Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions

Parker Alan Hines; Torrey John Wagner; Clay Michael Koschnick; Steven James Schuldt

doi:doi:10.11648/j.jenr.20190802.15

| Peer-Reviewed

Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions

Parker Alan Hines, Torrey John Wagner, Clay Michael Koschnick, Steven James Schuldt

Published in Journal of Energy and Natural Resources (Volume 8, Issue 2)

Received: 15 April 2019 Accepted: 23 May 2019 Published: 10 June 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This research presents the development of linear regression models to predict horizontal photovoltaic power output. We collected a dataset from 14 global Department of Defense (DoD) installations over a timeframe of one year using an experimental apparatus, resulting in 24,179 usable data points. We developed a linear model to predict power output, which incorporated site-specific weather and geographical characteristics, along with Köppen-Geiger climate classifications in order to determine the effect of adding climate to the model. After performing a Wald test between the full model and a reduced model without Köppen-Geiger climate variables, it was determined that including Köppen-Geiger climate variables improved the model’s ability to account for horizontal photovoltaic power variation by 3%. Although adding Köppen-Geiger variables provided added value when modeling the training dataset, these variables were less effective in predicting the validation dataset. From the analysis, the ideal Köppen-Geiger region was determined to be a warm temperate main classification, a fully humid precipitation classification and a warm summer temperature classification. This region possessed a 30% greater average power production than the mean value of the base climate classification. We found that the cost-effectiveness of a photovoltaic array depends on Köppen-Geiger climate regions, in addition to weather characteristics and the orientation of the array.

Published in	Journal of Energy and Natural Resources (Volume 8, Issue 2)
DOI	10.11648/j.jenr.20190802.15
Page(s)	77-86
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Köppen-Geiger, Photovoltaic Cells, Linear Regression, Renewable Energy, Energy Resilience

References

[1]	U. Kumar, K. Soon, M. Seyedmahmoudian, and S. Mekhilef, “Forecasting of photovoltaic power generation and model optimization : A review,” Renew. Sustain. Energy Rev., vol. 81, no. June 2017, pp. 912–928, 2018.
[2]	J. A. Vásquez, K. Brecl, and M. Topič, “Köppen -Geiger-Photovoltaic Climate Classification,” 7th World Conf. Photovolt. Energy Convers. Kona, Hawaii, 2018.
[3]	J. H. Nussbaum, “Analyzing the Viability of Photovoltaic Pavement Systems: A Study In Structural Testing Methods, Measuring Potential Power, and Quantifying the Risks of Implementation,” Air Force Institute of Technology, 2017.
[4]	C. J. Booker, “Analysis of Temperature and Humidity Effects on Horizontal Photovoltaic Panels,” Air Force Institute of Technology, 2018.
[5]	J. A. Applebee, “Determining the Viability and Efficiency of GP3L Photovoltaic System Study At Air Force Installations in Various Climate Regions Air Force Institute of Technology,” Air Force Institute of Technology, 2018.
[6]	M. Belda, E. Holtanová, T. Halenka, and J. Kalvová, “Climate classification revisited: From Köppen to Trewartha,” Clim. Res., vol. 59, no. 1, pp. 1–13, 2014.
[7]	M. Kottek, J. Grieser, C. Beck, B. Rudolf, and F. Rubel, “World map of the Köppen-Geiger climate classification updated,” Meteorol. Zeitschrift, vol. 15, no. 3, pp. 259–263, 2006.
[8]	C. Beck, J. Grieser, M. Kottek, F. Rubel, and B. Rudolf, “Characterizing global climate change by means of Koeppen climate classification,” Clim. Status Rep. 2005, p. 10, 2006.
[9]	D. C. Jordan, J. H. Wohlgemuth, and S. R. Kurtz, “Technology and climate trends in PV module degradation,” 27th Eur. Photovolt. Sol. Energy Conf. Exhib., pp. 3118–3124, 2012.
[10]	I. Mahlstein, J. S. Daniel, and S. Solomon, “Pace of shifts in climate regions increases with global temperature,” Nat. Clim. Chang., vol. 3, no. 8, pp. 739–743, 2013.
[11]	F. P. Tso, D. R. White, S. Jouet, J. Singer, and D. P. Pezaros, “The Glasgow raspberry Pi cloud: A scale model for cloud computing infrastructures,” Proc. - Int. Conf. Distrib. Comput. Syst., pp. 108–112, 2013.
[12]	V. Vujovic, V. Vujović, and M. Maksimović, “Raspberry Pi as a Wireless Sensor node : Performances and constraints Raspberry Pi as a Wireless Sensor Node : Performances and Constraints,” 2014 37th Int. Conv. Inf. Commun. Technol. Electron. Microelectron. MIPRO 2014 - Proc., pp. 26–30, 2014.
[13]	Y. Sharon, B. Khachatryan, and D. Cheskis, “Low current Hall Effect Sensor,” 2018.
[14]	NOAA, “National Oceanic and Atmospheric Administration.”.
[15]	M. A. Green, K. Emery, Y. Hishikawa, W. Warta, and E. D. Dunlop, “Solar cell efﬁciency tables (version 43),” Prog. Photovoltaics Res. Appllications, vol. 22, pp. 1–9, 2015.
[16]	National Optical Astronomy Observatory, “Recommended Light Levels (Illuminance) for Outdoor and Indoor Venues.”.
[17]	A. Ã. Virtuani, E. Lotter, and M. Powalla, “Influence of the light source on the low-irradiance performance of Cu (In, Ga) Se 2 solar cells,” vol. 90, pp. 2141–2149, 2006.
[18]	O. Zogou, “Experimental and computational investigation of the thermal and electrical performance of a new building integrated photovoltaic concept,” 2011.
[19]	E. Skoplaki and J. A. Palyvos, “On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations,” Sol. Energy, vol. 83, no. 5, pp. 614–624, 2009.
[20]	M. M. Fouad, L. A. Shihata, and E. S. I. Morgan, “An integrated review of factors influencing the performance of photovoltaic panels,” Renew. Sustain. Energy Rev., vol. 80, pp. 1499–1511, 2017.
[21]	F. H. Gandoman, S. H. E. Abdel, N. Omar, A. Ahmadi, and F. Q. Alenezi, “Short-term solar power forecasting considering cloud coverage and ambient temperature variation effects,” Renew. Energy, vol. 123, pp. 793–805, 2018.
[22]	C. J. Smith, J. M. Bright, and R. Crook, “Cloud cover effect of clear-sky index distributions and differences between human and automatic cloud observations,” Sol. Energy, vol. 144, pp. 10–21, 2017.
[23]	P. Kuhn et al., “Benchmarking three low-cost, low-maintenance cloud height measurement systems and ECMWF cloud heights against a ceilometer,” Sol. Energy, vol. 168, pp. 140–152, 2018.
[24]	J. Antonanzas, R. Urraca, F. J. Martinez-de-Pison, and F. Antonanzas, “Optimal solar tracking strategy to increase irradiance in the plane of array under cloudy conditions: A study across Europe,” Sol. Energy, vol. 163, pp. 122–130, 2018.
[25]	D. King, W. Boyson, and J. Kratochvil, “Analysis of factors influencing the annual energy production of photovoltaic systems,” in Photovoltaic Specialists, IEEE Conference, 2002, pp. 1356–1361.
[26]	A. J. Gutiérrez-trashorras, E. Villicaña-ortiz, E. Álvarez-álvarez, J. M. González-caballín, J. Xiberta-bernat, and M. J. Suarez-lópez, “Attenuation processes of solar radiation. Application to the quantification of direct and diffuse solar irradiances on horizontal surfaces in Mexico by means of an overall atmospheric transmittance,” Renew. Sustain. Energy Rev., vol. 81, pp. 93–106, 2018.
[27]	A. Nagengast, C. Hendrickson, and H. Scott Matthews, “Variations in photovoltaic performance due to climate and low-slope roof choice,” Energy Build., vol. 64, pp. 493–502, 2013.
[28]	M. Kutner, C. Hachtsheim, J. Neter, and W. Li, Applied Linear Statistical Models, 5th ed. McGraw-Hill Irwin, 2005.
[29]	J. McClave, P. Benson, and T. Sincich, Statistics for Business and Economics, 12th ed. Pearson, 2014.
[30]	A. Zeileis, T. Lumley, S. Berger, and N. Graham, “Robust Covariance Matrix Estimators.” 2018.

Cite This Article

Plain Text BibTeX RIS

APA Style

Parker Alan Hines, Torrey John Wagner, Clay Michael Koschnick, Steven James Schuldt. (2019). Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions. Journal of Energy and Natural Resources, 8(2), 77-86. https://doi.org/10.11648/j.jenr.20190802.15

Copy | Download

ACS Style

Parker Alan Hines; Torrey John Wagner; Clay Michael Koschnick; Steven James Schuldt. Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions. J. Energy Nat. Resour. 2019, 8(2), 77-86. doi: 10.11648/j.jenr.20190802.15

Copy | Download

AMA Style

Parker Alan Hines, Torrey John Wagner, Clay Michael Koschnick, Steven James Schuldt. Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions. J Energy Nat Resour. 2019;8(2):77-86. doi: 10.11648/j.jenr.20190802.15

Copy | Download

@article{10.11648/j.jenr.20190802.15,
  author = {Parker Alan Hines and Torrey John Wagner and Clay Michael Koschnick and Steven James Schuldt},
  title = {Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions},
  journal = {Journal of Energy and Natural Resources},
  volume = {8},
  number = {2},
  pages = {77-86},
  doi = {10.11648/j.jenr.20190802.15},
  url = {https://doi.org/10.11648/j.jenr.20190802.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20190802.15},
  abstract = {This research presents the development of linear regression models to predict horizontal photovoltaic power output. We collected a dataset from 14 global Department of Defense (DoD) installations over a timeframe of one year using an experimental apparatus, resulting in 24,179 usable data points. We developed a linear model to predict power output, which incorporated site-specific weather and geographical characteristics, along with Köppen-Geiger climate classifications in order to determine the effect of adding climate to the model. After performing a Wald test between the full model and a reduced model without Köppen-Geiger climate variables, it was determined that including Köppen-Geiger climate variables improved the model’s ability to account for horizontal photovoltaic power variation by 3%. Although adding Köppen-Geiger variables provided added value when modeling the training dataset, these variables were less effective in predicting the validation dataset. From the analysis, the ideal Köppen-Geiger region was determined to be a warm temperate main classification, a fully humid precipitation classification and a warm summer temperature classification. This region possessed a 30% greater average power production than the mean value of the base climate classification. We found that the cost-effectiveness of a photovoltaic array depends on Köppen-Geiger climate regions, in addition to weather characteristics and the orientation of the array.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions
AU  - Parker Alan Hines
AU  - Torrey John Wagner
AU  - Clay Michael Koschnick
AU  - Steven James Schuldt
Y1  - 2019/06/10
PY  - 2019
N1  - https://doi.org/10.11648/j.jenr.20190802.15
DO  - 10.11648/j.jenr.20190802.15
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 77
EP  - 86
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20190802.15
AB  - This research presents the development of linear regression models to predict horizontal photovoltaic power output. We collected a dataset from 14 global Department of Defense (DoD) installations over a timeframe of one year using an experimental apparatus, resulting in 24,179 usable data points. We developed a linear model to predict power output, which incorporated site-specific weather and geographical characteristics, along with Köppen-Geiger climate classifications in order to determine the effect of adding climate to the model. After performing a Wald test between the full model and a reduced model without Köppen-Geiger climate variables, it was determined that including Köppen-Geiger climate variables improved the model’s ability to account for horizontal photovoltaic power variation by 3%. Although adding Köppen-Geiger variables provided added value when modeling the training dataset, these variables were less effective in predicting the validation dataset. From the analysis, the ideal Köppen-Geiger region was determined to be a warm temperate main classification, a fully humid precipitation classification and a warm summer temperature classification. This region possessed a 30% greater average power production than the mean value of the base climate classification. We found that the cost-effectiveness of a photovoltaic array depends on Köppen-Geiger climate regions, in addition to weather characteristics and the orientation of the array.
VL  - 8
IS  - 2
ER  -

Copy | Download

Author Information

Parker Alan Hines

Department of Systems Engineering & Management, Air Force Institute of Technology, Wright-Patterson Air Force Base, United States of America
Torrey John Wagner

Department of Systems Engineering & Management, Air Force Institute of Technology, Wright-Patterson Air Force Base, United States of America
Clay Michael Koschnick

Department of Systems Engineering & Management, Air Force Institute of Technology, Wright-Patterson Air Force Base, United States of America
Steven James Schuldt

Department of Systems Engineering & Management, Air Force Institute of Technology, Wright-Patterson Air Force Base, United States of America

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Parker Alan Hines, Torrey John Wagner, Clay Michael Koschnick, Steven James Schuldt. (2019). Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions. Journal of Energy and Natural Resources, 8(2), 77-86. https://doi.org/10.11648/j.jenr.20190802.15

Copy | Download

ACS Style

Parker Alan Hines; Torrey John Wagner; Clay Michael Koschnick; Steven James Schuldt. Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions. J. Energy Nat. Resour. 2019, 8(2), 77-86. doi: 10.11648/j.jenr.20190802.15

Copy | Download

AMA Style

Parker Alan Hines, Torrey John Wagner, Clay Michael Koschnick, Steven James Schuldt. Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions. J Energy Nat Resour. 2019;8(2):77-86. doi: 10.11648/j.jenr.20190802.15

Copy | Download

@article{10.11648/j.jenr.20190802.15,
  author = {Parker Alan Hines and Torrey John Wagner and Clay Michael Koschnick and Steven James Schuldt},
  title = {Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions},
  journal = {Journal of Energy and Natural Resources},
  volume = {8},
  number = {2},
  pages = {77-86},
  doi = {10.11648/j.jenr.20190802.15},
  url = {https://doi.org/10.11648/j.jenr.20190802.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20190802.15},
  abstract = {This research presents the development of linear regression models to predict horizontal photovoltaic power output. We collected a dataset from 14 global Department of Defense (DoD) installations over a timeframe of one year using an experimental apparatus, resulting in 24,179 usable data points. We developed a linear model to predict power output, which incorporated site-specific weather and geographical characteristics, along with Köppen-Geiger climate classifications in order to determine the effect of adding climate to the model. After performing a Wald test between the full model and a reduced model without Köppen-Geiger climate variables, it was determined that including Köppen-Geiger climate variables improved the model’s ability to account for horizontal photovoltaic power variation by 3%. Although adding Köppen-Geiger variables provided added value when modeling the training dataset, these variables were less effective in predicting the validation dataset. From the analysis, the ideal Köppen-Geiger region was determined to be a warm temperate main classification, a fully humid precipitation classification and a warm summer temperature classification. This region possessed a 30% greater average power production than the mean value of the base climate classification. We found that the cost-effectiveness of a photovoltaic array depends on Köppen-Geiger climate regions, in addition to weather characteristics and the orientation of the array.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Analyzing the Efficiency of Horizontal Photovoltaic Cells in Various Climate Regions
AU  - Parker Alan Hines
AU  - Torrey John Wagner
AU  - Clay Michael Koschnick
AU  - Steven James Schuldt
Y1  - 2019/06/10
PY  - 2019
N1  - https://doi.org/10.11648/j.jenr.20190802.15
DO  - 10.11648/j.jenr.20190802.15
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 77
EP  - 86
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20190802.15
AB  - This research presents the development of linear regression models to predict horizontal photovoltaic power output. We collected a dataset from 14 global Department of Defense (DoD) installations over a timeframe of one year using an experimental apparatus, resulting in 24,179 usable data points. We developed a linear model to predict power output, which incorporated site-specific weather and geographical characteristics, along with Köppen-Geiger climate classifications in order to determine the effect of adding climate to the model. After performing a Wald test between the full model and a reduced model without Köppen-Geiger climate variables, it was determined that including Köppen-Geiger climate variables improved the model’s ability to account for horizontal photovoltaic power variation by 3%. Although adding Köppen-Geiger variables provided added value when modeling the training dataset, these variables were less effective in predicting the validation dataset. From the analysis, the ideal Köppen-Geiger region was determined to be a warm temperate main classification, a fully humid precipitation classification and a warm summer temperature classification. This region possessed a 30% greater average power production than the mean value of the base climate classification. We found that the cost-effectiveness of a photovoltaic array depends on Köppen-Geiger climate regions, in addition to weather characteristics and the orientation of the array.
VL  - 8
IS  - 2
ER  -

Copy | Download