Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials

Vasily Mishakin; Stanislav Verichev; Evgeny Razov

doi:doi:10.11648/j.ep.20170101.13

| Peer-Reviewed

Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials

Vasily Mishakin, Stanislav Verichev, Evgeny Razov

Published in Engineering Physics (Volume 1, Issue 1)

Received: 30 November 2016 Accepted: 22 December 2016 Published: 7 January 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The study of the influence of high hydrostatic pressure on abrasive wear of hard alloy materials has been done using a custom-made setup allowing testing of abrasive wear of materials under hydrostatic pressures of up to 250 atm. It has been confirmed that high hydrostatic pressure has a significant effect on the wear rate of studied materials. By increasing the hydrostatic pressure from atmospheric conditions to 200 atm, for materials with a high content of chromium the wear rate has been increased 7 times, while for materials based on tungsten carbide the wear rate has been is increased twice. It has been established that the main damage to surfaces of materials is due to delamination and spalling of hard particles.

Published in	Engineering Physics (Volume 1, Issue 1)
DOI	10.11648/j.ep.20170101.13
Page(s)	14-20
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Abrasive Wear, Hydrostatic Pressure, Hard Alloys, Deep Sea Mining

References

[1]	R. L. J. Helmons, S. A. Miedema, C. van Rhee, 2016. Modelling the effect of water depth on rock cutting processes with the use of discrete element method. Terra et Aqua, Number 142, P. 17-24.
[2]	Mario Alvarez Grima, Sape A. Miedema, Robert G. van de Ketterij, Cees van Rhee, 2015. Effect of hyperbaric pressure on rock cutting process Engineering Geology 196: 24-36.
[3]	Jort van Wijk, Sape Miedema, Cees van Rhee 2012. Meeting the Challenges Of Deep-Sea Mining Dutch Researchers Study Advances in Hyperbaric Cutting And Vertical Hydraulic Transport for Full-Scale Operations. Sea Technology 53 (3): 40-42.
[4]	Huang, H., B. Lecampion, and E. Detournay, 2013. Discrete element modeling of tool-rock interaction I: rock cutting. International Journal for Numerical and Analytical Methods in Geomechanics 37 (13), 1913–1929.
[5]	Su, O. and N. A. Akcin, 2011. Numerical simulation of rock cutting using the discrete element method. International Journal of Rock Mechanics and Mining Sciences 48 (3), 434–442.
[6]	Giovanni Spagnoli, Sape A. Miedema, Christian Herrmann, Julien Denegre, 2016. Preliminary Design of a Trench Cutter System for Deep-Sea Mining Applications Under Hyperbaric Conditions. IEEE Journal of Oceanic Engineering 41 (4): 930–943.
[7]	Guo-Sheng Sua, Yan-Kuo Guoa, Xue-Li Songa, Heng Taoa, 2016. Effects of high-pressure cutting fluid with different jetting paths on tool wear in cutting compacted graphite iron. Tribology International, Volume 103, November 2016, P. 289–297.
[8]	Verichev S. N., Mishakin V. V, Nuzhdin N. A., Razov E. N., 2015. Experimental study of abrasive wear of structural materials under the high hydrostatic pressure. Ocean Engineering. 2015. Vol. 99. P. 9–13.
[9]	Jian Kang, Jianchun Fan, Jiancun Gao, 2016. Research on erosion wear of high-pressure pipes during hydraulic fracturing slurry flow. Journal of Loss Prevention in the Process Industries. Volume 43, P. 438–448.
[10]	Yoganandh J., Natarajan S., Kumaresh Babu S. P., 2015. Erosive wear behavior of high-alloy cast iron and duplex stainless steel under mining conditions. Journal of Materials and Perfomance. 2015. Vol. 24 (9). P. 3588–3598.
[11]	Bridgman, P. W., 1952. Studies in Large Plastic Flow and Fracture with Special Emphasis on the Effects of Hydrostatic Pressure. McGraw.
[12]	Kragelsky, I. V., Dobychin, M. N., Kombalov, V. S., 1982. Friction and Wear: Calculation Methods. Elsevier Science & Technology.
[13]	Deryagin, B. V., Krotova, N. A., Smilga, V. P., 1973. Adhesion of Solids. Science, Moscow, in Russian.
[14]	Bartenev, G. M., Lavrentyev, V. V., 1972. Friction and Wear of Polymers. Chemistry, Leningrad, in Russian.
[15]	Strelnikov, Yu. A., 2010. Friction during the contact interaction of surfaces under the hydrostatic pressure Ph. D. thesis.
[16]	Sosnovskiy, L., 2005. TRIBO-FATIGUE: Wear-Fatigue Damage and its Prediction. Springer.
[17]	Ibatullin, I. D., 2008. Kinetics of Fatigue Damage and Destruction of Surface Layers: Monograph. Samara: Samara state technical Univ., 387 p. p., in Russian.
[18]	Lemaitre, J., 1985. A continuous damage mechanics model for ductile fracture. J. Eng. Mater. Technol. 107 (1), 83–89.
[19]	Collins, J. A., 1993. Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention. John Wiley and sons.

Cite This Article

Plain Text BibTeX RIS

APA Style

Vasily Mishakin, Stanislav Verichev, Evgeny Razov. (2017). Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials. Engineering Physics, 1(1), 14-20. https://doi.org/10.11648/j.ep.20170101.13

Copy | Download

ACS Style

Vasily Mishakin; Stanislav Verichev; Evgeny Razov. Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials. Eng. Phys. 2017, 1(1), 14-20. doi: 10.11648/j.ep.20170101.13

Copy | Download

AMA Style

Vasily Mishakin, Stanislav Verichev, Evgeny Razov. Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials. Eng Phys. 2017;1(1):14-20. doi: 10.11648/j.ep.20170101.13

Copy | Download

@article{10.11648/j.ep.20170101.13,
  author = {Vasily Mishakin and Stanislav Verichev and Evgeny Razov},
  title = {Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials},
  journal = {Engineering Physics},
  volume = {1},
  number = {1},
  pages = {14-20},
  doi = {10.11648/j.ep.20170101.13},
  url = {https://doi.org/10.11648/j.ep.20170101.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ep.20170101.13},
  abstract = {The study of the influence of high hydrostatic pressure on abrasive wear of hard alloy materials has been done using a custom-made setup allowing testing of abrasive wear of materials under hydrostatic pressures of up to 250 atm. It has been confirmed that high hydrostatic pressure has a significant effect on the wear rate of studied materials. By increasing the hydrostatic pressure from atmospheric conditions to 200 atm, for materials with a high content of chromium the wear rate has been increased 7 times, while for materials based on tungsten carbide the wear rate has been is increased twice. It has been established that the main damage to surfaces of materials is due to delamination and spalling of hard particles.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials
AU  - Vasily Mishakin
AU  - Stanislav Verichev
AU  - Evgeny Razov
Y1  - 2017/01/07
PY  - 2017
N1  - https://doi.org/10.11648/j.ep.20170101.13
DO  - 10.11648/j.ep.20170101.13
T2  - Engineering Physics
JF  - Engineering Physics
JO  - Engineering Physics
SP  - 14
EP  - 20
PB  - Science Publishing Group
SN  - 2640-1029
UR  - https://doi.org/10.11648/j.ep.20170101.13
AB  - The study of the influence of high hydrostatic pressure on abrasive wear of hard alloy materials has been done using a custom-made setup allowing testing of abrasive wear of materials under hydrostatic pressures of up to 250 atm. It has been confirmed that high hydrostatic pressure has a significant effect on the wear rate of studied materials. By increasing the hydrostatic pressure from atmospheric conditions to 200 atm, for materials with a high content of chromium the wear rate has been increased 7 times, while for materials based on tungsten carbide the wear rate has been is increased twice. It has been established that the main damage to surfaces of materials is due to delamination and spalling of hard particles.
VL  - 1
IS  - 1
ER  -

Copy | Download

Author Information

Vasily Mishakin

Institute of Problems in Machine Engineering of the Russian Academy of Sciences, Nizhny Novgorod, Russia
Stanislav Verichev

Institute of Problems in Machine Engineering of the Russian Academy of Sciences, Nizhny Novgorod, Russia
Evgeny Razov

Institute of Problems in Machine Engineering of the Russian Academy of Sciences, Nizhny Novgorod, Russia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Vasily Mishakin, Stanislav Verichev, Evgeny Razov. (2017). Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials. Engineering Physics, 1(1), 14-20. https://doi.org/10.11648/j.ep.20170101.13

Copy | Download

ACS Style

Vasily Mishakin; Stanislav Verichev; Evgeny Razov. Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials. Eng. Phys. 2017, 1(1), 14-20. doi: 10.11648/j.ep.20170101.13

Copy | Download

AMA Style

Vasily Mishakin, Stanislav Verichev, Evgeny Razov. Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials. Eng Phys. 2017;1(1):14-20. doi: 10.11648/j.ep.20170101.13

Copy | Download

@article{10.11648/j.ep.20170101.13,
  author = {Vasily Mishakin and Stanislav Verichev and Evgeny Razov},
  title = {Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials},
  journal = {Engineering Physics},
  volume = {1},
  number = {1},
  pages = {14-20},
  doi = {10.11648/j.ep.20170101.13},
  url = {https://doi.org/10.11648/j.ep.20170101.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ep.20170101.13},
  abstract = {The study of the influence of high hydrostatic pressure on abrasive wear of hard alloy materials has been done using a custom-made setup allowing testing of abrasive wear of materials under hydrostatic pressures of up to 250 atm. It has been confirmed that high hydrostatic pressure has a significant effect on the wear rate of studied materials. By increasing the hydrostatic pressure from atmospheric conditions to 200 atm, for materials with a high content of chromium the wear rate has been increased 7 times, while for materials based on tungsten carbide the wear rate has been is increased twice. It has been established that the main damage to surfaces of materials is due to delamination and spalling of hard particles.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Effect of High Hydrostatic Pressure on the Abrasive Wear of Hard Alloy Materials
AU  - Vasily Mishakin
AU  - Stanislav Verichev
AU  - Evgeny Razov
Y1  - 2017/01/07
PY  - 2017
N1  - https://doi.org/10.11648/j.ep.20170101.13
DO  - 10.11648/j.ep.20170101.13
T2  - Engineering Physics
JF  - Engineering Physics
JO  - Engineering Physics
SP  - 14
EP  - 20
PB  - Science Publishing Group
SN  - 2640-1029
UR  - https://doi.org/10.11648/j.ep.20170101.13
AB  - The study of the influence of high hydrostatic pressure on abrasive wear of hard alloy materials has been done using a custom-made setup allowing testing of abrasive wear of materials under hydrostatic pressures of up to 250 atm. It has been confirmed that high hydrostatic pressure has a significant effect on the wear rate of studied materials. By increasing the hydrostatic pressure from atmospheric conditions to 200 atm, for materials with a high content of chromium the wear rate has been increased 7 times, while for materials based on tungsten carbide the wear rate has been is increased twice. It has been established that the main damage to surfaces of materials is due to delamination and spalling of hard particles.
VL  - 1
IS  - 1
ER  -

Copy | Download