Economic Evaluation of Asella Model-III Multi-crop Thresher

Tamrat Gebiso Challa

doi:doi:10.11648/j.ijae.20180303.12

| Peer-Reviewed

Economic Evaluation of Asella Model-III Multi-crop Thresher

Tamrat Gebiso Challa

Published in International Journal of Agricultural Economics (Volume 3, Issue 3)

Received: 5 April 2018 Accepted: 18 April 2018 Published: 22 May 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Wheat is one of the most popular crops in Arsi zone produced covering major farmlands specially on mid-highlands and parts of highland areas. Its production system is more advanced and supported by both biological and mechanical technologies relative to other crops in this area. But the mechanization of wheat is threatened by topographical inaccessibility in most highland areas of the zone. To solve this problem Asella Agricultural Engineering research center developed and tested its third version multi-crop thresher. Before the wider multiplication and dissemination of the technology, technical, economical and social acceptance and feasibility of the machine has to be studied. Therefore, this research activity was initiatedwith the objectives of evaluating financial, economicaland social feasibility of the machine vis-à-vis traditional and combines harvesting methods in Arsi zone under farmers’ conditions. Accordingly, the newly developed Asella model-III thresher was found to be economical compared to traditional animal trampling method.

Published in	International Journal of Agricultural Economics (Volume 3, Issue 3)
DOI	10.11648/j.ijae.20180303.12
Page(s)	45-52
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Economic Evaluation, Multi-crop Thresher, Combine Harvesting, Partial Budgeting, Pay-Back Period, Internal Rate of Return, Sensitivity Analysis

References

[1]	CADU (Chilalo Agricultural Development Unit). 1969. Progress Report No. 1. Implement Research Section. CADU Publication No. 32.
[2]	CADU (Chilalo Agricultural Development Unit). 1970. Progress Report No. 2. Implement Research Section. CADU Publication No. 52.
[3]	CADU (Chilalo Agricultural Development Unit). 1971. Progress Report No. 3. Implement Research Section. CADU Publication No. 79.
[4]	sJonsson, L-O. 1972. Possibilities for Improvement of Threshing Methods on the Ethiopian Highlands. Rural Development Publication No. 1.
[5]	HenockKifle. 1972. Investigations on Mechanized Farming and its Effect on Peasant Agriculture. CADU Publication No. 74.
[6]	Holmberg, J. 1972. Master Plan for the Evaluation of CADU. Planning and Evaluation Section CADU Publication No. 81.
[7]	Michael Stàhl, 1973: Contradiction in Agricultural Development; A study of three minimum package projects in southern Ethiopia; The Scandinavian Institute of African Studies; Uppsala.
[8]	Hassena, M., Regassa Ensermu, W. Mwangi, and H. Verkuijl., 2000. A Comparative Assessment of Combine Harvesting Visà-vis Conventional Harvesting and Threshing in Arsi Region,Ethiopia. Mexico, D. F.: International Maize and Wheat Improvement Center (CIMMYT) and Ethiopia Agricultural Research Organization (EARO).
[9]	Binswanger, H. 1978. The Economics of Tractors in South Asia: An Analytical Review. Hyderabad, India: International Crops Research Institute for the Semi-Arid Tropics (ICRISAT).
[10]	Gittinger, J.P. (1996), Economic Analysis of Agricultural Project, Washington, D.C. World Bank.
[11]	Kwazulu-Natal Agriculture, Environmental Affairs and Rural Development, 2013.Guide to machinery costs available on www.daff.gov.za/publications.

Cite This Article

Plain Text BibTeX RIS

APA Style

Tamrat Gebiso Challa. (2018). Economic Evaluation of Asella Model-III Multi-crop Thresher. International Journal of Agricultural Economics, 3(3), 45-52. https://doi.org/10.11648/j.ijae.20180303.12

Copy | Download

ACS Style

Tamrat Gebiso Challa. Economic Evaluation of Asella Model-III Multi-crop Thresher. Int. J. Agric. Econ. 2018, 3(3), 45-52. doi: 10.11648/j.ijae.20180303.12

Copy | Download

AMA Style

Tamrat Gebiso Challa. Economic Evaluation of Asella Model-III Multi-crop Thresher. Int J Agric Econ. 2018;3(3):45-52. doi: 10.11648/j.ijae.20180303.12

Copy | Download

@article{10.11648/j.ijae.20180303.12,
  author = {Tamrat Gebiso Challa},
  title = {Economic Evaluation of Asella Model-III Multi-crop Thresher},
  journal = {International Journal of Agricultural Economics},
  volume = {3},
  number = {3},
  pages = {45-52},
  doi = {10.11648/j.ijae.20180303.12},
  url = {https://doi.org/10.11648/j.ijae.20180303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijae.20180303.12},
  abstract = {Wheat is one of the most popular crops in Arsi zone produced covering major farmlands specially on mid-highlands and parts of highland areas. Its production system is more advanced and supported by both biological and mechanical technologies relative to other crops in this area. But the mechanization of wheat is threatened by topographical inaccessibility in most highland areas of the zone. To solve this problem Asella Agricultural Engineering research center developed and tested its third version multi-crop thresher. Before the wider multiplication and dissemination of the technology, technical, economical and social acceptance and feasibility of the machine has to be studied. Therefore, this research activity was initiatedwith the objectives of evaluating financial, economicaland social feasibility of the machine vis-à-vis traditional and combines harvesting methods in Arsi zone under farmers’ conditions. Accordingly, the newly developed Asella model-III thresher was found to be economical compared to traditional animal trampling method.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Economic Evaluation of Asella Model-III Multi-crop Thresher
AU  - Tamrat Gebiso Challa
Y1  - 2018/05/22
PY  - 2018
N1  - https://doi.org/10.11648/j.ijae.20180303.12
DO  - 10.11648/j.ijae.20180303.12
T2  - International Journal of Agricultural Economics
JF  - International Journal of Agricultural Economics
JO  - International Journal of Agricultural Economics
SP  - 45
EP  - 52
PB  - Science Publishing Group
SN  - 2575-3843
UR  - https://doi.org/10.11648/j.ijae.20180303.12
AB  - Wheat is one of the most popular crops in Arsi zone produced covering major farmlands specially on mid-highlands and parts of highland areas. Its production system is more advanced and supported by both biological and mechanical technologies relative to other crops in this area. But the mechanization of wheat is threatened by topographical inaccessibility in most highland areas of the zone. To solve this problem Asella Agricultural Engineering research center developed and tested its third version multi-crop thresher. Before the wider multiplication and dissemination of the technology, technical, economical and social acceptance and feasibility of the machine has to be studied. Therefore, this research activity was initiatedwith the objectives of evaluating financial, economicaland social feasibility of the machine vis-à-vis traditional and combines harvesting methods in Arsi zone under farmers’ conditions. Accordingly, the newly developed Asella model-III thresher was found to be economical compared to traditional animal trampling method.
VL  - 3
IS  - 3
ER  -

Copy | Download

Author Information

Tamrat Gebiso Challa

Socioeconomics Research Team, Asella Agricultural Engineering Research Center, Oromia Agricultural Research Institute, Asella, Ethiopia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Tamrat Gebiso Challa. (2018). Economic Evaluation of Asella Model-III Multi-crop Thresher. International Journal of Agricultural Economics, 3(3), 45-52. https://doi.org/10.11648/j.ijae.20180303.12

Copy | Download

ACS Style

Tamrat Gebiso Challa. Economic Evaluation of Asella Model-III Multi-crop Thresher. Int. J. Agric. Econ. 2018, 3(3), 45-52. doi: 10.11648/j.ijae.20180303.12

Copy | Download

AMA Style

Tamrat Gebiso Challa. Economic Evaluation of Asella Model-III Multi-crop Thresher. Int J Agric Econ. 2018;3(3):45-52. doi: 10.11648/j.ijae.20180303.12

Copy | Download

@article{10.11648/j.ijae.20180303.12,
  author = {Tamrat Gebiso Challa},
  title = {Economic Evaluation of Asella Model-III Multi-crop Thresher},
  journal = {International Journal of Agricultural Economics},
  volume = {3},
  number = {3},
  pages = {45-52},
  doi = {10.11648/j.ijae.20180303.12},
  url = {https://doi.org/10.11648/j.ijae.20180303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijae.20180303.12},
  abstract = {Wheat is one of the most popular crops in Arsi zone produced covering major farmlands specially on mid-highlands and parts of highland areas. Its production system is more advanced and supported by both biological and mechanical technologies relative to other crops in this area. But the mechanization of wheat is threatened by topographical inaccessibility in most highland areas of the zone. To solve this problem Asella Agricultural Engineering research center developed and tested its third version multi-crop thresher. Before the wider multiplication and dissemination of the technology, technical, economical and social acceptance and feasibility of the machine has to be studied. Therefore, this research activity was initiatedwith the objectives of evaluating financial, economicaland social feasibility of the machine vis-à-vis traditional and combines harvesting methods in Arsi zone under farmers’ conditions. Accordingly, the newly developed Asella model-III thresher was found to be economical compared to traditional animal trampling method.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Economic Evaluation of Asella Model-III Multi-crop Thresher
AU  - Tamrat Gebiso Challa
Y1  - 2018/05/22
PY  - 2018
N1  - https://doi.org/10.11648/j.ijae.20180303.12
DO  - 10.11648/j.ijae.20180303.12
T2  - International Journal of Agricultural Economics
JF  - International Journal of Agricultural Economics
JO  - International Journal of Agricultural Economics
SP  - 45
EP  - 52
PB  - Science Publishing Group
SN  - 2575-3843
UR  - https://doi.org/10.11648/j.ijae.20180303.12
AB  - Wheat is one of the most popular crops in Arsi zone produced covering major farmlands specially on mid-highlands and parts of highland areas. Its production system is more advanced and supported by both biological and mechanical technologies relative to other crops in this area. But the mechanization of wheat is threatened by topographical inaccessibility in most highland areas of the zone. To solve this problem Asella Agricultural Engineering research center developed and tested its third version multi-crop thresher. Before the wider multiplication and dissemination of the technology, technical, economical and social acceptance and feasibility of the machine has to be studied. Therefore, this research activity was initiatedwith the objectives of evaluating financial, economicaland social feasibility of the machine vis-à-vis traditional and combines harvesting methods in Arsi zone under farmers’ conditions. Accordingly, the newly developed Asella model-III thresher was found to be economical compared to traditional animal trampling method.
VL  - 3
IS  - 3
ER  -

Copy | Download