A Review on Different Factors of Woven Fabrics’ Strength Prediction

Mohammad Mobarak Hossain; Eshita Datta; Salvia Rahman

doi:doi:10.11648/j.sr.20160403.13

| Peer-Reviewed

A Review on Different Factors of Woven Fabrics’ Strength Prediction

Mohammad Mobarak Hossain, Eshita Datta, Salvia Rahman

Published in Science Research (Volume 4, Issue 3)

Received: 8 May 2016 Accepted: 19 May 2016 Published: 13 June 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

There are different fabric manufacturing methods like weaving, knitting, non-woven and braiding. Among them woven fabric shows good dimensional stability and good cover. One of the most important characteristics of woven fabric is strength. Strength is also measured in tensile, tearing or bursting strength. But, so many factors are related to the fabric strength like yarn count, twist, fibre fineness, stiffness, fibre density, fabric structure, cover, yarn density, no. of layer, tightness factor and so on. It is very complex to establish a mathematical relation to determine strength considering all these parameters. This paper will make the clear understanding on the factors that directly or indirectly influence the woven fabric’s strenght and thus, will be more helpful during further research in woven fabric strenght prediction.

Published in	Science Research (Volume 4, Issue 3)
DOI	10.11648/j.sr.20160403.13
Page(s)	88-97
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Yarn Strength, Woven Fabric Strength, Weave’s Factors

References

[1]	Realff, M. L.; Boyce, M. C.; and Backer S.; “Amicro-mechanical model of the tensile behavior of woven fabric” Textile Research Journal, 67, 1997, 445-459.
[2]	Chattopadhyay, R.; “Design of apparel fabrics: role of fiber, yarn and fabric parameters on its functional attributes” Journal of Textile Engineering 54, 2008, 179-190.
[3]	Gabrijelcic, H; Cernosa, E and Dimitrovski, K.; “Influence of weave and weft characteristics on tensile properties of fabrics” Fibers and Textiles in Eastern Europe 16, 2 (67), 2008, 45-51.
[4]	Peirce F. T.; “The Geometry of the Cloth Structure”, Journal of Textile Institute, 28, 1937, 45-96.
[5]	Brierley, S.; “Cloth Setting reconsidered IV”, Textile Manufacturer, 79, 1952, 533-537.
[6]	Love L., “Graphical Relationships in Cloth Geometry for plain, Twill and Sateen weaves”, Textile Research Journal, 24, 1954, 1073-1083
[7]	Hamilton J. B.; “A General System of Woven Fabric Geometry”, Journal of Textile Institute, 55, 1964, 66-82.
[8]	Milasius V. and Reklaitis V.; “The Principles of Weave coding”, Journal of Textile Institute, 79, 1988, 598-605.
[9]	Milasius V.; “An Integrated Structure Factor for Woven Fabrics Part I: Estimation of the Weave” Journal of Textile Institute, 2, 2000a, 268-276.
[10]	Newton A.; “The Comparison of Woven Fabrics by Reference to their Tightness”, Journal of Textile Institute, 86(2), 1995, 232-240.
[11]	Russell W. H.; “Help for Designers”, Textile Ind., 129, 1965, 51-53.
[12]	Singh N.; “Weave Factors of Different Woven Constructions”, B. Tech Project Report, IIT Delhi, 2007.
[13]	De Jong, S. and Postle R.; “An energy analysis of woven fabric mechanics by means of optimal control theory Part 1: Tensile Properties”, Journal of Textile Institute, 68(11), 1977, 350-361.
[14]	Haussy B. et al; “Homogenization of the undulations of a single yarn. Applications to the modeling of traction”, International Journal of Mechanical Sciences, 46, 2004, 961-979.
[15]	Hearle J. W. S. and Shanahan J. W.; “An Energy Method for Calculations in Fabric Mechanics Part 1: Principles of the method”, Journal of Textile Institute, 69, 1978, 81-89.
[16]	Kawabata S, Niwa M and Kawai H.; “The finite-deformation theory of plain weaves Part II- The Uniaxial-deformation theory”, Journal of Textile Institute, 64 (2), 1973b, 47-61.
[17]	Kawabata S., Niwa M. and Kawai H.; “A finite deformation theory of the 2/2 Twill weave under Biaxial extension”, Journal of Textile Institute, 70 (10), 1979, 417-426.
[18]	Kawabata S., Niwa M. and Kawai H.; “A finite deformation theory of the 2/2 Twill weave under Biaxial extension”, Journal of Textile Institute, 70 (10), 1979, 417-426.
[19]	Leaf G. A. V., Kandil K. H.; “The initial Load Extension behavior of plain woven fabrics”, Journal of Textile Institute, 71(1), 1980, 1-7.
[20]	[20] Ünal, P. and Taşkın, C., ‘% 100 Poliester Kumaşlarda Dokunun ve Sıklıkların Kopma Mukavemetine Etkisi’, Tekstil ve Konfeksiyon, Vol: 17(2), 2007, pp:115-118.
[21]	Oğulata, R.T. and Kadem, F.D., ‘Boyalı İpliklerden Üretilen FarklıK on strüksiyonlardaki % 100 Pamuklu Kumaşlarda Kumaş Kopma Mukavemetin in Regrasyon Analizi ile Tahminlenmesi’, Tekstil ve Konfeksiyon, Vol: 18(3), 2008, pp: 185-190.
[22]	Şekerden, F. and Çelik, N., ‘Atkı Elastanlı Dokuma ve Kumaş Karakteristikleri’, Tekstil ve Konfeksiyon, Vol: 20(2), 2010, pp: 120-129.
[23]	Mehta, H. U., Gupta, K. C., Bhatt, V. R., Somashekar, T. H., Modi, C. A. and Malatesh, S., ‘Effect of Construction and Weave on Some Mechanical Properties of Untreated and Resin-Treated Cotton Fabrics’, Textile Research Journal, Vol: 48(9), 1978, pp: 512-517.
[24]	Shahpurwala, A. and Schwartz, P., ‘Modeling Woven Fabric Tensile Strength Using Statistical Bundle Theory’, Textile Research Journal, Vol: 59(1), 1989, pp: 26-32.
[25]	Seyam, A. and El-Shiekh, A., 1995, ‘Mechanics of Woven Fabrics: Part V: Impact of Weavability Limit Parameters on Properties of Fabrics from Yarns with Thickness Variation’, Textile Research Journal, Vol: 65(1), pp: 14-25.
[26]	Mariatti, M., Nasir, M. and Ismail, H., 2000, ‘Influence of Different Woven Geometry and Ply Effect in Woven Thermoplastic Composite Behaviour-Part 2, International Journal of Polymeric Materials, Vol: 47, pp: 499-512.
[27]	Bilisik, A. K. and Turhan, Y., 2009, ‘Multidirectional Stitched Layered Aramid Woven Fabric Structures and their Experimental Characterization of Ballistic Performance’, Textile Research Journal, Vol: 79(14), pp: 1331-1343.
[28]	Bilisik, A. K. and Korkmaz, M., 2010, ‘Multilayered and Multi directionally-stitched Aramid Woven Fabric Structures: Experimental Characterization of Ballistic Performance by Considering the Yarn Pull-out Test’, Textile Research Journal, Vol: 80(16), pp: 1697-1720.
[29]	Sun, B., Wang, Y., Hu, P. W. H. and Gu, B., 2011, ‘Investigations of Puncture Behaviours of Woven Fabrics from Finite Element Analyses and Experimental Tests’, Textile Research Journal, Vol: 81(10), pp: 992–1007.
[30]	Chen, F., Wang, G., Li, L. and Cheng, H., 2011, ‘Mechanical Properties of a Woven Ramie Fabric Under Multidimensional Loadings’, Textile Research Journal, Vol: 81(12), pp: 1226-1233.
[31]	Ning Pan, ‘Analysis of woven fabric strengths: prediction of fabric strength under uniaxial and biaxial extensions’,Composite Science and Technology 56 (1996), ISBN: 0266-3538(95)00114-X, pp. 311-327.
[32]	Mine AKGÜN, Gülcan SÜLE, Halil Rifat ALPAY and Recep EREN, ‘Influence of warp tension on breaking strength and strain of woven fabrics’, TEKSTIL ve KONFEKSIYON, Volume: 20(1), 2010, ISSN:1300-1356.
[33]	Kotb N., El Geiheini A., Salman A., Abdel-Samad A.: ‘Engineering of tearing strength for pile farics’, Journal of Textile and Apparel Technology and Management, Vol-6(1), 2009.
[34]	Malik Z. A., Malik M. H., Hussain T., Tanwari A.,’Predicting strength transfer efficiency of warp and weft yarns in woven fabrics using adaptive neuro-fuzzy inference system’, Indian Journal of Fibre and Textile Research, Vol- 35, December, 2010, pp. 310-316.
[35]	Saville B. P., 2002, “Physical Testing of Textiles”, Woodhead Publishing Limited, pp: 115-167.
[36]	Greenwood, K., “Weaving: Control of Fabric Structure”, Merrow Publishing, Durham, 1975, pp: 12-14.
[37]	Lord, P. R., Mohamed, M. H., “Weaving. Conversion of Yarn to Fabric”, 1982, Merrow Publishing.
[38]	Mohamed, M. H., Lord, P. R., 1973, “Comparison of Physical Properties of Fabrics Woven from Open-End and Ring Spun Yarns”, Textile Research Journal, Vol. 43(3), pp: 154-166.
[39]	Taylor H M, Tensile and Tearing Strength of Cotton Cloths, Journal of the Textile Inst. 50, 1959, T161-T188.
[40]	Brody H, Synthetic Fibre Materials, Longman Group, U.K. 1994.
[41]	Mukhopadhyay A., Ghosh S. And Bhaumik S. Tearing and tensile strength behaviour of military khaki fabrics form grey to finished process, International Journal of Clothing Science and Technology, Vol. 18, No. 4 (2006), pp. 247-264.
[42]	Teixeira NA, Platt M M, and Hamburger W J, Mechanics of Elastic Performance of Textile Materials, Part XII: Relation of Certain Geometric Factors to the Tear Strength of woven Fabric, Textile Res. J.25, (1955) 838-861.
[43]	Lijing Wang, Martin Felder, Jackie Y. Cai, ‘Study of Properties of Medical Compression Fabrics’, Journal of Fiber Bioengineering and Informatics, 4:1 (2011), 15-22.
[44]	Jinlian HU, ‘Fabric Testile’, Woodhead Publishing Limited, Cambride England, 1^st Edition, 2008, pp. 92-104.
[45]	Kothari V. K., ‘Testing and Quality Management’, IAFL Publications, New Delhi, India, 1^st edition, ISBN: 81-901033-0-X, pp. 326-332.
[46]	Booth J. E., ‘Principle of Textile Testing’, J. W. Arrowsmith Ltd, Bristol, 3^rd Edition reprint 2007, pp. 208-284.
[47]	Carl A. Lawrence, ‘Fundamentals of spun yarn technology’, CRC Press, Washington, D.C., 2003, Chapter-1.
[48]	[Ashenhurst TR., A Treatise on Textile Calculations and the Structure of Fabrics. Huddersfield, 1884, p. 245.
[49]	Armitage E, Huddersfield, Text Soc J. (1907-8).
[50]	Law. W., Wool Record and Textile World, 1922, Vol. 21, 968.
[51]	Brierley S.: Theory and Practice of Cloth Setting. The Textile Manuf., 1931, 58(3 – 4): pp. 4749, 130-132, 206-208,244-246.
[52]	Chamberlain N H & Snowden D C, J Text Inst, 39 (1948), T23.
[53]	Snowden D C, J Text Inst, 40 (1949), p.317.
[54]	Dickson, J. B., Practical Loom Experience on Weavability Limits, Textile Research Journal, 1954, Vol. 24, No. 12, 1083-1093.
[55]	Galceran V., Tecnologia del Tejido. 1961, Terrasa, Spain (Spanish).
[56]	Galceran V., Tecnologia del Tejido (Weaving Technology), Terrassa: Technical University of Catalonia (in Spanish) (1962).
[57]	Skliannikov VP., About coefficient of Surface Cover of Woven Fabrics (in Russian). Tekstiljnaja promyshlennostj, 1964; 6: 32-36.
[58]	Galuszynski S, Ellis P. Some Effects of the Fabric Elastic Constant on the Dynamics of Fabric Formation. The Journal of the Textile Institute, 1983; 80, 6: 357-365.
[59]	R. Milašius, V. Milašius, E. Kumpikaitė, A. Olšauskienė. Development of Employment of Fabric Firmness Factor ϕ, Transactions of Conference“ArchTex-2002”, Lodz, 2003, p. 31-39.
[60]	Morino H., Matsudaira M., Furutani M., Predicting Mechanical Properties and Hand Values from the Parameters of Weave Structures. Textile Res. J., 2005, 75 (3): p. 252-257.
[61]	Milašius A, Milašius V.: New Representation of the Fabric Weave Factor. Fibres & Textiles in Eastern Europe 2008; 16, 4(69):48-51.
[62]	Naveen V Padaki, Alagirusamy R, Deopura BL, Fangueiro R. Studies on Preform Properties of Multilayer Interlocked Woven Structures Using Fabric Geometrical Factors. J Ind Tex 2010; 39, 4: 327-346.
[63]	Jinlian Hu, Structure and Mechanics of Woven Fabrics, Woodhead Publishing Limited, 2004, 185573 904 6 Cambridge.
[64]	Zulfiqar Ali Malik, Tanveer Hussain: ‘Development of Models to predict Tensile Strength of Cotton Woven Fabrics’, Journal of Engineered Fibers and Fabrics, Vol. 6, Issue 4-2011, pp. 47-53.
[65]	Mazhar Hussain Peerzada, Sadaf Aftab Abbasi, Awais Khatri, ‘Effect of Weave Structure on Tensile Strength and Yarn Crimp of Three-Dimensional Fibre Woven Fabric’, Sci. Int. (Lahore), 2012, Vol. 24 (1), pp. 47-50.
[66]	Rukuižienė Ž, Kumpikaitė E. ‘Investigation of Initial Warp Tension and Weave Influence on Warp Yarn Diameter Projections’, FIBRES & TEXTILES in Eastern Europe 2013; 21, 5(101): 43-48.
[67]	HAVLOVÁ M., ‘Influence of Vertical Porosity on Woven Fabric Air Permeability’, 7 th International Conference – TEXSCI, 2010 September 6-8, Liberec, Czech Republic.
[68]	HAVLOVÁ M., ‘Air Permeability and Constructional Parameters of Woven Fabrics’, FIBRES & TEXTILES in Eastern Europe, 2013, Vol. 21, 2(98), pp. 84-89.
[69]	HAVLOVÁ M., ‘Model of Vertical Porosity Occurring in Woven Fabrics and its Effect on Air Permeability’, FIBRES & TEXTILES in Eastern Europe 2014, Vol. 22, 4(106), pp. 58-63.
[70]	Hakan ÖZDEMİR, Engin MERT, ‘The Effects of Fabric Structural Parameters on the Breaking, Bursting and Impact Strengths of Diced Woven Fabrics’, TEKSTİL VE KONFEKSİYON, 2013, Vol. 23(2), pp. 113-123.
[71]	M. D. Teli, A. R. Khare, Ruma Chakrabarti, ‘Dependence of Yarn and Fabric Strength on the Structural Parameters’, AUTEX Research Journal, 2008, Vol. 8, No. 3, pp. 63-67.
[72]	Abou-Nassif GA, ‘Predicting the Tensile and Air Permeability Properties of Woven Fabrics Using Artificial Neural Network and Linear Regression Models’. J Textile Sci Eng, 2015, Vol. 5 (5), 5-209.
[73]	Meysam Moezzi, Mohammad Ghane, Dariush Semnani, ‘Predicting the Tensile Properties of UV Degraded Nylon66/Polyester Woven Fabric Using Regression and Artificial Neural Network Models’, Journal of Engineered Fibers and Fabrics, 2015, Vol. 10(1 ), pp. 1-11.
[74]	Swapna Mishra, ‘Prediction of Yarn Strength Utilization in Cotton Woven Fabrics Using Artificial Neural Network’, Journal of The Institution of Engineers (India), Vol. 96(2), pp. 151-157.

Cite This Article

Plain Text BibTeX RIS

APA Style

Mohammad Mobarak Hossain, Eshita Datta, Salvia Rahman. (2016). A Review on Different Factors of Woven Fabrics’ Strength Prediction. Science Research, 4(3), 88-97. https://doi.org/10.11648/j.sr.20160403.13

Copy | Download

ACS Style

Mohammad Mobarak Hossain; Eshita Datta; Salvia Rahman. A Review on Different Factors of Woven Fabrics’ Strength Prediction. Sci. Res. 2016, 4(3), 88-97. doi: 10.11648/j.sr.20160403.13

Copy | Download

AMA Style

Mohammad Mobarak Hossain, Eshita Datta, Salvia Rahman. A Review on Different Factors of Woven Fabrics’ Strength Prediction. Sci Res. 2016;4(3):88-97. doi: 10.11648/j.sr.20160403.13

Copy | Download

@article{10.11648/j.sr.20160403.13,
  author = {Mohammad Mobarak Hossain and Eshita Datta and Salvia Rahman},
  title = {A Review on Different Factors of Woven Fabrics’ Strength Prediction},
  journal = {Science Research},
  volume = {4},
  number = {3},
  pages = {88-97},
  doi = {10.11648/j.sr.20160403.13},
  url = {https://doi.org/10.11648/j.sr.20160403.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sr.20160403.13},
  abstract = {There are different fabric manufacturing methods like weaving, knitting, non-woven and braiding. Among them woven fabric shows good dimensional stability and good cover. One of the most important characteristics of woven fabric is strength. Strength is also measured in tensile, tearing or bursting strength. But, so many factors are related to the fabric strength like yarn count, twist, fibre fineness, stiffness, fibre density, fabric structure, cover, yarn density, no. of layer, tightness factor and so on. It is very complex to establish a mathematical relation to determine strength considering all these parameters. This paper will make the clear understanding on the factors that directly or indirectly influence the woven fabric’s strenght and thus, will be more helpful during further research in woven fabric strenght prediction.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - A Review on Different Factors of Woven Fabrics’ Strength Prediction
AU  - Mohammad Mobarak Hossain
AU  - Eshita Datta
AU  - Salvia Rahman
Y1  - 2016/06/13
PY  - 2016
N1  - https://doi.org/10.11648/j.sr.20160403.13
DO  - 10.11648/j.sr.20160403.13
T2  - Science Research
JF  - Science Research
JO  - Science Research
SP  - 88
EP  - 97
PB  - Science Publishing Group
SN  - 2329-0927
UR  - https://doi.org/10.11648/j.sr.20160403.13
AB  - There are different fabric manufacturing methods like weaving, knitting, non-woven and braiding. Among them woven fabric shows good dimensional stability and good cover. One of the most important characteristics of woven fabric is strength. Strength is also measured in tensile, tearing or bursting strength. But, so many factors are related to the fabric strength like yarn count, twist, fibre fineness, stiffness, fibre density, fabric structure, cover, yarn density, no. of layer, tightness factor and so on. It is very complex to establish a mathematical relation to determine strength considering all these parameters. This paper will make the clear understanding on the factors that directly or indirectly influence the woven fabric’s strenght and thus, will be more helpful during further research in woven fabric strenght prediction.
VL  - 4
IS  - 3
ER  -

Copy | Download

Author Information

Mohammad Mobarak Hossain

Textile Engineering (Fabric), Department of Fabric Engineering, Faculty of Textile Engineering, Bangladesh University of Textiles (BUTex), Tejgaon Industrial Area, Dhaka, Bangladesh
Eshita Datta

Textile Engineering (Yarn), Department of Yarn Engineering, Faculty of Textile Engineering, Bangladesh University of Textiles (BUTex), Tejgaon Industrial Area, Dhaka, Bangladesh
Salvia Rahman

Textile Engineering (Fabric), Department of Fabric Engineering, Faculty of Textile Engineering, Bangladesh University of Textiles (BUTex), Tejgaon Industrial Area, Dhaka, Bangladesh

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mohammad Mobarak Hossain, Eshita Datta, Salvia Rahman. (2016). A Review on Different Factors of Woven Fabrics’ Strength Prediction. Science Research, 4(3), 88-97. https://doi.org/10.11648/j.sr.20160403.13

Copy | Download

ACS Style

Mohammad Mobarak Hossain; Eshita Datta; Salvia Rahman. A Review on Different Factors of Woven Fabrics’ Strength Prediction. Sci. Res. 2016, 4(3), 88-97. doi: 10.11648/j.sr.20160403.13

Copy | Download

AMA Style

Mohammad Mobarak Hossain, Eshita Datta, Salvia Rahman. A Review on Different Factors of Woven Fabrics’ Strength Prediction. Sci Res. 2016;4(3):88-97. doi: 10.11648/j.sr.20160403.13

Copy | Download

@article{10.11648/j.sr.20160403.13,
  author = {Mohammad Mobarak Hossain and Eshita Datta and Salvia Rahman},
  title = {A Review on Different Factors of Woven Fabrics’ Strength Prediction},
  journal = {Science Research},
  volume = {4},
  number = {3},
  pages = {88-97},
  doi = {10.11648/j.sr.20160403.13},
  url = {https://doi.org/10.11648/j.sr.20160403.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sr.20160403.13},
  abstract = {There are different fabric manufacturing methods like weaving, knitting, non-woven and braiding. Among them woven fabric shows good dimensional stability and good cover. One of the most important characteristics of woven fabric is strength. Strength is also measured in tensile, tearing or bursting strength. But, so many factors are related to the fabric strength like yarn count, twist, fibre fineness, stiffness, fibre density, fabric structure, cover, yarn density, no. of layer, tightness factor and so on. It is very complex to establish a mathematical relation to determine strength considering all these parameters. This paper will make the clear understanding on the factors that directly or indirectly influence the woven fabric’s strenght and thus, will be more helpful during further research in woven fabric strenght prediction.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - A Review on Different Factors of Woven Fabrics’ Strength Prediction
AU  - Mohammad Mobarak Hossain
AU  - Eshita Datta
AU  - Salvia Rahman
Y1  - 2016/06/13
PY  - 2016
N1  - https://doi.org/10.11648/j.sr.20160403.13
DO  - 10.11648/j.sr.20160403.13
T2  - Science Research
JF  - Science Research
JO  - Science Research
SP  - 88
EP  - 97
PB  - Science Publishing Group
SN  - 2329-0927
UR  - https://doi.org/10.11648/j.sr.20160403.13
AB  - There are different fabric manufacturing methods like weaving, knitting, non-woven and braiding. Among them woven fabric shows good dimensional stability and good cover. One of the most important characteristics of woven fabric is strength. Strength is also measured in tensile, tearing or bursting strength. But, so many factors are related to the fabric strength like yarn count, twist, fibre fineness, stiffness, fibre density, fabric structure, cover, yarn density, no. of layer, tightness factor and so on. It is very complex to establish a mathematical relation to determine strength considering all these parameters. This paper will make the clear understanding on the factors that directly or indirectly influence the woven fabric’s strenght and thus, will be more helpful during further research in woven fabric strenght prediction.
VL  - 4
IS  - 3
ER  -

Copy | Download