American Journal of Nanosciences

| Peer-Reviewed |

Study the Effect of Polycarbonate Superhydrophobic Nanocomposite on Antibacterial Activity

Received: 31 August 2018    Accepted: 25 September 2018    Published: 23 October 2018
Views:       Downloads:

Share This Article

Abstract

A superhydrophobic and antibacterial surface on a glass substrate was fabricated by One-step phase separation method using the polycarbonate polymer and solvent \ non- solvent. The resulting surfaces showed a static water contact angle (CA) of 154° and excellent inhibition percentage of Pseudomonas aeruginosa bacteria. FESEM showed that the surface structure comprised branches or petals outside the "plant seabed's" formation, in addition to related AgNps and Ag with a rough structure. In order to test the stability, bacteria suspensions were poured above the surface and allowed to settle on top of the surface for several minutes, then, an Anti-adhesive effect of colonies bacteria evaluated with a very small percentage of bacteria adhesive on surfaces. This preparation method is advantageous as it does not require complicated or high-cost materials and is environmentally friendly and highly efficient.

DOI 10.11648/j.ajn.20180401.11
Published in American Journal of Nanosciences (Volume 4, Issue 1, March 2018)
Page(s) 1-6
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Pseudomonas Aeruginosa, AgNps, Ag, Acetone, Dmf, Superhydrophobic, Polycarbonate, Rough Structure

References
[1] Bardajee, G. R., Hooshyar, Z., Rezanezhad, H., A novel and green biomaterial based silver nanocomposite hydrogel: synthesis, characterization and antibacterial effect. J. Inorg. Biochem., 2012; 117:367–373.
[2] Yeo SY, Jeong SH, Preparation and characterization of polypropylene/ silver nanocomposite fibers. Polymer International, 2003; 52: 1053–1057.
[3] Maki DG, Tambyah PA, Engineering Out the Risk of Infection with Urinary Catheters. Emerging Infectious Diseases, 2001; 7: 342–347.
[4] Lansdown AB, Silver L., Its antibacterial properties and mechanism of action. Journal of Wound Care, 2002; 11: 125–130.
[5] Delpech MC, Coutinho FMB, Habibe MES. Bisphenol A-based polycarbonates: characterization of commercial samples. Polymer Test. 2002; 21(2):155–161.
[6] Balart R, Sánchez L, López J, et al. Kinetic analysis of thermal degradation of recycled polycarbonate/acrylonitrile–butadiene–styrene mixtures from waste electric and electronic equipment. Polym Degrad Stab. 2006; 91(3):527–534.
[7] Schulz U. Review of modern techniques to generate antireflective properties on thermoplastic polymers. Appl Opt. 2006; 45(7):1608–1618.
[8] Cassie ABD, Baxter S. Wettability of porous surfaces. Trans Faraday Soc. 1944; 40:546–551.
[9] Wolfs M, Darmanin T, Guittard F. Superhydrophobic fibrous polymers. Polym Rev. 2013; 53(3):460–505.
[10] Honary S, Ghajar K, Khazaeli P, et al. Preparation, characterization and antibacterial properties of silver-chitosan nanocomposites using different molecular weight grades of chitosan. Trop J Pharm Res. 2011; 10(1):69–74.
[11] Li S-M, Jia N, Zhu J-F, et al. Rapid microwave-assisted preparation and characterization of cellulose silver nanocomposites. Carbohydr Polym. 2011; 83(2):422–429.
[12] Prucek R, Tuček J, Kilianová M, et al. The targeted antibacterial and antifungal properties of magnetic nanocomposite of iron oxide and silver nanoparticles. Biomaterials. 2011; 32(21):4704– 4713.
[13] P. Jankowski, D. Ogonczyk, A. Kosinski, W. Lisowski, P. Garstecki, “Hydrophobic modification of polycarbonate for reproducible and stable formation of biocompatible microparticles”, Lab Chip, 2011; 11:748–752.
[14] Vividha Dhapte, Namrata Gaikwad, Priyesh V. More, Shaibal Banerjee, Vishwas V. Dhapte, Shivajirao Kadam & Pawan K. Khanna, Transparent ZnO/polycarbonate nanocomposite for food packaging application, Nanocomposites, 2015; 1(2):106-112.
[15] Mathee K, Narasimhan G, Valdes C, Qiu X, Matewish JM, Koehrsen M, Rokas A, Yandava CN, Engels R, Zeng E, Olavarietta R, Doud M, Smith RS, Montgomery P, White JR, Godfrey PA, Kodira C, Birren B, Galagan JE, Lory S, “Dynamics of Pseudomonas aeruginosa genome evolution”, Proc. Natl. Acad. Sci. U.S.A. (2008).
[16] Loo CY, Young PM, Lee WH, Cavaliere R, Whitchurch CB, and Rohanizadeh R. Loo CY, "Superhydrophobic, nanotextured polyvinyl chloride films for delaying Pseudomonas aeruginosa attachment to intubation tubes and medical plastics", Acta Biomater., 2012; 8(5):1881-90.
[17] Gianluigi Franci, Annarita Falanga, Stefania Galdiero, Luciana Palomba, Mahendra Rai, Giancarlo Morelli and Massimiliano Galdiero, “Silver Nanoparticles as Potential Antibacterial Agents”, Molecules, 2015; 20: 8856-8874.
Author Information
  • Physics Department, College of Science, Al-Mustansiriyah University, Baghdad, Iraq

  • Physics Department, College of Science, Al-Mustansiriyah University, Baghdad, Iraq

Cite This Article
  • APA Style

    Muntadher Ismaiel Rahmah, Raad Saadon Sabry. (2018). Study the Effect of Polycarbonate Superhydrophobic Nanocomposite on Antibacterial Activity. American Journal of Nanosciences, 4(1), 1-6. https://doi.org/10.11648/j.ajn.20180401.11

    Copy | Download

    ACS Style

    Muntadher Ismaiel Rahmah; Raad Saadon Sabry. Study the Effect of Polycarbonate Superhydrophobic Nanocomposite on Antibacterial Activity. Am. J. Nanosci. 2018, 4(1), 1-6. doi: 10.11648/j.ajn.20180401.11

    Copy | Download

    AMA Style

    Muntadher Ismaiel Rahmah, Raad Saadon Sabry. Study the Effect of Polycarbonate Superhydrophobic Nanocomposite on Antibacterial Activity. Am J Nanosci. 2018;4(1):1-6. doi: 10.11648/j.ajn.20180401.11

    Copy | Download

  • @article{10.11648/j.ajn.20180401.11,
      author = {Muntadher Ismaiel Rahmah and Raad Saadon Sabry},
      title = {Study the Effect of Polycarbonate Superhydrophobic Nanocomposite on Antibacterial Activity},
      journal = {American Journal of Nanosciences},
      volume = {4},
      number = {1},
      pages = {1-6},
      doi = {10.11648/j.ajn.20180401.11},
      url = {https://doi.org/10.11648/j.ajn.20180401.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajn.20180401.11},
      abstract = {A superhydrophobic and antibacterial surface on a glass substrate was fabricated by One-step phase separation method using the polycarbonate polymer and solvent \ non- solvent. The resulting surfaces showed a static water contact angle (CA) of 154° and excellent inhibition percentage of Pseudomonas aeruginosa bacteria. FESEM showed that the surface structure comprised branches or petals outside the "plant seabed's" formation, in addition to related AgNps and Ag with a rough structure. In order to test the stability, bacteria suspensions were poured above the surface and allowed to settle on top of the surface for several minutes, then, an Anti-adhesive effect of colonies bacteria evaluated with a very small percentage of bacteria adhesive on surfaces. This preparation method is advantageous as it does not require complicated or high-cost materials and is environmentally friendly and highly efficient.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Study the Effect of Polycarbonate Superhydrophobic Nanocomposite on Antibacterial Activity
    AU  - Muntadher Ismaiel Rahmah
    AU  - Raad Saadon Sabry
    Y1  - 2018/10/23
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ajn.20180401.11
    DO  - 10.11648/j.ajn.20180401.11
    T2  - American Journal of Nanosciences
    JF  - American Journal of Nanosciences
    JO  - American Journal of Nanosciences
    SP  - 1
    EP  - 6
    PB  - Science Publishing Group
    SN  - 2575-4858
    UR  - https://doi.org/10.11648/j.ajn.20180401.11
    AB  - A superhydrophobic and antibacterial surface on a glass substrate was fabricated by One-step phase separation method using the polycarbonate polymer and solvent \ non- solvent. The resulting surfaces showed a static water contact angle (CA) of 154° and excellent inhibition percentage of Pseudomonas aeruginosa bacteria. FESEM showed that the surface structure comprised branches or petals outside the "plant seabed's" formation, in addition to related AgNps and Ag with a rough structure. In order to test the stability, bacteria suspensions were poured above the surface and allowed to settle on top of the surface for several minutes, then, an Anti-adhesive effect of colonies bacteria evaluated with a very small percentage of bacteria adhesive on surfaces. This preparation method is advantageous as it does not require complicated or high-cost materials and is environmentally friendly and highly efficient.
    VL  - 4
    IS  - 1
    ER  - 

    Copy | Download

  • Sections