International Journal of Science, Technology and Society

| Peer-Reviewed |

Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number

Received: 02 November 2015    Accepted: 25 November 2015    Published: 04 January 2016
Views:       Downloads:

Share This Article

Abstract

The following work is the CFD analysis of NACA 23024 airfoil. The analysis is carried out for a free stream Reynolds number of 6 million for which the wind tunnel results are available. The CFD analysis is carried out using Ansys Fluent Solver. The analysis is carried out using Spalart Allmaras turbulence model, K-omega SST turbulence model with flow transition capabilities, Standard K-Epsilon Turbulence model and K-omega SST turbulence model.It is to be noted that each turbulence model employs different mathematical approach to model boundary layer. The analysis results are then compared with the wind tunnel results and the performance of the turbulence models are discussed. This study recommends an accurate methodology to conduct CFD analysis for external aerodynamic flows.

DOI 10.11648/j.ijsts.20150306.17
Published in International Journal of Science, Technology and Society (Volume 3, Issue 6, November 2015)
Page(s) 315-321
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

NACA 23024, Turbulence Models, Lift Curve, Drag Curve, Stalling

References
[1] David Hartwanger et.al “3 D modeling of a Wind Turbine using CFD” NAFEMS Conference, United Kingdom, 2008.
[2] Frank Bertagnolio et.al “Wind Turbine airfoil catalogue” RISOE National Laboratories, Denmark, 2001.
[3] H. Gao et.al “Computational study of unsteady flows around dragonfly and smooth airfoils at low Reynolds number” 46th AIAA Aerospace sciences meeting and exhibit, Reno, Navada, 2008.
[4] Vance Dippold, III, “Investigation of Wall Function and Turbulence Model Performance within the Wind Code”, 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10 - 13 January 2005, Reno, Nevada.
[5] S. Sarada, M. Shiva Shankar and Rudresh Ganganna “Numerical simulation of Viscous, incompressible flow around NACA 64618 subsonic airfoil using Computational Fluid Dynamics”, Proceedings of National conference on advances in Mechanical Engineering, Allied Publishers Pvt Ltd, 2012.
[6] Menter, F. R., “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications” AIAA Journal, Vol. 32, No. 8, August 1994, pp. 1598-1605 (http://turbmodels.larc.nasa.gov/sst.html).
[7] Abbott. I.H, “Theory of wing section, including a summary of airfoil data”, Dover book on Physics, 1995.
[8] Menter FR, 1994, Two Equation Eddy-viscosity turbulence model for Engineering Applications, AIAA journal, USA, Volume 32, No.8, pp. 1598-1605.
[9] Drishtysingh Ramdenee, H. Ibrahim, N. Barka, A. Ilinca, 2013, Modeling of aerodynamic flutter on a naca 4412 airfoil wind blade, International Journal of Simulation and Process Modelling, Inderscience Publishers, Canada, Volume 8, No. 1 , pp. 79-87.
[10] Douvi C. Eleni, Tsavalos I. Athanasios and Margaris P. Dionissios, Evaluation of the turbulence models for the simulation of the flow over a National Advisory Committee for Aeronautics (NACA) 0012 airfoil, Department of Mechanical Laboratory, University of Patras, 26500 Patras, Greece, Journal of Mechanical Engineering Research Vol 4(3), pp. 100-111, March 2012 ISSN 2141-2383.
[11] Bacha WA, Ghaly WS (2006). Drag Prediction in Transitional Flow over Two-Dimensional Airfoils, Proceedings of the 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV.
[12] Menter FR (1994). Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications. AIAA J., 32: 1598-1605.
[13] Spalart, PR, Allmaras SR (1992). A One-Equation Turbulence Model for Aerodynamic Flows. AIAA Paper, pp. 92-439.
[14] Michealamitay, Douglas R Smith, Valdis Kibens, David E. Parekh and Ali Glezer. “Aerodynamic flow control over unconventional airfoil using synthetic jet actuators”. AIAA journal. V39, no1, march 2001.
[15] Gaurav Saxena, Mahendra Agarwal. “Aerodynamic analysis of NACA 4412 airfoil using CFD”. International journal of emerging trends in engineering and development. Issue 3, vol 4, july 2013.
Author Information
  • Department of Mechanical Engineering, BNMIT, Visveswaraya Technological University, Bangalore, India

  • Department of Mechanical Engineering, PESCE, Visveswaraya Technological University, Mandya, India

  • Department of Mathematics, BNMIT, Visveswaraya Technological University, Bangalore, India

  • Niharika Institute of Computational Engineering (NICECFD), Bangalore, India

Cite This Article
  • APA Style

    B. S. Anil Kumar, Ramalingaiah, S. Manjunath, Rudresh Ganganna. (2016). Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number. International Journal of Science, Technology and Society, 3(6), 315-321. https://doi.org/10.11648/j.ijsts.20150306.17

    Copy | Download

    ACS Style

    B. S. Anil Kumar; Ramalingaiah; S. Manjunath; Rudresh Ganganna. Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number. Int. J. Sci. Technol. Soc. 2016, 3(6), 315-321. doi: 10.11648/j.ijsts.20150306.17

    Copy | Download

    AMA Style

    B. S. Anil Kumar, Ramalingaiah, S. Manjunath, Rudresh Ganganna. Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number. Int J Sci Technol Soc. 2016;3(6):315-321. doi: 10.11648/j.ijsts.20150306.17

    Copy | Download

  • @article{10.11648/j.ijsts.20150306.17,
      author = {B. S. Anil Kumar and Ramalingaiah and S. Manjunath and Rudresh Ganganna},
      title = {Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number},
      journal = {International Journal of Science, Technology and Society},
      volume = {3},
      number = {6},
      pages = {315-321},
      doi = {10.11648/j.ijsts.20150306.17},
      url = {https://doi.org/10.11648/j.ijsts.20150306.17},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijsts.20150306.17},
      abstract = {The following work is the CFD analysis of NACA 23024 airfoil. The analysis is carried out for a free stream Reynolds number of 6 million for which the wind tunnel results are available. The CFD analysis is carried out using Ansys Fluent Solver. The analysis is carried out using Spalart Allmaras turbulence model, K-omega SST turbulence model with flow transition capabilities, Standard K-Epsilon Turbulence model and K-omega SST turbulence model.It is to be noted that each turbulence model employs different mathematical approach to model boundary layer. The analysis results are then compared with the wind tunnel results and the performance of the turbulence models are discussed. This study recommends an accurate methodology to conduct CFD analysis for external aerodynamic flows.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number
    AU  - B. S. Anil Kumar
    AU  - Ramalingaiah
    AU  - S. Manjunath
    AU  - Rudresh Ganganna
    Y1  - 2016/01/04
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijsts.20150306.17
    DO  - 10.11648/j.ijsts.20150306.17
    T2  - International Journal of Science, Technology and Society
    JF  - International Journal of Science, Technology and Society
    JO  - International Journal of Science, Technology and Society
    SP  - 315
    EP  - 321
    PB  - Science Publishing Group
    SN  - 2330-7420
    UR  - https://doi.org/10.11648/j.ijsts.20150306.17
    AB  - The following work is the CFD analysis of NACA 23024 airfoil. The analysis is carried out for a free stream Reynolds number of 6 million for which the wind tunnel results are available. The CFD analysis is carried out using Ansys Fluent Solver. The analysis is carried out using Spalart Allmaras turbulence model, K-omega SST turbulence model with flow transition capabilities, Standard K-Epsilon Turbulence model and K-omega SST turbulence model.It is to be noted that each turbulence model employs different mathematical approach to model boundary layer. The analysis results are then compared with the wind tunnel results and the performance of the turbulence models are discussed. This study recommends an accurate methodology to conduct CFD analysis for external aerodynamic flows.
    VL  - 3
    IS  - 6
    ER  - 

    Copy | Download

  • Sections