Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA)

Mustapha Abdullahi; Paul Andrew Mamza; Gideon Adamu Shallangwa

doi:doi:10.11648/j.ajpst.20180403.11

| Peer-Reviewed

Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA)

Mustapha Abdullahi, Paul Andrew Mamza, Gideon Adamu Shallangwa

Published in American Journal of Polymer Science and Technology (Volume 4, Issue 3)

Received: 9 January 2019 Accepted: 29 January 2019 Published: 20 February 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

A sugar cane bagasse powder (SCBP) reinforced epoxy resin composite was developed at low cost using the hand lay-up method. The viscoelastic parameters and activation energies of the composites were evaluated using dynamic mechanical analyzer (DMA) in a temperature range from 30°C to 120°C at 10Hz oscillating frequency. It was observed that 30wt% and 40wt% SCBP/Epoxy composites are the stiffest composite materials because of their higher values of storage modulus of 950MPa and 997MPa in comparison to about 800MPa of the neat epoxy matrix. Our findings also revealed that loss modulus decreases with increase in temperature and incorporation of SCPB fiber content caused broadening of the curves which depicts an increase in thermal stability of composite materials in comparison with neat epoxy matrix. There was a gradual decrease in damping coefficients as the SCBP content increases which could be attributed to the reinforcing effect of the fiber. The decrease in activation energies of 293.013, 286.836 and 201.103KJ/mol for 20wt%, 40wt%, and 50wt%SCBP/Epoxy resin composites proved that the activation energy values are in agreement with the storage modulus which suggests an improved stiffness of the composites.

Published in	American Journal of Polymer Science and Technology (Volume 4, Issue 3)
DOI	10.11648/j.ajpst.20180403.11
Page(s)	53-60
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Viscoelastic Nature, Sugarcane Bagasse Powder (SCBP), Epoxy Resin, Dynamic Mechanical Properties

References

[1]	Alamri, H., and I. M. Low. (2013). "Effect of Water Absorption on the Mechanical Properties of Nanoclay Filled Recycled Cellulose Fibre Reinforced Epoxy Hybrid Nanocomposites" Composites Part A: Applied Science and Manufacturing 44: 23-31.
[2]	Thakur VK, Thakur MK, Gupta RK. (2014). Review: Raw Natural Fibers-Based Polymer Composites. International Journal of Polymer Analysis and Characterization. 19 (3): 256-271.4.
[3]	Gibson, F. R. (2011). The principle of composite material mechanics. Florida: CRC Press, US.
[4]	Malkapuram, R., Kumar, V., and Yuvraj, S. N. (2008), “Recent development in natural fiber reinforced polypropylene composites”, Journal of Reinforced Plastics and Composites, Vol. 28, pp. 1169-1189.
[5]	Idicula, M., Malhota, S. K., Joseph, K. and Thomas, S. (2005), “Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fiber reinforced polyester composites”, Composites Science and Technology, Vol. 67, Nos.7- 8, pp. 1077- 1087.
[6]	Jacob, M., Thomas, S., and Varughea, K. T. (2004), “Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites”, Composites Science and Technology, Vol. 64, pp. 955-965.
[7]	Dan-asabe, B. (2016). Thermo-mechanical characterization of banana particulate reinforced PVC composite as piping material. Journal of King Saud University. Engineering Sciences.
[8]	Hatakeyama T, Quinn F. (1999) Thermal analysis: fundamentals and applications to polymer science. 2nd ed. Chichester, UK: John Wiley & Son.
[9]	Li G, Lee-Sullivan P, Thring R. (2000). Determination of activation energy for glass transition of an epoxy adhesive using dynamic mechanical analysis. J Therm Anal Calorim. 60 (2): 377–90.
[10]	Shepard D. D., Twombly B. (1996). Simultaneous dynamic mechanical analysis and dielectric analysis of polymers, Thermochimica Acta 272: 125–129.
[11]	Buehler F. U., Seferis J. C. (1998). Power issues in the manufacturing and characterization of polymers and composite materials, Polymer Composites 19 (5)558–566.
[12]	Hayaty M., Beheshty M. H., Esfandeh M., (2011). A new approach for determination of gel time of a glass/epoxy prepreg, Journal of Applied Polymer Science 120. (3) 1483–1489.
[13]	Oladele, I. O (2014), “Effect of Bagasse Fibre Reinforcement on the Mechanical Properties of Polyester Composites”, The Journal of the Association of Professional Engineers of Trinidad and Tobago, Vol. 42 No. 3, pp. 12-15.
[14]	ASTM D7028-07 (2015). Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA), ASTM International, West Conshohocken, PA.
[15]	Samal, S. K., Mohanty, S., & Nayak, S. K. (2009). Banana/glass fiber-reinforced polypropylene hybrid composites: Fabrication and performance evaluation. Polymer-Plastics Technology and Engineering, 48 (4), 397-414.
[16]	Ferry, J. D., & Ferry, J. D. (1980). Viscoelastic properties of polymers. John Wiley & Sons.
[17]	Gupta, M. K. (2017). Effect of Variation in Frequencies on Dynamic Mechanical Properties of Jute Fibre Reinforced Epoxy Composites. Cellulose, 61, 71.
[18]	Rana, S. S., Gupta, M. K., & Srivastava, R. K. (2017). Effect of variation in frequencies on dynamic mechanical properties of short sisal fibre reinforced epoxy composite. Materials Today: Proceedings, 4 (2), 3387-3396.
[19]	Keusch, S., & Haessler, R. (1999). Influence of surface treatment of glass fibres on the dynamic mechanical properties of epoxy resin composites. Composites Part A: Applied Science and Manufacturing, 30(8), 997-1002. [20] S. Shinoj, R. S. Visvanathan, S. Panigrahi, N. Varadharaju, Biosys. Eng. 109 (2011) 99.
[20]	Gupta, M. K., & Srivastava, R. K. (2016). Mechanical properties of hybrid fibers-reinforced polymer composite: A review. Polymer-Plastics Technology and Engineering, 55 (6), 626-642.
[21]	Shinoj, S., Visvanathan, R., Panigrahi, S., & Varadharaju, N. (2011). Dynamic mechanical properties of oil palm fibre (OPF)-linear low density polyethylene (LLDPE) biocomposites and study of fibre–matrix interactions. Biosystems engineering, 109 (2), 99-107.
[22]	Jawaid, M., Khalil, H. A., Hassan, A., Dungani, R., & Hadiyane, A. (2013). Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites. Composites Part B: Engineering, 45 (1), 619-624.
[23]	Hameed, N., Sreekumar, P. A., Francis, B., Yang, W., & Thomas, S. (2007). Morphology, dynamic mechanical and thermal studies on poly (styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites. Composites Part A: Applied Science and Manufacturing, 38 (12), 2422-2432.
[24]	Nair, K. M., Thomas, S., & Groeninckx, G. (2001). Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres. Composites Science and Technology, 61 (16), 2519-2529.
[25]	Gu, H. (2009). Dynamic mechanical analysis of the seawater treated glass/polyester composites. Materials & Design, 30(7), 2774-2777.
[26]	Martínez-Hernández, A. L., Velasco-Santos, C., De-Icaza, M., & Castano, V. M. (2007). Dynamical–mechanical and thermal analysis of polymeric composites reinforced with keratin biofibers from chicken feathers. Composites Part B: Engineering, 38 (3), 405-410.
[27]	Joseph, P. V., Mathew, G., Joseph, K., Groeninckx, G., & Thomas, S. (2003). Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites. Composites Part A: Applied Science and Manufacturing, 34 (3), 275-290.
[28]	LaPlante, G., & Lee‐Sullivan, P. (2005). Moisture effects on FM300 structural film adhesive: Stress relaxation, fracture toughness, and dynamic mechanical analysis. Journal of Applied Polymer Science, 95 (5), 1285-1294.
[29]	Cowie, J. M. G., & Arrighi, V. (2007). Polymers: chemistry and physics of modern materials. CRC press.
[30]	Pothan, L. A., Oommen, Z., & Thomas, S. (2003). Dynamic mechanical analysis of banana fiber reinforced polyester composites. Composites Science and Technology, 63 (2), 283-293.
[31]	Lavoratti, A., Scienza, L. C., & Zattera, A. J. (2016). Dynamic-mechanical and thermomechanical properties of cellulose nanofiber/polyester resin composites. Carbohydrate Polymers, 136, 955-963.
[32]	Ornaghi, H. L., Bolner, A. S., Fiorio, R., Zattera, A. J., & Amico, S. C. (2010). Mechanical and dynamic mechanical analysis of hybrid composites molded by resin transfer molding. Journal of Applied Polymer Science, 118, 887–896. http: //dx.doi. org/10.1002/app. 32388

Cite This Article

Plain Text BibTeX RIS

APA Style

Mustapha Abdullahi, Paul Andrew Mamza, Gideon Adamu Shallangwa. (2019). Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA). American Journal of Polymer Science and Technology, 4(3), 53-60. https://doi.org/10.11648/j.ajpst.20180403.11

Copy | Download

ACS Style

Mustapha Abdullahi; Paul Andrew Mamza; Gideon Adamu Shallangwa. Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA). Am. J. Polym. Sci. Technol. 2019, 4(3), 53-60. doi: 10.11648/j.ajpst.20180403.11

Copy | Download

AMA Style

Mustapha Abdullahi, Paul Andrew Mamza, Gideon Adamu Shallangwa. Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA). Am J Polym Sci Technol. 2019;4(3):53-60. doi: 10.11648/j.ajpst.20180403.11

Copy | Download

@article{10.11648/j.ajpst.20180403.11,
  author = {Mustapha Abdullahi and Paul Andrew Mamza and Gideon Adamu Shallangwa},
  title = {Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA)},
  journal = {American Journal of Polymer Science and Technology},
  volume = {4},
  number = {3},
  pages = {53-60},
  doi = {10.11648/j.ajpst.20180403.11},
  url = {https://doi.org/10.11648/j.ajpst.20180403.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20180403.11},
  abstract = {A sugar cane bagasse powder (SCBP) reinforced epoxy resin composite was developed at low cost using the hand lay-up method. The viscoelastic parameters and activation energies of the composites were evaluated using dynamic mechanical analyzer (DMA) in a temperature range from 30°C to 120°C at 10Hz oscillating frequency. It was observed that 30wt% and 40wt% SCBP/Epoxy composites are the stiffest composite materials because of their higher values of storage modulus of 950MPa and 997MPa in comparison to about 800MPa of the neat epoxy matrix. Our findings also revealed that loss modulus decreases with increase in temperature and incorporation of SCPB fiber content caused broadening of the curves which depicts an increase in thermal stability of composite materials in comparison with neat epoxy matrix. There was a gradual decrease in damping coefficients as the SCBP content increases which could be attributed to the reinforcing effect of the fiber. The decrease in activation energies of 293.013, 286.836 and 201.103KJ/mol for 20wt%, 40wt%, and 50wt%SCBP/Epoxy resin composites proved that the activation energy values are in agreement with the storage modulus which suggests an improved stiffness of the composites.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA)
AU  - Mustapha Abdullahi
AU  - Paul Andrew Mamza
AU  - Gideon Adamu Shallangwa
Y1  - 2019/02/20
PY  - 2019
N1  - https://doi.org/10.11648/j.ajpst.20180403.11
DO  - 10.11648/j.ajpst.20180403.11
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 53
EP  - 60
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20180403.11
AB  - A sugar cane bagasse powder (SCBP) reinforced epoxy resin composite was developed at low cost using the hand lay-up method. The viscoelastic parameters and activation energies of the composites were evaluated using dynamic mechanical analyzer (DMA) in a temperature range from 30°C to 120°C at 10Hz oscillating frequency. It was observed that 30wt% and 40wt% SCBP/Epoxy composites are the stiffest composite materials because of their higher values of storage modulus of 950MPa and 997MPa in comparison to about 800MPa of the neat epoxy matrix. Our findings also revealed that loss modulus decreases with increase in temperature and incorporation of SCPB fiber content caused broadening of the curves which depicts an increase in thermal stability of composite materials in comparison with neat epoxy matrix. There was a gradual decrease in damping coefficients as the SCBP content increases which could be attributed to the reinforcing effect of the fiber. The decrease in activation energies of 293.013, 286.836 and 201.103KJ/mol for 20wt%, 40wt%, and 50wt%SCBP/Epoxy resin composites proved that the activation energy values are in agreement with the storage modulus which suggests an improved stiffness of the composites.
VL  - 4
IS  - 3
ER  -

Copy | Download

Author Information

Mustapha Abdullahi

Department of Chemistry, Ahmadu Bello University, Samaru, Zaria, Kaduna State, Nigeria
Paul Andrew Mamza

Department of Chemistry, Ahmadu Bello University, Samaru, Zaria, Kaduna State, Nigeria
Gideon Adamu Shallangwa

Department of Chemistry, Ahmadu Bello University, Samaru, Zaria, Kaduna State, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mustapha Abdullahi, Paul Andrew Mamza, Gideon Adamu Shallangwa. (2019). Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA). American Journal of Polymer Science and Technology, 4(3), 53-60. https://doi.org/10.11648/j.ajpst.20180403.11

Copy | Download

ACS Style

Mustapha Abdullahi; Paul Andrew Mamza; Gideon Adamu Shallangwa. Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA). Am. J. Polym. Sci. Technol. 2019, 4(3), 53-60. doi: 10.11648/j.ajpst.20180403.11

Copy | Download

AMA Style

Mustapha Abdullahi, Paul Andrew Mamza, Gideon Adamu Shallangwa. Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA). Am J Polym Sci Technol. 2019;4(3):53-60. doi: 10.11648/j.ajpst.20180403.11

Copy | Download

@article{10.11648/j.ajpst.20180403.11,
  author = {Mustapha Abdullahi and Paul Andrew Mamza and Gideon Adamu Shallangwa},
  title = {Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA)},
  journal = {American Journal of Polymer Science and Technology},
  volume = {4},
  number = {3},
  pages = {53-60},
  doi = {10.11648/j.ajpst.20180403.11},
  url = {https://doi.org/10.11648/j.ajpst.20180403.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20180403.11},
  abstract = {A sugar cane bagasse powder (SCBP) reinforced epoxy resin composite was developed at low cost using the hand lay-up method. The viscoelastic parameters and activation energies of the composites were evaluated using dynamic mechanical analyzer (DMA) in a temperature range from 30°C to 120°C at 10Hz oscillating frequency. It was observed that 30wt% and 40wt% SCBP/Epoxy composites are the stiffest composite materials because of their higher values of storage modulus of 950MPa and 997MPa in comparison to about 800MPa of the neat epoxy matrix. Our findings also revealed that loss modulus decreases with increase in temperature and incorporation of SCPB fiber content caused broadening of the curves which depicts an increase in thermal stability of composite materials in comparison with neat epoxy matrix. There was a gradual decrease in damping coefficients as the SCBP content increases which could be attributed to the reinforcing effect of the fiber. The decrease in activation energies of 293.013, 286.836 and 201.103KJ/mol for 20wt%, 40wt%, and 50wt%SCBP/Epoxy resin composites proved that the activation energy values are in agreement with the storage modulus which suggests an improved stiffness of the composites.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Effect of Visco-Elastic Parameters and Activation Energy of Epoxy Resin Matrix Reinforced with Sugarcane Bagasse Powder (SCBP) Using Dynamic Mechanical Analyzer (DMA)
AU  - Mustapha Abdullahi
AU  - Paul Andrew Mamza
AU  - Gideon Adamu Shallangwa
Y1  - 2019/02/20
PY  - 2019
N1  - https://doi.org/10.11648/j.ajpst.20180403.11
DO  - 10.11648/j.ajpst.20180403.11
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 53
EP  - 60
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20180403.11
AB  - A sugar cane bagasse powder (SCBP) reinforced epoxy resin composite was developed at low cost using the hand lay-up method. The viscoelastic parameters and activation energies of the composites were evaluated using dynamic mechanical analyzer (DMA) in a temperature range from 30°C to 120°C at 10Hz oscillating frequency. It was observed that 30wt% and 40wt% SCBP/Epoxy composites are the stiffest composite materials because of their higher values of storage modulus of 950MPa and 997MPa in comparison to about 800MPa of the neat epoxy matrix. Our findings also revealed that loss modulus decreases with increase in temperature and incorporation of SCPB fiber content caused broadening of the curves which depicts an increase in thermal stability of composite materials in comparison with neat epoxy matrix. There was a gradual decrease in damping coefficients as the SCBP content increases which could be attributed to the reinforcing effect of the fiber. The decrease in activation energies of 293.013, 286.836 and 201.103KJ/mol for 20wt%, 40wt%, and 50wt%SCBP/Epoxy resin composites proved that the activation energy values are in agreement with the storage modulus which suggests an improved stiffness of the composites.
VL  - 4
IS  - 3
ER  -

Copy | Download