Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution

Onuh Ojogba Spencer; Olatunbosun Tafa Yusuf; Temidayo Christopher Tofade

doi:doi:10.11648/j.ajmie.20180305.12

| Peer-Reviewed

Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution

Onuh Ojogba Spencer, Olatunbosun Tafa Yusuf, Temidayo Christopher Tofade

Published in American Journal of Mechanical and Industrial Engineering (Volume 3, Issue 5)

Received: 1 October 2018 Accepted: 25 October 2018 Published: 5 December 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

With the recent advancement in complexity of various technological products and the need for faster production, the quest for inventing new manufacturing technologies to reduce the design limitations such as the costs involved in purchasing and maintaining machines, the need for a trained operator, and increase in waste produced during machining in conventional manufacturing methods, has received significant boost in recent time with the advent of additive technology (AM) or 3D printing within various experts in industry, research & development institutes and universities, which invariably has not only enhanced deliverable on time and on budget of products, as well as ability to fabricate complex geometry with high precision and weight reduction. Several types of additive manufacturing (AM) that use different technologies and materials have emerged, in which the 3D systems are used to produce objects through adding rather than subtracting materials, transforming essentially detailed design files to fully functional products, to directly or indirectly alleviate the burden associated with convectional manufacturing and assembly methods. In this paper, an extensive review has been done on several methods adopted in 3D printing. Example include: Fused Filament Fabrication (FFF), Selective Laser Sintering (SLS), Continuous Filament Fabrication (CFF), Stereolithography (SLA), Atomic Diffusion Additive Manufacturing (ADAM) and Selective Laser Melting (SLM). The various steps involve in operation and working principle of 3D printing technology was also stated. The paper also presents the applicable areas of 3-D printing focusing on tooling, aviation/aerospace, medical/biomechanical and city planning.

Published in	American Journal of Mechanical and Industrial Engineering (Volume 3, Issue 5)
DOI	10.11648/j.ajmie.20180305.12
Page(s)	80-90
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Additive Manufacturing, Fused Filament Fabrication, Selective Laser Sintering, Continuous Filament Fabrication, Stereolithography, Atomic Diffusion and Selective Laser Melting

References

[1]	ASTM Standard. Standard terminology for additive manufacturing technologies, vol. 10.04.
[2]	Kief H. B. and Roschiwal, “The Free Beginner’s Guide to 3D printing 3D printing industry.com”, 2011.
[3]	The Birth of 3D Printing – 3D Systems Corporation Building Parts, Layer By Layer – Objet Ltd.
[4]	www.esa.int. Accessed and retrieved July 2018.
[5]	Wohlers Report 2015: 3D Printing and Additive Manufacturing State of the Industry Annual Worldwide Progress Report”, Wohlers Associates, 2015.
[6]	Simulating reality, MSC Software Magazine Volume VII-Summer 2017 Issue.
[7]	3D Printing: The Next Revolution in Industrial Manufacturing, New research from UPS and the Consumer Technology Association (CTA).
[8]	Sculpteo : “The state of 3d printing in their third edition,” 2017.
[9]	Wohlers TT, “Additive manufacturing and 3D printing state of the industry: annual worldwide progress report.” Fort Collins, Wohlers Associates, 2012.
[10]	Pham DT, Dimov SS, “Rapid manufacturing,” Springer Verlag, p 6, 2001.
[11]	https://www.sd3d.com/fff-vs-sla-vs-sls/. Accessed: July 2018.
[12]	https://www.swerea.se/sites/default/files/fff.pdf. Accessed and retrieved July 2018.
[13]	http://prototype.asia/3dprinting/Polyjet/ Accessed: June 2018.
[14]	http://blogs.solidworks.com/tech/2015/05/preparing-solidworks-models-3d-printing.html. Accessed: August 2018.
[15]	https://grabcad.com/tutorials/3d-printing-with-autocad-and-makerbot. Accessed: 2018.
[16]	https://imagetransforms.com/makerbot-replicator/. Accessed: August 2018.
[17]	https://all3dp.com/4/3d-hubs-releases-digital-manufacturing-trend-report-q4-2018/. Accessed: October 2018.
[18]	https://3dprint.com/66742/ultimaker-2-aluminum-extrusion/. Accessed: September 2018.
[19]	https://simple.wikipedia.org/wiki/Stepper_motor#/media/File:Nema_17_Stepper_Motor.jp. Accessed: August 2018.
[20]	https://sourceforge.net/projects/easycnc/ Accessed: September 2018.
[21]	https://3duniverse.org/2018/08/03/ultimaker-s5-introduction/ Accessed: September 2018.
[22]	https://shop3duniverse.com/products/ultimaker-s5-education-bundle Accessed: September 2018.
[23]	Wohlers TT, “Wohlers report 2012: additive manufacturing and 3D printing state of the industry: annual worldwide progress report.” Fort Collins, Wohlers Associates, 2012.
[24]	https://www.ebay.com/itm/OEM-Kia-Sorento-Headlamp-Turn-Signal-and-Wiper-Steering-Column-Switch-/142376755598 Accessed and retrieved July 2018.
[25]	Stratasys: Winn Hardin, “Additive Manufacturing Boosts Aerospace Applications,” 2016.
[26]	http://www.makepartsfast.com/ Accessed: July 2018.
[27]	www.cgarchitect.com. Accessed: July 2018.

Cite This Article

Plain Text BibTeX RIS

APA Style

Onuh Ojogba Spencer, Olatunbosun Tafa Yusuf, Temidayo Christopher Tofade. (2018). Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution. American Journal of Mechanical and Industrial Engineering, 3(5), 80-90. https://doi.org/10.11648/j.ajmie.20180305.12

Copy | Download

ACS Style

Onuh Ojogba Spencer; Olatunbosun Tafa Yusuf; Temidayo Christopher Tofade. Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution. Am. J. Mech. Ind. Eng. 2018, 3(5), 80-90. doi: 10.11648/j.ajmie.20180305.12

Copy | Download

AMA Style

Onuh Ojogba Spencer, Olatunbosun Tafa Yusuf, Temidayo Christopher Tofade. Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution. Am J Mech Ind Eng. 2018;3(5):80-90. doi: 10.11648/j.ajmie.20180305.12

Copy | Download

@article{10.11648/j.ajmie.20180305.12,
  author = {Onuh Ojogba Spencer and Olatunbosun Tafa Yusuf and Temidayo Christopher Tofade},
  title = {Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {3},
  number = {5},
  pages = {80-90},
  doi = {10.11648/j.ajmie.20180305.12},
  url = {https://doi.org/10.11648/j.ajmie.20180305.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20180305.12},
  abstract = {With the recent advancement in complexity of various technological products and the need for faster production, the quest for inventing new manufacturing technologies to reduce the design limitations such as the costs involved in purchasing and maintaining machines, the need for a trained operator, and increase in waste produced during machining in conventional manufacturing methods, has received significant boost in recent time with the advent of additive technology (AM) or 3D printing within various experts in industry, research & development institutes and universities, which invariably has not only enhanced deliverable on time and on budget of products, as well as ability to fabricate complex geometry with high precision and weight reduction. Several types of additive manufacturing (AM) that use different technologies and materials have emerged, in which the 3D systems are used to produce objects through adding rather than subtracting materials, transforming essentially detailed design files to fully functional products, to directly or indirectly alleviate the burden associated with convectional manufacturing and assembly methods. In this paper, an extensive review has been done on several methods adopted in 3D printing. Example include: Fused Filament Fabrication (FFF), Selective Laser Sintering (SLS), Continuous Filament Fabrication (CFF), Stereolithography (SLA), Atomic Diffusion Additive Manufacturing (ADAM) and Selective Laser Melting (SLM). The various steps involve in operation and working principle of 3D printing technology was also stated. The paper also presents the applicable areas of 3-D printing focusing on tooling, aviation/aerospace, medical/biomechanical and city planning.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution
AU  - Onuh Ojogba Spencer
AU  - Olatunbosun Tafa Yusuf
AU  - Temidayo Christopher Tofade
Y1  - 2018/12/05
PY  - 2018
N1  - https://doi.org/10.11648/j.ajmie.20180305.12
DO  - 10.11648/j.ajmie.20180305.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 80
EP  - 90
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20180305.12
AB  - With the recent advancement in complexity of various technological products and the need for faster production, the quest for inventing new manufacturing technologies to reduce the design limitations such as the costs involved in purchasing and maintaining machines, the need for a trained operator, and increase in waste produced during machining in conventional manufacturing methods, has received significant boost in recent time with the advent of additive technology (AM) or 3D printing within various experts in industry, research & development institutes and universities, which invariably has not only enhanced deliverable on time and on budget of products, as well as ability to fabricate complex geometry with high precision and weight reduction. Several types of additive manufacturing (AM) that use different technologies and materials have emerged, in which the 3D systems are used to produce objects through adding rather than subtracting materials, transforming essentially detailed design files to fully functional products, to directly or indirectly alleviate the burden associated with convectional manufacturing and assembly methods. In this paper, an extensive review has been done on several methods adopted in 3D printing. Example include: Fused Filament Fabrication (FFF), Selective Laser Sintering (SLS), Continuous Filament Fabrication (CFF), Stereolithography (SLA), Atomic Diffusion Additive Manufacturing (ADAM) and Selective Laser Melting (SLM). The various steps involve in operation and working principle of 3D printing technology was also stated. The paper also presents the applicable areas of 3-D printing focusing on tooling, aviation/aerospace, medical/biomechanical and city planning.
VL  - 3
IS  - 5
ER  -

Copy | Download

Author Information

Onuh Ojogba Spencer

Department of Mechanical Engineering, Centre for Satellite Technology Development, Abuja, Nigeria; National Space Research and Development Agency (NASRDA), Abuja, Nigeria
Olatunbosun Tafa Yusuf

Department of Mechanical Engineering, Centre for Satellite Technology Development, Abuja, Nigeria; National Space Research and Development Agency (NASRDA), Abuja, Nigeria
Temidayo Christopher Tofade

Department of Mechanical Engineering, Centre for Satellite Technology Development, Abuja, Nigeria; National Space Research and Development Agency (NASRDA), Abuja, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Onuh Ojogba Spencer, Olatunbosun Tafa Yusuf, Temidayo Christopher Tofade. (2018). Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution. American Journal of Mechanical and Industrial Engineering, 3(5), 80-90. https://doi.org/10.11648/j.ajmie.20180305.12

Copy | Download

ACS Style

Onuh Ojogba Spencer; Olatunbosun Tafa Yusuf; Temidayo Christopher Tofade. Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution. Am. J. Mech. Ind. Eng. 2018, 3(5), 80-90. doi: 10.11648/j.ajmie.20180305.12

Copy | Download

AMA Style

Onuh Ojogba Spencer, Olatunbosun Tafa Yusuf, Temidayo Christopher Tofade. Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution. Am J Mech Ind Eng. 2018;3(5):80-90. doi: 10.11648/j.ajmie.20180305.12

Copy | Download

@article{10.11648/j.ajmie.20180305.12,
  author = {Onuh Ojogba Spencer and Olatunbosun Tafa Yusuf and Temidayo Christopher Tofade},
  title = {Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {3},
  number = {5},
  pages = {80-90},
  doi = {10.11648/j.ajmie.20180305.12},
  url = {https://doi.org/10.11648/j.ajmie.20180305.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20180305.12},
  abstract = {With the recent advancement in complexity of various technological products and the need for faster production, the quest for inventing new manufacturing technologies to reduce the design limitations such as the costs involved in purchasing and maintaining machines, the need for a trained operator, and increase in waste produced during machining in conventional manufacturing methods, has received significant boost in recent time with the advent of additive technology (AM) or 3D printing within various experts in industry, research & development institutes and universities, which invariably has not only enhanced deliverable on time and on budget of products, as well as ability to fabricate complex geometry with high precision and weight reduction. Several types of additive manufacturing (AM) that use different technologies and materials have emerged, in which the 3D systems are used to produce objects through adding rather than subtracting materials, transforming essentially detailed design files to fully functional products, to directly or indirectly alleviate the burden associated with convectional manufacturing and assembly methods. In this paper, an extensive review has been done on several methods adopted in 3D printing. Example include: Fused Filament Fabrication (FFF), Selective Laser Sintering (SLS), Continuous Filament Fabrication (CFF), Stereolithography (SLA), Atomic Diffusion Additive Manufacturing (ADAM) and Selective Laser Melting (SLM). The various steps involve in operation and working principle of 3D printing technology was also stated. The paper also presents the applicable areas of 3-D printing focusing on tooling, aviation/aerospace, medical/biomechanical and city planning.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution
AU  - Onuh Ojogba Spencer
AU  - Olatunbosun Tafa Yusuf
AU  - Temidayo Christopher Tofade
Y1  - 2018/12/05
PY  - 2018
N1  - https://doi.org/10.11648/j.ajmie.20180305.12
DO  - 10.11648/j.ajmie.20180305.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 80
EP  - 90
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20180305.12
AB  - With the recent advancement in complexity of various technological products and the need for faster production, the quest for inventing new manufacturing technologies to reduce the design limitations such as the costs involved in purchasing and maintaining machines, the need for a trained operator, and increase in waste produced during machining in conventional manufacturing methods, has received significant boost in recent time with the advent of additive technology (AM) or 3D printing within various experts in industry, research & development institutes and universities, which invariably has not only enhanced deliverable on time and on budget of products, as well as ability to fabricate complex geometry with high precision and weight reduction. Several types of additive manufacturing (AM) that use different technologies and materials have emerged, in which the 3D systems are used to produce objects through adding rather than subtracting materials, transforming essentially detailed design files to fully functional products, to directly or indirectly alleviate the burden associated with convectional manufacturing and assembly methods. In this paper, an extensive review has been done on several methods adopted in 3D printing. Example include: Fused Filament Fabrication (FFF), Selective Laser Sintering (SLS), Continuous Filament Fabrication (CFF), Stereolithography (SLA), Atomic Diffusion Additive Manufacturing (ADAM) and Selective Laser Melting (SLM). The various steps involve in operation and working principle of 3D printing technology was also stated. The paper also presents the applicable areas of 3-D printing focusing on tooling, aviation/aerospace, medical/biomechanical and city planning.
VL  - 3
IS  - 5
ER  -

Copy | Download