Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation

Md. Shirazul Hoque Mollah; Md. Shahidul Alam; Md. Abdul Alim

doi:doi:10.11648/j.ijtam.20190503.12

| Peer-Reviewed

Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation

Md. Shirazul Hoque Mollah, Md. Shahidul Alam, Md. Abdul Alim

Published in International Journal of Theoretical and Applied Mathematics (Volume 5, Issue 3)

Received: 9 August 2019 Accepted: 18 September 2019 Published: 9 October 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Free convection flow and heat transfer in a rectangular cavity with heated triangle and internal heat generation is investigated numerically. A finite element analysis is performed to investigate the effects of uniform heating and is also used for solving the Navier-Stokes and Energy balance equations. The horizontal bottom wall is divided into three equal sections. The middle section of the horizontal bottom wall, bottom side of the triangle and left vertical left wall in the enclosure were kept temperature at T_h. The other two parts of the horizontal bottom wall and the other two sides of the triangle were kept thermal insulation while the right vertical walls and the top wall of the cavity were maintained constant temperature T_c with T_h>T_c. The physical problems are represented mathematically by different sets of governing equations along with corresponding boundary conditions. The dimensionless Parameters in the equations are performed for Heat generation (λ), Rayleigh number (Ra) and Prandtl number (Pr). The streamlines, isotherms, average Nusselt number, velocity profiles and temperature distribution of the fluid in the enclosure are presented graphically. The numerical results indicate that the Heat Generation and Rayleigh number have strong influence on the streamlines and isotherms. Also the mentioned parameters have significant effect on average Nusselt number at the hot wall and average temperature of the fluid in the enclosure.

Published in	International Journal of Theoretical and Applied Mathematics (Volume 5, Issue 3)
DOI	10.11648/j.ijtam.20190503.12
Page(s)	44-56
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Finite Element Method, Heat Generation, Numerical Simulation, Natural Convection, Rectangle Cavity

References

[1]	A. K. Hussein, "Finite Volume Simulation of Natural Convection in a Trapezoidal Cavity Filled with Various Fluids and Heated from the Top Wall" Universal Journal of Fluid Mechanics 1, pp 24-36, 2013.
[2]	A. K. Azad, M. J. H. Munshi, M. M Rahman andM. K Chowdhury, "Analysis of Combined Convection in an Open Cavity under Constant Heat Flux Boundary Conditions and Magnetic Field Using Finite Element Method," Journal of scientific research, vol. 6 (2), pp243-256, 2014.
[3]	M. Bouabid, N. Hidouri, M. Magherbi, A. Eljery and A. Ben Brahim, "Irreversibility investigation on MHD natural convection in a square cavity for different Prandtl numbers" World Journal of Engineering and physical Sciences Vol. 2 (4), pp. 060-075, 2014.
[4]	A. K. Hussein, S. Kumar Rout, F. Fathinia, R. Chand, and M. H. Mohammed, "Natural convection in a triangular top wall enclosure with a solid strip" Journal of Engineering Science and Technology, Vol. 10, No. 10, pp 1326-1341, 2015.
[5]	R. Chowdhury, M. A. Hakim Khan, and M. N. A. Alam Siddiki, "Natural Convection in Porous Triangular Enclosure with a Circular Obstacle in Presence of Heat Generation” Vol. 3 (2), pp 51-58, 2015.
[6]	S Z. Nejad, and M. M. Keshtkar, "Entropy Generation Analysis of Natural Convection in Square Enclosures with Two Isoflux Heat Source", Engineering Technology & Applied Science Research Vol. 7, No. 2, Pp1486-1495, 2017.
[7]	A. F. Khudheyer, “MHD Mixed Convection in Double Lid- Driven Differentially Heated Trapezoidal Cavity,” International Journal of Application or Innovation in Engineering & Management Vol. 4, Issue 2, February 2015.
[8]	A. Aghaei, A. A. Abbasian Arani and F. Abedi, “Analysis of magnetic field effects on distributed heat sources in a nanofluid-filled enclosure by natural convection,” Journal of Applied Fluid Mechanics, Vol. 9, No. 3, pp. 1175-1187, May 2016.
[9]	T. Basak, S. Roy and I. Pop, “Heat flow analysis for natural convection within trapezoidal enclosures based on heatline concept,” Int. J. Heat Mass Transfer, Vol. 52, Issue 11-12, pp. 2471-2483, May 2009.
[10]	S. Jani, M. Mahmoodi, and M. Amini, "Magneto hydrodynamic Free Convection in a Square Cavity Heated from Below and Cooled from Other Walls," International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 7, No. 4, 2013.
[11]	M. S. Alam, M. S. H. Mollah, and M. A. Alim, "Finite Element Analysis of Natural Convection in a Rectangular Cavity and Partially Heated Wall", Engineering and Applied Sciences, Vol. 2, No. 3, pp. 53-58, 2017.
[12]	M. S. Alam, M. S. Alam, M. A. Alim, and M. S. H. Mollah, "Numerical Simulation of Natural Convection in a Rectangular Cavity with Triangles of Different Orientation in Presence of Magnetic Field," AIP Conference Proceedings 1851, 020037 doi: 10.1063/1.4984666, 2017.
[13]	M. S. Alam, M. S. Alam, M. S. H. Mollah, A. H. Bhuiyan and M. A. Alim, "Numerical Simulation of Natural Convection in a Rectangular Cavity with Corner Heater in Presence of Magnetic Field," Journal of Computer and Mathematical Sciences, Vol. 8, No. 6, pp 215-225, June 2017.
[14]	M. S. Alam, M. S. Alam, M. S. H. Mollah, and M. A. Alim, “Effect of Prandtl Number on Magneto-Convection in a Lid Driven Square Cavity with a Sinusoidal Vertical Wall", Journal of Multidisciplinary Engineering Science Studies, Vol. 3 Issue 8, August-2017Journal of Multidisciplinary Engineering Science Studies, Vol. 3 Issue 8, 2017.
[15]	M. S. Alam, M. S. Alam, M. A. Alim, and M. S. H. Mollah "Mixed Magneto Convection in a Lid Driven Square Enclosure with a Sinusoidal Vertical Wall and Joule Heating,", Available online at www.sciencedirect.com1877-7058 © 2017 doi 10.1016/j.proeng.2017.08.172, 2017.
[16]	A. B. Halim, M. A. Alim and M. U. Nasir “Effect of Hartmann Number on Free Convective Flow in a Square Cavity with Different Positions of Heated Square Block”, World Academy of Science, Engineering and Technology International Journal of Mathematical, Computational, Physical, Electrical and Computer Engineering Vol. 8, No. 2, (2014).
[17]	M. M. Ali, M. A. Alim and Syed Sabbir Ahmed, Magneto hydrodynamics mixed convection flow in a hexagonal enclosure Procedia Engineering, 194, 479-486 (2017).
[18]	M. M. Ali, M. A. Alim, M. A. Maleque, and Syed Sabbir Ahmed, Numerical simulation of MHD free convection flow in a differentially heated square enclosure with tilted obstacle, AIP Conference Proceedings 1851, 020055 (2017); doi: 10.1063/1.4984684.
[19]	Aysharjya Sarkar, M. A. Alim, M. Jahirul Haque Munshi, and M. M. Ali, Numerical study on MHD mixed convection in a lid driven cavity with a wavy top wall and rectangular heaters at the bottom, AIP Conference Proceedings 2121, 030004 (2019) https://doi.org/10.1063/1.5115849.
[20]	Md. Imran Hossain, M. A. Maleque, and Mohammad Mokaddes Ali, Numerical study of magneto hydrodynamicmixed convection in a partially heated rectangular enclosure with elliptic block, AIP Conference Proceedings 2121, 030010 (2019); https://doi.org/10.1063/1.5115855.
[21]	B. Xu, B. Q. Li and D. E. Stock "An experimental study of thermally induced convection of molten gallium in magnetic fields" International Journal of Heat and Mass Transfer Vol. 49, Pp 2009–2019, 2006.

Cite This Article

Plain Text BibTeX RIS

APA Style

Md. Shirazul Hoque Mollah, Md. Shahidul Alam, Md. Abdul Alim. (2019). Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation. International Journal of Theoretical and Applied Mathematics, 5(3), 44-56. https://doi.org/10.11648/j.ijtam.20190503.12

Copy | Download

ACS Style

Md. Shirazul Hoque Mollah; Md. Shahidul Alam; Md. Abdul Alim. Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation. Int. J. Theor. Appl. Math. 2019, 5(3), 44-56. doi: 10.11648/j.ijtam.20190503.12

Copy | Download

AMA Style

Md. Shirazul Hoque Mollah, Md. Shahidul Alam, Md. Abdul Alim. Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation. Int J Theor Appl Math. 2019;5(3):44-56. doi: 10.11648/j.ijtam.20190503.12

Copy | Download

@article{10.11648/j.ijtam.20190503.12,
  author = {Md. Shirazul Hoque Mollah and Md. Shahidul Alam and Md. Abdul Alim},
  title = {Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation},
  journal = {International Journal of Theoretical and Applied Mathematics},
  volume = {5},
  number = {3},
  pages = {44-56},
  doi = {10.11648/j.ijtam.20190503.12},
  url = {https://doi.org/10.11648/j.ijtam.20190503.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijtam.20190503.12},
  abstract = {Free convection flow and heat transfer in a rectangular cavity with heated triangle and internal heat generation is investigated numerically. A finite element analysis is performed to investigate the effects of uniform heating and is also used for solving the Navier-Stokes and Energy balance equations. The horizontal bottom wall is divided into three equal sections. The middle section of the horizontal bottom wall, bottom side of the triangle and left vertical left wall in the enclosure were kept temperature at Th. The other two parts of the horizontal bottom wall and the other two sides of the triangle were kept thermal insulation while the right vertical walls and the top wall of the cavity were maintained constant temperature Tc with Th>Tc. The physical problems are represented mathematically by different sets of governing equations along with corresponding boundary conditions. The dimensionless Parameters in the equations are performed for Heat generation (λ), Rayleigh number (Ra) and Prandtl number (Pr). The streamlines, isotherms, average Nusselt number, velocity profiles and temperature distribution of the fluid in the enclosure are presented graphically. The numerical results indicate that the Heat Generation and Rayleigh number have strong influence on the streamlines and isotherms. Also the mentioned parameters have significant effect on average Nusselt number at the hot wall and average temperature of the fluid in the enclosure.},
 year = {2019}
}

Copy | Download

TY - JOUR
T1 - Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation
AU - Md. Shirazul Hoque Mollah
AU - Md. Shahidul Alam
AU - Md. Abdul Alim
Y1 - 2019/10/09
PY - 2019
N1 - https://doi.org/10.11648/j.ijtam.20190503.12
DO - 10.11648/j.ijtam.20190503.12
T2 - International Journal of Theoretical and Applied Mathematics
JF - International Journal of Theoretical and Applied Mathematics
JO - International Journal of Theoretical and Applied Mathematics
SP - 44
EP - 56
PB - Science Publishing Group
SN - 2575-5080
UR - https://doi.org/10.11648/j.ijtam.20190503.12
AB - Free convection flow and heat transfer in a rectangular cavity with heated triangle and internal heat generation is investigated numerically. A finite element analysis is performed to investigate the effects of uniform heating and is also used for solving the Navier-Stokes and Energy balance equations. The horizontal bottom wall is divided into three equal sections. The middle section of the horizontal bottom wall, bottom side of the triangle and left vertical left wall in the enclosure were kept temperature at Th. The other two parts of the horizontal bottom wall and the other two sides of the triangle were kept thermal insulation while the right vertical walls and the top wall of the cavity were maintained constant temperature Tc with Th>Tc. The physical problems are represented mathematically by different sets of governing equations along with corresponding boundary conditions. The dimensionless Parameters in the equations are performed for Heat generation (λ), Rayleigh number (Ra) and Prandtl number (Pr). The streamlines, isotherms, average Nusselt number, velocity profiles and temperature distribution of the fluid in the enclosure are presented graphically. The numerical results indicate that the Heat Generation and Rayleigh number have strong influence on the streamlines and isotherms. Also the mentioned parameters have significant effect on average Nusselt number at the hot wall and average temperature of the fluid in the enclosure.
VL - 5
IS - 3
ER -

Copy | Download

Author Information

Md. Shirazul Hoque Mollah

Department of Mathematics, Dhaka University of Engineering & Technology, Gazipur, Bangladesh
Md. Shahidul Alam

Department of Mathematics, Dhaka University of Engineering & Technology, Gazipur, Bangladesh
Md. Abdul Alim

Department of Mathematics, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Md. Shirazul Hoque Mollah, Md. Shahidul Alam, Md. Abdul Alim. (2019). Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation. International Journal of Theoretical and Applied Mathematics, 5(3), 44-56. https://doi.org/10.11648/j.ijtam.20190503.12

Copy | Download

ACS Style

Md. Shirazul Hoque Mollah; Md. Shahidul Alam; Md. Abdul Alim. Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation. Int. J. Theor. Appl. Math. 2019, 5(3), 44-56. doi: 10.11648/j.ijtam.20190503.12

Copy | Download

AMA Style

Md. Shirazul Hoque Mollah, Md. Shahidul Alam, Md. Abdul Alim. Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation. Int J Theor Appl Math. 2019;5(3):44-56. doi: 10.11648/j.ijtam.20190503.12

Copy | Download

@article{10.11648/j.ijtam.20190503.12,
  author = {Md. Shirazul Hoque Mollah and Md. Shahidul Alam and Md. Abdul Alim},
  title = {Numerical Simulation of Natural Convection in a Rectangular Cavity with Heated Triangle and Internal Heat Generation},
  journal = {International Journal of Theoretical and Applied Mathematics},
  volume = {5},
  number = {3},
  pages = {44-56},
  doi = {10.11648/j.ijtam.20190503.12},
  url = {https://doi.org/10.11648/j.ijtam.20190503.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijtam.20190503.12},
  abstract = {Free convection flow and heat transfer in a rectangular cavity with heated triangle and internal heat generation is investigated numerically. A finite element analysis is performed to investigate the effects of uniform heating and is also used for solving the Navier-Stokes and Energy balance equations. The horizontal bottom wall is divided into three equal sections. The middle section of the horizontal bottom wall, bottom side of the triangle and left vertical left wall in the enclosure were kept temperature at Th. The other two parts of the horizontal bottom wall and the other two sides of the triangle were kept thermal insulation while the right vertical walls and the top wall of the cavity were maintained constant temperature Tc with Th>Tc. The physical problems are represented mathematically by different sets of governing equations along with corresponding boundary conditions. The dimensionless Parameters in the equations are performed for Heat generation (λ), Rayleigh number (Ra) and Prandtl number (Pr). The streamlines, isotherms, average Nusselt number, velocity profiles and temperature distribution of the fluid in the enclosure are presented graphically. The numerical results indicate that the Heat Generation and Rayleigh number have strong influence on the streamlines and isotherms. Also the mentioned parameters have significant effect on average Nusselt number at the hot wall and average temperature of the fluid in the enclosure.},
 year = {2019}
}

Copy | Download