Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications

Zerendu Chikaodinaka Christian; Ameji John Philip; Haruna Muhammad Idris; Zaharaddeen Shehu

doi:doi:10.11648/j.ajche.20170506.12

| Peer-Reviewed

Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications

Zerendu Chikaodinaka Christian, Ameji John Philip, Haruna Muhammad Idris, Zaharaddeen Shehu

Published in American Journal of Chemical Engineering (Volume 5, Issue 6)

Received: 11 September 2017 Accepted: 26 September 2017 Published: 11 November 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The kaolin sample from Alkaleri in Bauchi State was analyzed to ascertain its metal and metal oxides content and to investigate their potential use for industrial purposes. Neutron activation analysis technique was used for the metals while the turbimetric and Molybdenum Blue methods were used to determine the sulphates and phosphates respectively. The result showed that the Alkaleri kaolin with Fe (1.3 x 10^-3%), K₂O(0.53%), Na₂O( 0.018%), TiO2 (4.6x10^-4%), meets the specification for paper, ceramics, rubber, porcelain, pharmaceutics, cosmetics and glaze production but its alumina content is slightly below the minimum requirement for these uses except for rubber for which the content is within the specified value and for tiles for which the value is slightly above the specification. The combination of sulphate and phosphate contents which are 4.71% and 2.18ppm respectively could increase their absorbing property and makes them more useful for medicinal and cosmetic purposes. The pH value of the kaolin was found to be 4.3 which makes it unsuitable for most industrial purposes, e.g. rubber and plastic production, the pH need to be increased to 5-7 range (the preferred value for most industrial uses). The nitrate and chloride contents indicated values of 18ppm and 0.3ppm respectively.

Published in	American Journal of Chemical Engineering (Volume 5, Issue 6)
DOI	10.11648/j.ajche.20170506.12
Page(s)	130-134
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Alkaleri, Kaolin, Neutron Activation, Metals, Metal Oxide

References

[1]	Ground report (2016). What makes kaolin clay different from kaolinite clay. Retrieved 07 August, 2017 from https://www.groundreport.com/makes-kaolin-clay-different-kaolinite-clay
[2]	Newman, A., 1987. Chemistry of Clay and Clay Minerals, Min. Soc. Mon., London, 6, 480.
[3]	Konta, J., 1980. Properties of ceramic raw materials. Ceramic monographs. Handbook of ceramics, Schmid -Freiburg, 1-32.
[4]	Murray, H., 2000. Traditional and new applications for kaolin, smectite, and palygorskite: a general overview, Applied Clay Science, Vol. 17, No. 5-6, 207-221.
[5]	Cravero, F., Gonzalez, I., Galan, E., and Dominguez, E., 1997. Geology, mineralogy, origin and possible applications of some Argentinian kaolins in the Neuquen basin. Applied Clay Science, Vol. 12, No. 1-2, 27-42.
[6]	Prasad, M., Reid K. and Murray H., 1991. Kaolin: processing, properties and applications. Applied Clay Science, Vol. 6, No. 2, 87-119.
[7]	Murray, H., 1991. Overview—clay mineral applications. Applied Clay Science, Vol. 5, No. 5-6, 379-395.
[8]	Burst, J., 1991. The application of clay minerals in ceramics. Applied Clay Science, Vol. 5, No. 5-6, 421-443.
[9]	Murray, H., and Kogel, J., 2005. Engineered clay products for the paper industry, Applied Clay Science, Vol. 29, No. 3-4, 199-206.
[10]	Velho J. and Gomes, C., 1991. Characterization of Portuguese kaolins for the paper industry: beneficiation through new delamination techniques. Applied Clay Science, Vol. 6, No. 2, 155-170.
[11]	Bundy, W., and Ishley J., 1991. Kaolin in paper filling and coating. Applied Clay Science, Vol. 5, No. 5-6, 397-420.
[12]	Schupp, J. R., Fallahi, E., and Chun, I.-. J., 2004. Effect of Particle Film on Fruit Sunburn, Maturity and Quality of “Fuji” and “Honeycrisp” Apples. Acta Hort. (ISHS) Vol. 636, 551-556.
[13]	Jonah, S. A., Umar, I. M., Oladipo, M. O. A., Balogun, G. I. and Adeyomo, D. J. (2006): Standardization of NIRR-1 Irradiation and Counting Facilities for Instrumental Activation Analysis. J. Applied Radiation and Isotopes, 64: 818 – 822.
[14]	Johnstone, S. J., Johnstone, M. G. (1961). Minerals for the Chemical and Allied Industries. In: Ahmed, K. S. (1986). Development of Phospate-Bonded Fire Clay Refractory Castables. Unpublish M. Sc. Thesis, Department of Chemical Engineering, Ahmadu Bello University, Zaria.
[15]	Hansen, T. (2003). Titanium oxide, Titania. Ceramic materials Data Base. Retrieved 10 August, 2017 from http://ceramicmaterials.com/com/cermat/html

Cite This Article

Plain Text BibTeX RIS

APA Style

Zerendu Chikaodinaka Christian, Ameji John Philip, Haruna Muhammad Idris, Zaharaddeen Shehu. (2017). Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications. American Journal of Chemical Engineering, 5(6), 130-134. https://doi.org/10.11648/j.ajche.20170506.12

Copy | Download

ACS Style

Zerendu Chikaodinaka Christian; Ameji John Philip; Haruna Muhammad Idris; Zaharaddeen Shehu. Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications. Am. J. Chem. Eng. 2017, 5(6), 130-134. doi: 10.11648/j.ajche.20170506.12

Copy | Download

AMA Style

Zerendu Chikaodinaka Christian, Ameji John Philip, Haruna Muhammad Idris, Zaharaddeen Shehu. Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications. Am J Chem Eng. 2017;5(6):130-134. doi: 10.11648/j.ajche.20170506.12

Copy | Download

@article{10.11648/j.ajche.20170506.12,
  author = {Zerendu Chikaodinaka Christian and Ameji John Philip and Haruna Muhammad Idris and Zaharaddeen Shehu},
  title = {Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications},
  journal = {American Journal of Chemical Engineering},
  volume = {5},
  number = {6},
  pages = {130-134},
  doi = {10.11648/j.ajche.20170506.12},
  url = {https://doi.org/10.11648/j.ajche.20170506.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20170506.12},
  abstract = {The kaolin sample from Alkaleri in Bauchi State was analyzed to ascertain its metal and metal oxides content and to investigate their potential use for industrial purposes. Neutron activation analysis technique was used for the metals while the turbimetric and Molybdenum Blue methods were used to determine the sulphates and phosphates respectively. The result showed that the Alkaleri kaolin with Fe (1.3 x 10-3%), K2O(0.53%), Na2O( 0.018%), TiO2 (4.6x10-4%), meets the specification for paper, ceramics, rubber, porcelain, pharmaceutics, cosmetics and glaze production but its alumina content is slightly below the minimum requirement for these uses except for rubber for which the content is within the specified value and for tiles for which the value is slightly above the specification. The combination of sulphate and phosphate contents which are 4.71% and 2.18ppm respectively could increase their absorbing property and makes them more useful for medicinal and cosmetic purposes. The pH value of the kaolin was found to be 4.3 which makes it unsuitable for most industrial purposes, e.g. rubber and plastic production, the pH need to be increased to 5-7 range (the preferred value for most industrial uses). The nitrate and chloride contents indicated values of 18ppm and 0.3ppm respectively.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications
AU  - Zerendu Chikaodinaka Christian
AU  - Ameji John Philip
AU  - Haruna Muhammad Idris
AU  - Zaharaddeen Shehu
Y1  - 2017/11/11
PY  - 2017
N1  - https://doi.org/10.11648/j.ajche.20170506.12
DO  - 10.11648/j.ajche.20170506.12
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 130
EP  - 134
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20170506.12
AB  - The kaolin sample from Alkaleri in Bauchi State was analyzed to ascertain its metal and metal oxides content and to investigate their potential use for industrial purposes. Neutron activation analysis technique was used for the metals while the turbimetric and Molybdenum Blue methods were used to determine the sulphates and phosphates respectively. The result showed that the Alkaleri kaolin with Fe (1.3 x 10-3%), K2O(0.53%), Na2O( 0.018%), TiO2 (4.6x10-4%), meets the specification for paper, ceramics, rubber, porcelain, pharmaceutics, cosmetics and glaze production but its alumina content is slightly below the minimum requirement for these uses except for rubber for which the content is within the specified value and for tiles for which the value is slightly above the specification. The combination of sulphate and phosphate contents which are 4.71% and 2.18ppm respectively could increase their absorbing property and makes them more useful for medicinal and cosmetic purposes. The pH value of the kaolin was found to be 4.3 which makes it unsuitable for most industrial purposes, e.g. rubber and plastic production, the pH need to be increased to 5-7 range (the preferred value for most industrial uses). The nitrate and chloride contents indicated values of 18ppm and 0.3ppm respectively.
VL  - 5
IS  - 6
ER  -

Copy | Download

Author Information

Zerendu Chikaodinaka Christian

Department of Chemistry, Ahmadu Bello University, Zaria, Nigeria
Ameji John Philip

Department of Chemistry, Ahmadu Bello University, Zaria, Nigeria
Haruna Muhammad Idris

Department of Chemistry, Audu Bako College of Agriculture, Dambatta, Kano, Nigeria
Zaharaddeen Shehu

Department of Science Laboratory Technology, Jigawa State Polytechnic, Dutse, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zerendu Chikaodinaka Christian, Ameji John Philip, Haruna Muhammad Idris, Zaharaddeen Shehu. (2017). Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications. American Journal of Chemical Engineering, 5(6), 130-134. https://doi.org/10.11648/j.ajche.20170506.12

Copy | Download

ACS Style

Zerendu Chikaodinaka Christian; Ameji John Philip; Haruna Muhammad Idris; Zaharaddeen Shehu. Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications. Am. J. Chem. Eng. 2017, 5(6), 130-134. doi: 10.11648/j.ajche.20170506.12

Copy | Download

AMA Style

Zerendu Chikaodinaka Christian, Ameji John Philip, Haruna Muhammad Idris, Zaharaddeen Shehu. Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications. Am J Chem Eng. 2017;5(6):130-134. doi: 10.11648/j.ajche.20170506.12

Copy | Download

@article{10.11648/j.ajche.20170506.12,
  author = {Zerendu Chikaodinaka Christian and Ameji John Philip and Haruna Muhammad Idris and Zaharaddeen Shehu},
  title = {Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications},
  journal = {American Journal of Chemical Engineering},
  volume = {5},
  number = {6},
  pages = {130-134},
  doi = {10.11648/j.ajche.20170506.12},
  url = {https://doi.org/10.11648/j.ajche.20170506.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20170506.12},
  abstract = {The kaolin sample from Alkaleri in Bauchi State was analyzed to ascertain its metal and metal oxides content and to investigate their potential use for industrial purposes. Neutron activation analysis technique was used for the metals while the turbimetric and Molybdenum Blue methods were used to determine the sulphates and phosphates respectively. The result showed that the Alkaleri kaolin with Fe (1.3 x 10-3%), K2O(0.53%), Na2O( 0.018%), TiO2 (4.6x10-4%), meets the specification for paper, ceramics, rubber, porcelain, pharmaceutics, cosmetics and glaze production but its alumina content is slightly below the minimum requirement for these uses except for rubber for which the content is within the specified value and for tiles for which the value is slightly above the specification. The combination of sulphate and phosphate contents which are 4.71% and 2.18ppm respectively could increase their absorbing property and makes them more useful for medicinal and cosmetic purposes. The pH value of the kaolin was found to be 4.3 which makes it unsuitable for most industrial purposes, e.g. rubber and plastic production, the pH need to be increased to 5-7 range (the preferred value for most industrial uses). The nitrate and chloride contents indicated values of 18ppm and 0.3ppm respectively.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Chemical Investigation of Alkaleri Kaolin Deposit for Its Potential Industrial Applications
AU  - Zerendu Chikaodinaka Christian
AU  - Ameji John Philip
AU  - Haruna Muhammad Idris
AU  - Zaharaddeen Shehu
Y1  - 2017/11/11
PY  - 2017
N1  - https://doi.org/10.11648/j.ajche.20170506.12
DO  - 10.11648/j.ajche.20170506.12
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 130
EP  - 134
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20170506.12
AB  - The kaolin sample from Alkaleri in Bauchi State was analyzed to ascertain its metal and metal oxides content and to investigate their potential use for industrial purposes. Neutron activation analysis technique was used for the metals while the turbimetric and Molybdenum Blue methods were used to determine the sulphates and phosphates respectively. The result showed that the Alkaleri kaolin with Fe (1.3 x 10-3%), K2O(0.53%), Na2O( 0.018%), TiO2 (4.6x10-4%), meets the specification for paper, ceramics, rubber, porcelain, pharmaceutics, cosmetics and glaze production but its alumina content is slightly below the minimum requirement for these uses except for rubber for which the content is within the specified value and for tiles for which the value is slightly above the specification. The combination of sulphate and phosphate contents which are 4.71% and 2.18ppm respectively could increase their absorbing property and makes them more useful for medicinal and cosmetic purposes. The pH value of the kaolin was found to be 4.3 which makes it unsuitable for most industrial purposes, e.g. rubber and plastic production, the pH need to be increased to 5-7 range (the preferred value for most industrial uses). The nitrate and chloride contents indicated values of 18ppm and 0.3ppm respectively.
VL  - 5
IS  - 6
ER  -

Copy | Download