In this research, investigating the possibility of producing, processing and also characterization of polypropylene fiber and recycling polypropylene has been presented. For this purpose, PP powder and inorganic filler were mixed using a twin screw extruder and modified granule was produced. After producing as-spun filament yarns by spinning machine at the take-up speed of 2000 m/min, samples were drawn, textured and finally weft knitted. Physical and structural properties of as-spun and drawn yarns with constant and variable draw ratios were investigated. The experimental results revealed that the straight run PP yarn impact tolerance is higher than the recycled PP yarn. And both type of yarns could be compared by drawing process. The straight run and recycled polypropylene filament woven laminates performed better in terms of both tensile load and broken elongation, with slight decrease in broken elongation results.
| Published in | American Journal of Polymer Science and Technology (Volume 3, Issue 4) |
| DOI | 10.11648/j.ajpst.20170304.13 |
| Page(s) | 70-75 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Polypropylene, Fiber, Extruder Machine
| [1] | Kostar, T. D. and Chou, T.-W., A methodology for Cartesian braiding of three-dimensional shapes and special structures. Journal of Materials Science, 2002. 37 (13): p. 2811-2824. |
| [2] | Tolosana, N., Lomov, S., Stuve, J., and Miravete, A., Development of a Simulation Tool for 3D Braiding Architectures. AIP Conference Proceedings, 2007. 907 (1): p. 1005-1010. |
| [3] | Shi, Y., Swait, T., and Soutis, C., Modelling damage evolution in composite laminates subjected to low velocity impact. Compos. Struct., 2012. 94 (9): p. 2902-2913. |
| [4] | Christoforou, A., Yigit, A., Cantwell, W., and Yang, F., Impact Response Characterization in Composite Plates—Experimental Validation. Applied Composite Materials, 2010. 17 (5): p. 463-472. |
| [5] | Hull, D. and Shi, Y. B., Damage Mechanism Characterization in Composite Damage Tolerance Investigations. Composite Structures, 1993. 23 (2): p. 99-120. |
| [6] | Miravete, A., 3-D textile reinforcements in composite materials. 1999: CRC Press. |
| [7] | Generation III Extended Cold Weather Clothing System (ECWCS). PM Soldier Equipment. October 2016. |
| [8] | Benedikt, G. M. and Goodall, B. L. (eds.) (1998) Metallocene Catalyzed Polymers, ChemTech Publishing: Toronto. ISBN 978-1-884207-59-4. |
| [9] | Sierakowski, R. and Newaz, G., Damage Tolerance in Advanced Composites. 1995: Technomic Pub. Co. |
| [10] | Biaxially Oriented Polypropylene Films. Granwell. Retrieved: 2012-05-31. |
APA Style
Abdalaziz M. Seddeg, Mohammed Margany, Omsalama A. Alhafian, Hussain A. Hussain, Mohammed Noraldeen, et al. (2017). Physicochemical Comparison Between Recycled and Straight Run Polypropylene Yarn. American Journal of Polymer Science and Technology, 3(4), 70-75. https://doi.org/10.11648/j.ajpst.20170304.13
ACS Style
Abdalaziz M. Seddeg; Mohammed Margany; Omsalama A. Alhafian; Hussain A. Hussain; Mohammed Noraldeen, et al. Physicochemical Comparison Between Recycled and Straight Run Polypropylene Yarn. Am. J. Polym. Sci. Technol. 2017, 3(4), 70-75. doi: 10.11648/j.ajpst.20170304.13
AMA Style
Abdalaziz M. Seddeg, Mohammed Margany, Omsalama A. Alhafian, Hussain A. Hussain, Mohammed Noraldeen, et al. Physicochemical Comparison Between Recycled and Straight Run Polypropylene Yarn. Am J Polym Sci Technol. 2017;3(4):70-75. doi: 10.11648/j.ajpst.20170304.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajpst.20170304.13,
author = {Abdalaziz M. Seddeg and Mohammed Margany and Omsalama A. Alhafian and Hussain A. Hussain and Mohammed Noraldeen and Mohamed N. Abdalaziz},
title = {Physicochemical Comparison Between Recycled and Straight Run Polypropylene Yarn},
journal = {American Journal of Polymer Science and Technology},
volume = {3},
number = {4},
pages = {70-75},
doi = {10.11648/j.ajpst.20170304.13},
url = {https://doi.org/10.11648/j.ajpst.20170304.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20170304.13},
abstract = {In this research, investigating the possibility of producing, processing and also characterization of polypropylene fiber and recycling polypropylene has been presented. For this purpose, PP powder and inorganic filler were mixed using a twin screw extruder and modified granule was produced. After producing as-spun filament yarns by spinning machine at the take-up speed of 2000 m/min, samples were drawn, textured and finally weft knitted. Physical and structural properties of as-spun and drawn yarns with constant and variable draw ratios were investigated. The experimental results revealed that the straight run PP yarn impact tolerance is higher than the recycled PP yarn. And both type of yarns could be compared by drawing process. The straight run and recycled polypropylene filament woven laminates performed better in terms of both tensile load and broken elongation, with slight decrease in broken elongation results.},
year = {2017}
}
TY - JOUR T1 - Physicochemical Comparison Between Recycled and Straight Run Polypropylene Yarn AU - Abdalaziz M. Seddeg AU - Mohammed Margany AU - Omsalama A. Alhafian AU - Hussain A. Hussain AU - Mohammed Noraldeen AU - Mohamed N. Abdalaziz Y1 - 2017/07/25 PY - 2017 N1 - https://doi.org/10.11648/j.ajpst.20170304.13 DO - 10.11648/j.ajpst.20170304.13 T2 - American Journal of Polymer Science and Technology JF - American Journal of Polymer Science and Technology JO - American Journal of Polymer Science and Technology SP - 70 EP - 75 PB - Science Publishing Group SN - 2575-5986 UR - https://doi.org/10.11648/j.ajpst.20170304.13 AB - In this research, investigating the possibility of producing, processing and also characterization of polypropylene fiber and recycling polypropylene has been presented. For this purpose, PP powder and inorganic filler were mixed using a twin screw extruder and modified granule was produced. After producing as-spun filament yarns by spinning machine at the take-up speed of 2000 m/min, samples were drawn, textured and finally weft knitted. Physical and structural properties of as-spun and drawn yarns with constant and variable draw ratios were investigated. The experimental results revealed that the straight run PP yarn impact tolerance is higher than the recycled PP yarn. And both type of yarns could be compared by drawing process. The straight run and recycled polypropylene filament woven laminates performed better in terms of both tensile load and broken elongation, with slight decrease in broken elongation results. VL - 3 IS - 4 ER -
Information
Email: