micro-meter in radius with 108 electrons on its head. The results have been verified with others.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Positive Streamer Simulation in Air Using Finite Element Method
AU  - Abd Elatif El-Zein
AU  - Mohamed Talaat
AU  - Ashraf Samir
Y1  - 2017/09/26
PY  - 2017
N1  - https://doi.org/10.11648/j.ajme.20170305.12
DO  - 10.11648/j.ajme.20170305.12
T2  - American Journal of Modern Energy
JF  - American Journal of Modern Energy
JO  - American Journal of Modern Energy
SP  - 95
EP  - 100
PB  - Science Publishing Group
SN  - 2575-3797
UR  - https://doi.org/10.11648/j.ajme.20170305.12
AB  - A new methodology for positive streamer process is presented. This process depends on the critical electric field value that required for streamer initiation. So, an accurate computational of the electric field distribution across needle-to-plane gap is required. A finite element method using Comsol Multiphysics program is adopted for this simulation. The streamer path has been considered as a conducting path of 300 micro-meter in length and 30 micro-meter in radius with 108 electrons on its head. The results have been verified with others.
VL  - 3
IS  - 5
ER  -

Copy | Download

Author Information

Abd Elatif El-Zein

Electrical Power & Machines Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt
Mohamed Talaat

Electrical Power & Machines Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt
Ashraf Samir

Electrical Power & Machines Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Abd Elatif El-Zein, Mohamed Talaat, Ashraf Samir. (2017). Positive Streamer Simulation in Air Using Finite Element Method. American Journal of Modern Energy, 3(5), 95-100. https://doi.org/10.11648/j.ajme.20170305.12

Copy | Download

ACS Style

Abd Elatif El-Zein; Mohamed Talaat; Ashraf Samir. Positive Streamer Simulation in Air Using Finite Element Method. Am. J. Mod. Energy 2017, 3(5), 95-100. doi: 10.11648/j.ajme.20170305.12

Copy | Download

AMA Style

Abd Elatif El-Zein, Mohamed Talaat, Ashraf Samir. Positive Streamer Simulation in Air Using Finite Element Method. Am J Mod Energy. 2017;3(5):95-100. doi: 10.11648/j.ajme.20170305.12

Copy | Download

@article{10.11648/j.ajme.20170305.12,
  author = {Abd Elatif El-Zein and Mohamed Talaat and Ashraf Samir},
  title = {Positive Streamer Simulation in Air Using Finite Element Method},
  journal = {American Journal of Modern Energy},
  volume = {3},
  number = {5},
  pages = {95-100},
  doi = {10.11648/j.ajme.20170305.12},
  url = {https://doi.org/10.11648/j.ajme.20170305.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajme.20170305.12},
  abstract = {A new methodology for positive streamer process is presented. This process depends on the critical electric field value that required for streamer initiation. So, an accurate computational of the electric field distribution across needle-to-plane gap is required. A finite element method using Comsol Multiphysics program is adopted for this simulation. The streamer path has been considered as a conducting path of 300 micro-meter in length and 30 micro-meter in radius with 108 electrons on its head. The results have been verified with others.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Positive Streamer Simulation in Air Using Finite Element Method
AU  - Abd Elatif El-Zein
AU  - Mohamed Talaat
AU  - Ashraf Samir
Y1  - 2017/09/26
PY  - 2017
N1  - https://doi.org/10.11648/j.ajme.20170305.12
DO  - 10.11648/j.ajme.20170305.12
T2  - American Journal of Modern Energy
JF  - American Journal of Modern Energy
JO  - American Journal of Modern Energy
SP  - 95
EP  - 100
PB  - Science Publishing Group
SN  - 2575-3797
UR  - https://doi.org/10.11648/j.ajme.20170305.12
AB  - A new methodology for positive streamer process is presented. This process depends on the critical electric field value that required for streamer initiation. So, an accurate computational of the electric field distribution across needle-to-plane gap is required. A finite element method using Comsol Multiphysics program is adopted for this simulation. The streamer path has been considered as a conducting path of 300 micro-meter in length and 30 micro-meter in radius with 108 electrons on its head. The results have been verified with others.
VL  - 3
IS  - 5
ER  -

Copy | Download