Reservoir Formation Damage due to Mud Filtration

Abdolreza Dabiri; Mohammad Afkhami; Hooman Fallah

doi:doi:10.11648/j.ajche.20130101.11

| Peer-Reviewed

Reservoir Formation Damage due to Mud Filtration

Abdolreza Dabiri, Mohammad Afkhami, Hooman Fallah

Published in American Journal of Chemical Engineering (Volume 1, Issue 1)

Received: 17 May 2013 Accepted: Published: 30 May 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Transport of particle suspensions in oil reservoirs is an essential phenomenon in many oil industry processes. Solid and liquid particles dispersed in the drilling fluid (mud) are trapped by the rock (porous medium) and permeability decline takes place during drilling fluid invasion into reservoir resulting in formation damage. The formation damage due to mud filtration is explained by erosion of external filter cake. Nevertheless, the stabilization is observed in core floods, which evidences internal erosion. A new mathematical model for detachment of particles is based on mechanical equilibrium of a particle positioned on the internal cake or matrix surface in the pore space. In the current work the analytical solution obtained for mud filtration with one particle capture mechanism with damage stabilization. The particle torque equilibrium is determined by the dimensionless ratio between the drag and normal forces acting on the particle. The maximum retention function of the dimensionless ratio closes system of governing equations for colloid transport through porous medium.

Published in	American Journal of Chemical Engineering (Volume 1, Issue 1)
DOI	10.11648/j.ajche.20130101.11
Page(s)	1-5
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Formation Damage, Drilling Mud, Classical Filtration, Maximum Retention Function External Filter Cake

References

[1]	Civan, F, "Reservoir Formation Damage (Fundamentals, Modeling, Assessment and Mitigation)," Gulf Professional Publishing, 2nd (2006).
[2]	Payatakes, A.C. et al., "Application of Porous Medium models to the Study of Deep Bed Filtration," Can. J. Chem. Eng., 52, 727 (1974).
[3]	Barkman, J. H. and D. H. Davidson, "Measuring Water Quality and Predicting Well Impairment," Journal of Petroleum Technology 253(July)1972 : 865-873.
[4]	Davison , E.C, "Particle Transport in Sandstone ," paper SPE 6905 presented at the 1977 SPE Annual Technical Conference and Exhibition, Denver, Colorado, 12 October.
[5]	Todd, A.C., et al., "Review of Permeability Damage Stodies and Related North Sea Water Injection," Paper SPE 7883 presented at the 1979 SPE International Symosium on Oilfield and Geothermal Chemistry, Dallas, 22-24 January.
[6]	Todd, A.C., et al., "The Application of Depth of Formation Damage Measurments in Predicted Water Injectivity Decline," Paper SPE 12498 presented at the 1984 SPE Formation Damage Control Symposium held in Bakersfield," California, 13-14 Februry.
[7]	Jiao, D. and M.M. Sharma, "Mechanism of Cake Buildup in Crossflow Filtration of Colloidal Suspensions," Journal of Colloidal and Interfacial Science, 1994. 162:p. 454-462.
[8]	Herzig, J.P., Leclerc, D.M., Le Goff, P., "Flow of Suspensions through Porous Media," J. Ind. Eng. Chem. 65(5), 8-35 (1970).
[9]	Pang, S. and M.M. Sharma, "A Model for Predicting Injectivity Decline in Water Injection Wells," SPEFE, 1997: p. 194-201.

Cite This Article

Plain Text BibTeX RIS

APA Style

Abdolreza Dabiri, Mohammad Afkhami, Hooman Fallah. (2013). Reservoir Formation Damage due to Mud Filtration. American Journal of Chemical Engineering, 1(1), 1-5. https://doi.org/10.11648/j.ajche.20130101.11

Copy | Download

ACS Style

Abdolreza Dabiri; Mohammad Afkhami; Hooman Fallah. Reservoir Formation Damage due to Mud Filtration. Am. J. Chem. Eng. 2013, 1(1), 1-5. doi: 10.11648/j.ajche.20130101.11

Copy | Download

AMA Style

Abdolreza Dabiri, Mohammad Afkhami, Hooman Fallah. Reservoir Formation Damage due to Mud Filtration. Am J Chem Eng. 2013;1(1):1-5. doi: 10.11648/j.ajche.20130101.11

Copy | Download

@article{10.11648/j.ajche.20130101.11,
  author = {Abdolreza Dabiri and Mohammad Afkhami and Hooman Fallah},
  title = {Reservoir Formation Damage due to Mud Filtration},
  journal = {American Journal of Chemical Engineering},
  volume = {1},
  number = {1},
  pages = {1-5},
  doi = {10.11648/j.ajche.20130101.11},
  url = {https://doi.org/10.11648/j.ajche.20130101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20130101.11},
  abstract = {Transport of particle suspensions in oil reservoirs is an essential phenomenon in many oil industry processes. Solid and liquid particles dispersed in the drilling fluid (mud) are trapped by the rock (porous medium) and permeability decline takes place during drilling fluid invasion into reservoir resulting in formation damage. The formation damage due to mud filtration is explained by erosion of external filter cake. Nevertheless, the stabilization is observed in core floods, which evidences internal erosion. A new mathematical model for detachment of particles is based on mechanical equilibrium of a particle positioned on the internal cake or matrix surface in the pore space. In the current work the analytical solution obtained for mud filtration with one particle capture mechanism with damage stabilization. The particle torque equilibrium is determined by the dimensionless ratio between the drag and normal forces acting on the particle. The maximum retention function of the dimensionless ratio closes system of governing equations for colloid transport through porous medium.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Reservoir Formation Damage due to Mud Filtration
AU  - Abdolreza Dabiri
AU  - Mohammad Afkhami
AU  - Hooman Fallah
Y1  - 2013/05/30
PY  - 2013
N1  - https://doi.org/10.11648/j.ajche.20130101.11
DO  - 10.11648/j.ajche.20130101.11
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20130101.11
AB  - Transport of particle suspensions in oil reservoirs is an essential phenomenon in many oil industry processes. Solid and liquid particles dispersed in the drilling fluid (mud) are trapped by the rock (porous medium) and permeability decline takes place during drilling fluid invasion into reservoir resulting in formation damage. The formation damage due to mud filtration is explained by erosion of external filter cake. Nevertheless, the stabilization is observed in core floods, which evidences internal erosion. A new mathematical model for detachment of particles is based on mechanical equilibrium of a particle positioned on the internal cake or matrix surface in the pore space. In the current work the analytical solution obtained for mud filtration with one particle capture mechanism with damage stabilization. The particle torque equilibrium is determined by the dimensionless ratio between the drag and normal forces acting on the particle. The maximum retention function of the dimensionless ratio closes system of governing equations for colloid transport through porous medium.
VL  - 1
IS  - 1
ER  -

Copy | Download

Author Information

Abdolreza Dabiri

Department of Petroleum Engineering, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran
Mohammad Afkhami

Department of Petroleum Engineering, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran
Hooman Fallah

Department of Petroleum Engineering, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Abdolreza Dabiri, Mohammad Afkhami, Hooman Fallah. (2013). Reservoir Formation Damage due to Mud Filtration. American Journal of Chemical Engineering, 1(1), 1-5. https://doi.org/10.11648/j.ajche.20130101.11

Copy | Download

ACS Style

Abdolreza Dabiri; Mohammad Afkhami; Hooman Fallah. Reservoir Formation Damage due to Mud Filtration. Am. J. Chem. Eng. 2013, 1(1), 1-5. doi: 10.11648/j.ajche.20130101.11

Copy | Download

AMA Style

Abdolreza Dabiri, Mohammad Afkhami, Hooman Fallah. Reservoir Formation Damage due to Mud Filtration. Am J Chem Eng. 2013;1(1):1-5. doi: 10.11648/j.ajche.20130101.11

Copy | Download

@article{10.11648/j.ajche.20130101.11,
  author = {Abdolreza Dabiri and Mohammad Afkhami and Hooman Fallah},
  title = {Reservoir Formation Damage due to Mud Filtration},
  journal = {American Journal of Chemical Engineering},
  volume = {1},
  number = {1},
  pages = {1-5},
  doi = {10.11648/j.ajche.20130101.11},
  url = {https://doi.org/10.11648/j.ajche.20130101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20130101.11},
  abstract = {Transport of particle suspensions in oil reservoirs is an essential phenomenon in many oil industry processes. Solid and liquid particles dispersed in the drilling fluid (mud) are trapped by the rock (porous medium) and permeability decline takes place during drilling fluid invasion into reservoir resulting in formation damage. The formation damage due to mud filtration is explained by erosion of external filter cake. Nevertheless, the stabilization is observed in core floods, which evidences internal erosion. A new mathematical model for detachment of particles is based on mechanical equilibrium of a particle positioned on the internal cake or matrix surface in the pore space. In the current work the analytical solution obtained for mud filtration with one particle capture mechanism with damage stabilization. The particle torque equilibrium is determined by the dimensionless ratio between the drag and normal forces acting on the particle. The maximum retention function of the dimensionless ratio closes system of governing equations for colloid transport through porous medium.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Reservoir Formation Damage due to Mud Filtration
AU  - Abdolreza Dabiri
AU  - Mohammad Afkhami
AU  - Hooman Fallah
Y1  - 2013/05/30
PY  - 2013
N1  - https://doi.org/10.11648/j.ajche.20130101.11
DO  - 10.11648/j.ajche.20130101.11
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20130101.11
AB  - Transport of particle suspensions in oil reservoirs is an essential phenomenon in many oil industry processes. Solid and liquid particles dispersed in the drilling fluid (mud) are trapped by the rock (porous medium) and permeability decline takes place during drilling fluid invasion into reservoir resulting in formation damage. The formation damage due to mud filtration is explained by erosion of external filter cake. Nevertheless, the stabilization is observed in core floods, which evidences internal erosion. A new mathematical model for detachment of particles is based on mechanical equilibrium of a particle positioned on the internal cake or matrix surface in the pore space. In the current work the analytical solution obtained for mud filtration with one particle capture mechanism with damage stabilization. The particle torque equilibrium is determined by the dimensionless ratio between the drag and normal forces acting on the particle. The maximum retention function of the dimensionless ratio closes system of governing equations for colloid transport through porous medium.
VL  - 1
IS  - 1
ER  -

Copy | Download