American Journal of Civil Engineering

| Peer-Reviewed |

Analysis of Flanged Rectangular Waveguide Probe for Nondestructive Absorbing Materials Characterization Using FDTD Simulation

Received: 02 November 2014    Accepted: 11 December 2014    Published: 02 July 2015
Views:       Downloads:

Share This Article

Abstract

In this paper, the flanged open-ended rectangular waveguide probe technique is studied using Finite Difference Time-Domain simulation (FDTD). Both generally lossy and high loss electromagnetic materials are considered to investigate the influence of probe flange size, operating frequency and sample thickness on complex permittivity (εr) and permeability (μr) and thickness measurement. Variations in the probe flange size for different frequencies, material under test type and thickness are simulated. It is found that using of waveguide probe with finite flange affects probe input reflection coefficient substantially in some cases. To verify the obtained simulations results, a series of experiments are conducted for this purpose. Both εr and μr of material under test under different measurement conditions are extracted using FDTD modeling and compared with reference data. In order to evaluate the degree of accuracy of this technique, error analysis to various sources of errors and most importantly the effect of finite flange size are also demonstrated by using the measured data compared with the analytical model results. Simulations and measurements results have shown that the consideration of probe flange large enough for the practical purpose to be infinite is restricted by the constitutive parameters (εr and μr) and operating frequency as well as the thickness of the material under test. The FDTD simulations and experiments results are presented.

DOI 10.11648/j.ajce.20150304.13
Published in American Journal of Civil Engineering (Volume 3, Issue 4, July 2015)
Page(s) 107-115
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

FDTD, Numerical Analysis, Error Analysis, Complex Permittivity and Permeability, Rectangular Waveguide, Reflection Coefficient, EM Properties

References
[1] E. Nyfors and P. Vainikainen, Industrial Microwave Sensors, Artech House, 1989.
[2] M. Hirano, M. Takahashi, and M. Abe, “A study on reflection coefficient from lossy dielectric by using flanged rectangular waveguide,” IEICE Trans. Electron. vol. J82-C-I, no.5, pp.283–287, May 1999.
[3] Mazlumi, F., S. H. H. Sadeghi, and R. Moini, “Interaction of an open-ended rectangular waveguide probe with an arbitrary- shape surface crack in a lossy conductor," IEEE Trans. Microwave Theory Tech., Vol. 54, No. 10, pp. 3706,-3711, 2006.
[4] Hyde IV, M. W., J. W. Stewart, M. J. Havrilla, W. P. Baker, E. J. Rothwell, and D. P. Nyquist, “Nondestructive electromagnetic material characterization using a dual waveguide probe: A full wave solution," Radio Sci., Vol. 44, RS 3013, 2009.
[5] S. Bakhtiary, S. I. Ganchev and R. Zoughi, “ Open-ended rectangular waveguide for nondestructive thickness measurement and variation detection of lossy dielectric slabs backed by a conducting plate,” IEEE Trans. IM, vol. IM-42, pp. 19-42, 1993
[6] Maode, N., S. Yong, Y. Jinkui, F. Chrnpung, and X. Deming, “An improved open-ended waveguide measurement technique on parameters εr and μr of high- loss materials," IEEE Trans.Instrum. Meas., Vol. 47, No. 2, pp. 476-481, April 1999.
[7] Stewart, J. W. and M. J. Havrilla, “Electromagnetic characterization of a magnetic material using an open- ended waveguide probe and a rigorous full-wave multimode model," in Journal of Electromagnetic Waves and Applications, Vol. 20, No. 14, pp. 2037-2052, 2006.
[8] G. D. Dester” Error analysis of a two-layer method for the electromagnetic characterization of conductor- backed absorbing materials using an open-ended waveguide probe” Progress In Electromagnetics Research B, Vol. 26, pp. 1-21, 2010.
[9] Abdulkhadim A. Hasan, D. Xu, and Y. J.Zhang" Modeling and analysis of finite flange open-ended coaxial probe for planar and convex surface coating material testing by FDTD-method," Microwave and Optical Technology Letters, vol. 24 no. 2, pp. 117- 120, January 2000.
[10] K. Shibata O. Hashimoto, and R. K. Pokharel” Analysis of error due to exclusion of higher modes on complex permittivity measurement using waveguide with flange” IEICE Trans. Electron, Vol.E88–C, NO.1 January 2005 pp. 139-142
[11] Abdulkhadim A. Hasan, D. Xu, Z. Lin , and N. Maode” A Modified open- ended coaxial probe for concave surface coating materials testing,” 2000 IEEE MTTs International Microwave Symposium Digest.
[12] F. Kung and H. T. Chuah’ A Finite-Difference Time- Domain (FDTD) software for simulation of printed circuit board (PCB) assembly’ Progress In Electromagnetics Research, PIER 50, pp. 299–335, 2005.
[13] C.-W. Chang, K.-U. Chen, and J. Qian, “Nondestructive determination of electromagnetic parameters of dielectric materials at X-band frequencies using a waveguide probe system,” IEEE Trans. Instrum. Meas., vol. 46, no. 5, pp. 1084–1092, Oct. 1997.
[14] K. S. Yee,”Numerical solution of initial boundary-value problems involving Maxwell’s equations in isotropic media”, IEEE Trans Antenna Propag. AP, vol.14. pp. 302-307, 1966.
[15] A. Taflove and M. E. Brodwin, “ Numerical solution of steady-state electromagnetic scattering problems using the time-dependent Maxwell’s equations, “IEEE Trans, Microwave Theory Tech, vol, MTT-23, pp. 623-630, 1975.
[16] G. Mur,”Absorbing boundary condition for the finite- difference approximation of the time-domain electroma- gnetic field equations”, IEEE Trans. Eectromag. Compat. EMC-22, pp. 377-382, 1981.
[17] M. T. Ghasr, Devin Simms, and R. Zoughi,” Multimodal solution for a waveguide radiating into multilayered structures—dielectric property and thickness evaluation” IEEE Trans. Inst & Meas, vol. 58, NO. 5, pp. 1505-1513, May 2009.
[18] S. Wang, Abdulkadhim A. Hasan, N. Moade and X. Deming,” A Swept-frequency technique with an open-ended waveguide sensor for nondestructive, simultaneous determination of thickness, permittivity and permeability of radar absorbing coatings” 1998 Asia Pacific Microwave Conference, pp 129-132.
[19] Emerson & Cuming, Microwave Products, Inc., ECCOSORB R°FGM Permittivity & Permeability Data," 2007
[20] W. H. Press, S. A. Teukolsky, W. T. Vetterling and B. P. Flannery, Numerical Receips in C+, second Edition, Cambridge University Press, 1992
Author Information
  • Department of Electronics and Communications Engineering, Kufa University, Al-Najaf, Iraq

Cite This Article
  • APA Style

    Abdulkadhim A. Hasan. (2015). Analysis of Flanged Rectangular Waveguide Probe for Nondestructive Absorbing Materials Characterization Using FDTD Simulation. American Journal of Civil Engineering, 3(4), 107-115. https://doi.org/10.11648/j.ajce.20150304.13

    Copy | Download

    ACS Style

    Abdulkadhim A. Hasan. Analysis of Flanged Rectangular Waveguide Probe for Nondestructive Absorbing Materials Characterization Using FDTD Simulation. Am. J. Civ. Eng. 2015, 3(4), 107-115. doi: 10.11648/j.ajce.20150304.13

    Copy | Download

    AMA Style

    Abdulkadhim A. Hasan. Analysis of Flanged Rectangular Waveguide Probe for Nondestructive Absorbing Materials Characterization Using FDTD Simulation. Am J Civ Eng. 2015;3(4):107-115. doi: 10.11648/j.ajce.20150304.13

    Copy | Download

  • @article{10.11648/j.ajce.20150304.13,
      author = {Abdulkadhim A. Hasan},
      title = {Analysis of Flanged Rectangular Waveguide Probe for Nondestructive Absorbing Materials Characterization Using FDTD Simulation},
      journal = {American Journal of Civil Engineering},
      volume = {3},
      number = {4},
      pages = {107-115},
      doi = {10.11648/j.ajce.20150304.13},
      url = {https://doi.org/10.11648/j.ajce.20150304.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajce.20150304.13},
      abstract = {In this paper, the flanged open-ended rectangular waveguide probe technique is studied using Finite Difference Time-Domain simulation (FDTD). Both generally lossy and high loss electromagnetic materials are considered to investigate the influence of probe flange size, operating frequency and sample thickness on complex permittivity (εr) and permeability (μr) and thickness measurement. Variations in the probe flange size for different frequencies, material under test type and thickness are simulated. It is found that using of waveguide probe with finite flange affects probe input reflection coefficient substantially in some cases. To verify the obtained simulations results, a series of experiments are conducted for this purpose. Both εr and μr of material under test under different measurement conditions are extracted using FDTD modeling and compared with reference data. In order to evaluate the degree of accuracy of this technique, error analysis to various sources of errors and most importantly the effect of finite flange size are also demonstrated by using the measured data compared with the analytical model results. Simulations and measurements results have shown that the consideration of probe flange large enough for the practical purpose to be infinite is restricted by the constitutive parameters (εr and μr) and operating frequency as well as the thickness of the material under test. The FDTD simulations and experiments results are presented.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Analysis of Flanged Rectangular Waveguide Probe for Nondestructive Absorbing Materials Characterization Using FDTD Simulation
    AU  - Abdulkadhim A. Hasan
    Y1  - 2015/07/02
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ajce.20150304.13
    DO  - 10.11648/j.ajce.20150304.13
    T2  - American Journal of Civil Engineering
    JF  - American Journal of Civil Engineering
    JO  - American Journal of Civil Engineering
    SP  - 107
    EP  - 115
    PB  - Science Publishing Group
    SN  - 2330-8737
    UR  - https://doi.org/10.11648/j.ajce.20150304.13
    AB  - In this paper, the flanged open-ended rectangular waveguide probe technique is studied using Finite Difference Time-Domain simulation (FDTD). Both generally lossy and high loss electromagnetic materials are considered to investigate the influence of probe flange size, operating frequency and sample thickness on complex permittivity (εr) and permeability (μr) and thickness measurement. Variations in the probe flange size for different frequencies, material under test type and thickness are simulated. It is found that using of waveguide probe with finite flange affects probe input reflection coefficient substantially in some cases. To verify the obtained simulations results, a series of experiments are conducted for this purpose. Both εr and μr of material under test under different measurement conditions are extracted using FDTD modeling and compared with reference data. In order to evaluate the degree of accuracy of this technique, error analysis to various sources of errors and most importantly the effect of finite flange size are also demonstrated by using the measured data compared with the analytical model results. Simulations and measurements results have shown that the consideration of probe flange large enough for the practical purpose to be infinite is restricted by the constitutive parameters (εr and μr) and operating frequency as well as the thickness of the material under test. The FDTD simulations and experiments results are presented.
    VL  - 3
    IS  - 4
    ER  - 

    Copy | Download

  • Sections